|
|
PDF DS9098P Data sheet ( Hoja de datos )
| Número de pieza | DS9098P | |
| Descripción | iButton Retainer | |
| Fabricantes | Dallas Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DS9098P (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
DS9098P
iButton Retainer
www.dalsemi.com
FEATURES
19.30
3-D View
Compact receptacle for F5 iButton mounting
Fully backward-compatible to DS9098
Contacts are stainless steel with selective tin-
lead plating for optimal solderability to
printed circuit board
Retainer to iButton connection is stainless
steel to stainless steel
39° 39°
Withstands up to 250°C for surface mounting
Double redundancy of contacts (2 plus 2)
Contact force exceeds 200 grams for reliable
Top View
Latch
8.12
connection
Prevents reversed insertion
14.35
2.60
At insertion, the iButton is latched for reten-
tion
13.00
17.60
The iButton pops up for removal when latch
is released
∅16.50
Gentle deflection of latches allows removal of
the iButton
>25 insertion/withdrawal cycles with no per-
formance degradation
∅19.50
4.40
3.40
Bottom View
Side View
Recommended Printed Circuit Layout Pads
Compatible with standard pick and place
Data Trace
equipment
Cleaning fluids drain freely for quick clean up
ORDERING INFORMATION
Copper cladding
≥ 0.3 kg/m2
or ≥ 34 µm
(≥ 1oz/sq.ft)
8.5 Ø18.3
Ø13.7
DS9098P-TRL
Tape & Reel, 220 parts per
13 inch reel
with soldermask
overlay
Ø10.8
Center – Data
Outer Ring – Ground
All dimensions are in millimeters.
DESCRIPTION
The DS9098P iButton Retainer is a low-cost, surface-mount device to secure an F5 iButton on a printed
circuit board. It consists of three metal pieces (two for GROUND, one for DATA) molded into a body of
black, heat-stabilized, 30% glass fiber reinforced Nylon 46.
When inserting an iButton into the DS9098P, closely align axis of the iButton and the retainer. The
retainer then latches the flange of the iButton. At removal, limit deflection of retainer latches to just free
the iButton edge from retained state. Avoid applying excess force to latches.
The DS9098P is only available on tape & reel. The tape specifications match those of 68-lead PLCC
devices except for the deeper pockets and tape-feed sprockets on either side of the 44 mm tape. Align-
ment pedestals keep the part oriented on tape with the latches adjacent to the sprockets.
1 of 1
092200
1 page | ||
| Páginas | Total 1 Páginas | |
| PDF Descargar | [ Datasheet DS9098P.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DS9098P | iButton Retainer | Dallas Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |