DataSheet.es    


PDF BTA416Y Data sheet ( Hoja de datos )

Número de pieza BTA416Y
Descripción Three-quadrant triacs
Fabricantes NXP Semiconductors 
Logotipo NXP Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de BTA416Y (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! BTA416Y Hoja de datos, Descripción, Manual

BTA416Y series B and C
16 A Three-quadrant triacs, insulated, high commutation, high
temperature
Rev. 01 — 3 October 2007
Product data sheet
1. Product profile
www.DataSheet4U.com
1.1 General description
Passivated, new generation, high commutation triacs in an internally insulated TO-220
plastic package.
1.2 Features
I Very high commutation performance
I Isolated mounting base
I High operating junction temperature
I High immunity to dV/dt
I 2500 V RMS isolation voltage
1.3 Applications
I Heating and cooking appliances
I High power motor control e.g. vacuum
cleaners
I Solid-state relays
I Non-linear rectifier-fed motor loads
I Electronic thermostats for heating and
cooling loads
1.4 Quick reference data
I VDRM 600 V (BTA416Y-600B and C)
I VDRM 800 V (BTA416Y-800B and C)
I ITSM 160 A (t = 20 ms)
I IGT 50 mA (BTA416Y series B)
I IGT 35 mA (BTA416Y series C)
I IT(RMS) 16 A
2. Pinning information
Table 1.
Pin
1
2
3
mb
Pinning
Description
main terminal 1 (T1)
main terminal 2 (T2)
gate (G)
mounting base; isolated
Simplified outline
mb
Symbol
T2
sym051
T1
G
123
SOT78D (TO-220)

1 page




BTA416Y pdf
NXP Semiconductors
BTA416Y series B and C
16 A 3-quadrant triacs, insulated, high commutation, high temperature
5. Thermal characteristics
Table 4. Thermal characteristics
Symbol
Parameter
Conditions
Rth(j-mb)
thermal resistance from junction to full cycle; see Figure 6
mounting base
Rth(j-a)
thermal resistance from junction to in free air
ambient
www.DataSheet4U.com
10
Zth(j-mb)
(K/W)
1
Min Typ Max Unit
- - 1.9 K/W
- 60 - K/W
003aab821
101
102
P
103
105
104
103
102
101
tp t
1 10
tp (s)
Fig 6. Transient thermal impedance from junction to mounting base as a function of pulse duration
6. Isolation characteristics
Table 5. Isolation limiting values and characteristics
Th = 25 °C unless otherwise specified.
Symbol Parameter
Conditions
Min Typ Max Unit
Visol(RMS) RMS isolation voltage from all three terminals to
-
-
2 500
V
external heatsink; f = 50 Hz to
60 Hz; sinusoidal waveform;
RH 65 %; clean and dust free
Cisol isolation capacitance from pin 2 to external heatsink; -
f = 1 MHz
10 -
pF
BTA416Y_SER_B_C_1
Product data sheet
Rev. 01 — 3 October 2007
© NXP B.V. 2007. All rights reserved.
5 of 12

5 Page





BTA416Y arduino
NXP Semiconductors
BTA416Y series B and C
16 A 3-quadrant triacs, insulated, high commutation, high temperature
11. Legal information
11.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
www.DataSheet4U.com
Production
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
11.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
11.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a NXP Semiconductors product can reasonably be expected to
result in personal injury, death or severe property or environmental damage.
NXP Semiconductors accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or applications and therefore
such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
11.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
12. Contact information
For additional information, please visit: http://www.nxp.com
For sales office addresses, send an email to: [email protected]
BTA416Y_SER_B_C_1
Product data sheet
Rev. 01 — 3 October 2007
© NXP B.V. 2007. All rights reserved.
11 of 12

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet BTA416Y.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
BTA41600B40A standard TRIACsST Microelectronics
ST Microelectronics
BTA416YThree-quadrant triacsNXP Semiconductors
NXP Semiconductors
BTA416Y-600B3Q Hi-Com TriacNXP Semiconductors
NXP Semiconductors
BTA416Y-600C3Q Hi-Com TriacNXP Semiconductors
NXP Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar