|
|
Número de pieza | MB95FV100A-101 | |
Descripción | 8-bit Proprietary Microcontrollers | |
Fabricantes | Fujitsu Media Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MB95FV100A-101 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-12602-1E
8-bit Proprietary Microcontrollers
CMOS
F2MC-8FX MB95110A Series
www.DataSheet4U.com
MB95116A/F118AS/F118AW/FV100A-101
■ DESCRIPTION
The MB95110A series is general-purpose, single-chip microcontrollers. In addition to a compact instruction set,
the microcontrollers contain a variety of peripheral functions.
■ FEATURES
• F2MC-8FX CPU core
Instruction set that is optimum to the controllers
• Multiplication and division instructions
• 16-bit arithmetic operation
• Bit test branch instruction
• Bit manipulation instructions etc.
• Clock
• Main clock
• Main PLL clock
• Subclock (for dual clock product)
• Sub PLL clock (for dual clock product)
■ PACKAGES
48-pin plastic BCC
48-pin plastic-LQFP
(Continued)
(LCC-48P-M09)
(FPT-48P-M26)
1 page MB95110A Series
■ SELECT OF OSCILLATION STABILIZATION WAIT TIME (MASK PRODUCT ONLY)
For the MASK product, you can set the mask option when ordering MASK ROM to select the initial value of main
clock oscillation stabilization wait time from among the following four values.
Note that the EVA and FLASH products are fixed their initial value of main clock oscillation stabilization wait time
at the maximum value.
Selection of oscillation stabilization wait time
(22 − 2) /FCH
www.DataSheet4U.com
(212 − 2) /FCH
(213 − 2) /FCH
(214 − 2) /FCH
Remarks
0.5 µs (at main oscillation clock 4 MHz)
Approx. 1.02 ms (at main oscillation clock 4 MHz)
Approx. 2.05 ms (at main oscillation clock 4 MHz)
Approx. 4.10 ms (at main oscillation clock 4 MHz)
■ PACKAGES AND CORRESPONDING PRODUCTS
Part number
Package
LCC-48P-M09
FPT-48P-M26
BGA-224P-M08
: Available
: Unavailable
MB95116A
MB95F118AS
MB95F118AW MB95FV100A-101
5
5 Page MB95110A Series
■ I/O CIRCUIT TYPE
Type
Circuit
X1 (X1A)
A X0 (X0A)
www.DataSheet4U.com
Standby control
BR
B’
C
Standby control
External
interrupt enable
Pch
Nch
R
G
Standby control
Pull-up control
Pch
Nch
Remarks
• Oscillation circuit
• High-speed side
Feedback resistance value : approx. 1 MΩ
• Low-speed side
Feedback resistance : approx. 24 MΩ
(EVA product : approx. 10 MΩ)
Dumping resistance : approx. 144 kΩ
(EVA product : without dumping resistance)
• Only for input
• Hysteresis input only for MASK product
• With pull-down resistor only for MASK
product
• Hysteresis input only for MASK product
• CMOS output
• Hysteresis input
• CMOS output
• CMOS input
• Hysteresis input
• With pull-up control
(Continued)
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet MB95FV100A-101.PDF ] |
Número de pieza | Descripción | Fabricantes |
MB95FV100A-101 | 8-bit Proprietary Microcontrollers | Fujitsu Media Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |