DataSheet.es    


PDF HTC426060G9AT00 Data sheet ( Hoja de datos )

Número de pieza HTC426060G9AT00
Descripción (HTC4260x0GxAT00) Hard Disk Drive
Fabricantes Hitachi 
Logotipo Hitachi Logotipo



Hay una vista previa y un enlace de descarga de HTC426060G9AT00 (archivo pdf) en la parte inferior de esta página.


Total 70 Páginas

No Preview Available ! HTC426060G9AT00 Hoja de datos, Descripción, Manual

OEM Manual
www.DataSheet4U.com
Hard Disk Drive Specifications
Travelstar C4K60-60/40/30/20
REV.1
Models:
HTC426060G9AT00
HTC426040G9AT00
HTC426030G7AT00
HTC426020G7AT00
Caution for Safety
Read Safety descriptions carefully.
Read and recommend drive usage cautions to your end user.
Keep this manual with care.
(Total 146 pages)
HITACHI
©2004, Hitachi Global Storage Technologies. All rights reserved.
K6610168
Rev.1
Nov 19, 2004
-1-

1 page




HTC426060G9AT00 pdf
Safety Instructions
Caution
1. The product is not authorized for use in life support devices or systems or other applications that pose a
significant risk of personal injury.
2. Since the drive uses glass media for the disk platter, opening of Metal Head Disk Assembly (HDA) may
cause bodily injury. Warranty void in case of opened HDA or any broken HDA seals. Don’t open the HDA
or break any HDA seals.
3. Dropping of the HDD may cause bodily injury. Handle with care.
4. Do not hit the interface connector pins against other objects. Do not make contact with the interface
connector pins. Contact causes pin dent, electrical discharge distraction or contact failure. Also, pins or
www.DataSheet4U.HcoDmA corners may cause bodily injury. Handle with care.
Caution
5. Observe Clause 3.3 “Drive Usage Condition Specifications”. Since reliability and product life depends on
usage conditions, please consult our sales or application engineers.
6. Keep usage conditions within specifications (Power Supply, Environment, etc.). If the conditions are not
kept within the specifications, failures may occur.
7. Hot swapping (Power-on swapping) can damage the drive. The drive shall be swapped during Power Off
only.
8. Electro Static Discharge (ESD) can damage the drive. Protect the drive from ESD during handling.
9. Voltage rise time 5 - 100 ms at power on is required for power supply. The power supply voltage must not
be under –0.3V at power off.
10. This product is required over current protection for possible combustion due to circuit or component
failure. Secondary over current protection shall be prepared by the system. The requirement of the
current limitation is max. 10 A for the protection.
11. Improper insertion of connector or wrong jumper setting may cause catastrophic failures. Referring to this
manual prior to the connector insertion or jumper setting can help to insure correct insertion.
12. If a foreign conductive substance (metallic powder, fluid, etc.) adheres to active metal of the drive
(Printed pattern, component lead, etc. on PCBA), it may cause catastrophic failures. Customer should
protect the drive from the above condition.
13. The PCBA side of the drive should be covered with insulation sheet if the active metal of host system
may contact to the PCBA of the drive. If the insulation sheet is not provided for the possible contact of the
live metal, failures may occur.
14. Shock can result in permanent damage to the drive and/or loss of data. Prevent shocks, which is often
incurred by dropping, knocking over, or hitting the drive.
15. To fix the drive, use the size of screws and the torque recommended in this manual. If non-recommended
size screws and torque are used, it may cause catastrophic failures.
16. Do not press top cover. It may cause catastrophic failures. In case of steel plate installation on HDD
cover side, the spacing between HDD cover and steel plate should be kept more than 2 mm. If this
spacing is not kept for the steel plate, it may affect Load/Unload mechanism.
17. Do not push the bottom PCBA of the drive. It may cause catastrophic failures.
K6610168
Rev.1
Nov 19, 2004
-5-

5 Page





HTC426060G9AT00 arduino
1.0 General
1.1. Introduction
The Travelstar C4K60-60/40/30/20 disk drives reach high capacities in a 1.8 type form factor by applying
the latest high-density recording technology.
Capacity
Product name
Model name
(Formatted)
Height
Interface
Travelstar C4K60-60 HTC426060G9AT00 60.011 GB
9.5 mm
ATA-6(IDE)
Travelstar C4K60-40 HTC426040G9AT00 40.007 GB
9.5 mm
ATA-6(IDE)
Travelstar C4K60-30 HTC426030G7AT00 30.005 GB
7.0 mm
ATA-6(IDE)
Travelstar C4K60-20 HTC426020G7AT00 20.003 GB
7.0 mm
ATA-6(IDE)
www.DataSheet4U.com
[Features]
- GMR Head
- ID-less Format
- ME2PRML Read Channel
- Data Transfer Rate
(Host-Device)
-16.6 MB/sec: PIO mode-4/Multiword DMA mode-2
- 100 MB/sec: Ultra DMA mode-5
(Device-Buffer)
- 18.4 to 34.0 MB/s(60/30GB), 15.9 to 29.7 MB/sec(40/20GB)
- CDR (Constant Density Recording)
- On-the-fly ECC Correction
- Buffer: 2MB
- Read-ahead Cache/Write Cache
- Auto Read Reassign/Auto Write Reassign
- SMART
- Average Access Time 15 ms
- Embedded Sector Servo
- FDB(Fluid Dynamics Bearing) Motor
- Rotary Actuator
- Load/Unload Mechanism
- 62grams(60/40GB), 47 grams(30/20GB)
- Low Power Consumption: 0.25W at Idle mode, 0.08W at Standby mode (3.3V operation)
- Advanced Power Management(APM)
- Non-operating Shock: 11,760m/S2(1200G, 1ms, half-sine wave)
- Operating Shock: 4,900m/S2(500G, 2ms, half-sine wave)
[Identify Device Information for Setup]
Table 1.1 Identify Device information (Addressing)
Product name
Word 1
Word 3
Word 6
Word 60 – 61 *1
Number of CYL. Number of HD Number of SPT Word 100 - 103
Total LBA
HTC426060G9AT00
16383 *2
16
63 117,210,240
HTC426040G9AT00
16383 *2
16
63 78,140,160
HTC426030G7AT00
16383 *2
16
63 58,605,120
HTC426020G7AT00
16383 *2
16
63 39,070,080
*1 : Words 60-61 reflect the total number of user addressable sectors in LBA mode.
*2 : Maximum capacity in CHS mode is 8,455MB.
K6610168
Rev.1
Nov 19, 2004
- 11 -

11 Page







PáginasTotal 70 Páginas
PDF Descargar[ Datasheet HTC426060G9AT00.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
HTC426060G9AT00(HTC4260x0GxAT00) Hard Disk DriveHitachi
Hitachi

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar