DataSheet.es    


PDF HMC-C061 Data sheet ( Hoja de datos )

Número de pieza HMC-C061
Descripción Double Edge Triggered D-Type Flip-Flop Module
Fabricantes Hittite Microwave Corporation 
Logotipo Hittite Microwave Corporation Logotipo



Hay una vista previa y un enlace de descarga de HMC-C061 (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! HMC-C061 Hoja de datos, Descripción, Manual

v01.0109
HMC-C061
50 Gbps, DOUBLE-EDGE TRIGGERED
D-TYPE FLIP-FLOP MODULE
www.datasheet4u.com
Typical Applications
The HMC-C061 is ideal for:
• OC-768 and SDH STM-256 Equipment
6 • Serial Data Transmission up to 50 Gbps
• Short, intermediate, and long haul
fiber optic applications
• Broadband Test and Measurement
Functional Diagram
Features
Supports data rates 50 Gbps
Half Rate Clock Input (1 MHz - 25 GHz)
Inputs Terminated Internally in 50 ohms
Supports Single-Ended or Differential Operation
Very Low Power Consumption: 690 mW
Less than 200 fs Additive RMS Jitter
Fast Rise and Fall Times: <10ps
Single -3.3 V Power Supply
Hermetically Sealed Module: 1.85mm connectors
-40°C to +70°C Operating Temperature
General Description
The HMC-C061 is a double edge triggered D-type Flip-
Flop (DETDFF) designed to support data transmission
rates of up to 50 Gbps. The device operates at half
the sampling frequency of the applied data rate. The
maximum clock rate is 25 GHz for 50 Gbps input data.
The clock input is broadband from DC to 25 GHz. During
normal operation, data is transferred to the outputs on
both the positive edge and the negative edge of the
clock. All input signals to the HMC-C061 are terminated
with 50 Ohms to ground on-chip, and may be either AC or
DC coupled. The differential outputs of the HMC-C061
may be either AC or DC coupled. Outputs can be
connected directly to a 50 Ohm to ground terminated
system, while DC blocking capacitors may be used if
the terminating system is 50 Ohms to a non-ground DC
voltage. The HMC-C061 operates from a single -3.3V
DC supply, and is housed in a hermetically sealed
module with 1.85mm connectors.
6 - 10
Electrical Specifications, TA = +25ºC, -Vdc = Vee = -3.3V
Parameter
Conditions
Min. Typ. Max
Power Supply Voltage
±5% Tolerance
-3.46 -3.3 -3.13
Power Supply Current
210 240
Maximum Data Rate
NRZ Format
50
Maximum Clock Frequency
25
Minimum Clock Frequency
0.001
Clock Input Duty Cycle
Data Output Duty Cycle [1]
Deterministic Jitter [2]
Additive Random Jitter [3]
@ 25 GHz
@ 50 Gbps
45 55
45 55
1.5
0.2
Clock Phase Margin
Relative to data period @ 45 Gbps
270
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Units
V
mA
Gbps
GHz
GHz
%
%
ps p-p
ps rms
degree

1 page




HMC-C061 pdf
v01.0109
www.datashAeebt4su.ocolmute Maximum Ratings
Power Supply Voltage (Vee)
-3.6 to +0.5V
Input Signals
-1.5V to +0.5V
Output Signals
Junction Temperature
Storage Temperature
Operating Temperature
-1.5V to +0.5V
125°C
-65°C to +125°C
-40°C to 70°C
Outline Drawing
HMC-C061
50 Gbps, DOUBLE-EDGE TRIGGERED
D-TYPE FLIP-FLOP MODULE
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
6
6 - 14
NOTES:
1 PACKAGE, LEADS, COVER MATERIAL: KOVAR
2 FINISH: GOLD PLATE OVER NICKEL PLATE.
3 ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
4 TOLERANCES:
4.1 .XX = ± .02
4.2 XXX = ±.010
5 MARK LOT NUMBER ON 0.080 X 0.250 LABEL WHERE
SHOWN, WITH 0.030” MIN. TEXT HEIGHT.
Package Information
Package Type
C-13
Package Weight [1]
59.5 gms
[1] Includes the connectors
[2] ±1 gms Tolerance
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet HMC-C061.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
HMC-C060D-Type Flip-Flop ModulHittite Microwave Corporation
Hittite Microwave Corporation
HMC-C061Double Edge Triggered D-Type Flip-Flop ModuleHittite Microwave Corporation
Hittite Microwave Corporation
HMC-C0621:2 Fanout Buffer ModuleHittite Microwave Corporation
Hittite Microwave Corporation
HMC-C064XOR / XNOR ModuleHittite Microwave Corporation
Hittite Microwave Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar