|
|
PDF DS9097E Data sheet ( Hoja de datos )
| Número de pieza | DS9097E | |
| Descripción | COM Port Adapter | |
| Fabricantes | Dallas Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DS9097E (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
www.dalsemi.com
DS9097/DS9097E
COM Port Adapter
FEATURES
§ Provides a simple, low-cost interface to an
RS232C COM Port for reading and writing
iButtonTM devices (DS9097E required for
programming DS198x Add-Only iButtons)
§ Adapter is powered entirely from an RS232
interface (DS9097E may require optional
auxiliary 12V supply)
§ Standard DB-9 (DSD9097) or DB-25
(DS9097E) female connector for mating the
adapter to the COM Port of a computer and
RJ-11 connector for easy attachment of a
probe such as the DS9092GT
§ DS9097E has an additional 2.1 mm male
power jack to allow for an auxiliary 12V DC
supply for programming Add-Only iButtons
Pin assignment DS9097, DB-9
TXD (3), RXD (2), DTR (4), PC-Ground (5);
all other pins not connected
Pin assignment DS9097E, DB-25
TXD (2), RXD (3), DTR (20), RTS (4), PC-
Ground (7); all other pins not connected
www.DataSheet4U.com
Auxiliary supply should be a regulated 12V
@ 10 mA minimum, center=GND, outer
ring=V+ (Newark Electronics Stock No.
84F2081, Allied Electronics Stock No. 928-
9895, Stancor Model STA-300R, or
equivalent)
DESCRIPTION
The DS9097 COM Port Adapter is a simple, low-cost passive adapter which performs RS232C (±12V)
level conversion, allowing an iButton probe to be connected to the serial port of a computer so that a non-
EPROM iButton can be read and written directly. It can also read all EPROM-based iButtons. The serial
port must support a data transmission rate of 115.2 kbits/s in order to create the 1-WireTM time slots
correctly. Nearly all PCs support the required data rate and are fully compatible with the DS9097. Since
an 8-bit character (6 data bits plus start and stop bit) on the RS232 port operating at 115.2 kbits/s is used
to form a single 1-Wire time slot, the maximum effective 1-Wire transfer rate is 14.4 kbits/s (regular
speed). Details on the operation of the DS9097 including software examples are found in Application
Note 74, Section V.
1 of 2
102099
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet DS9097E.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DS9097 | COM Port Adapter | Dallas Semiconductor |
| DS9097E | COM Port Adapter | Dallas Semiconductor |
| DS9097U | Universal 1-Wire COM Port Adapter |  Dallas Semiconducotr |
| DS9097U-009 | Universal 1-Wire COM Port Adapter | Dallas Semiconducotr |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |