|
|
PDF LTD104KA1S Data sheet ( Hoja de datos )
| Número de pieza | LTD104KA1S | |
| Descripción | TFT LCD Module | |
| Fabricantes | Toshiba | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LTD104KA1S (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
Toshiba Matsushita Display Technology
PRODUCT INFORMATION
26.4cm COLOUR TFT-LCD MODULE
(10.4 TYPE)
LTD104KA1S
(p-Si TFT)
FEATURES
(1) 10.4 XGA display size
(2) LVDS interface with 6bit color data
(3) Light weight(195g Typical) and Thinner design(6.8mm Max.)
(4) Digitizer easy insertion design
(5) Mechanical Compatible with LTM10C321K/T Series
TENTATIVE
MECHANICAL SPECIFICATIONS
Item
Dimensional Outline (typ.)
Number of Pixels
Active Area
Pixel Pitch
Weight (approximately)
Backlight
Specifications
238.6(W) x 173.2(H) x 6.8max(D) mm
1024(W) x 768(H) pixels
210.432(W) x 157.824(H) mm
0.2055(W) x 0.2055(H)
195g
CCFL, Sidelight type
ABSOLUTE MAXIMUM RATINGS
Item
Supply Voltage (VDD)
(VFL)
FL Driving Frequency (fFL)
Input Signal Voltage (VIN)
Operating Ambient Temperature
Storage Temperature
Storage Humidity
Min. Max. Unit
-0.3 4.0
V
0 2.0 kV(rms)
- 100 kHz
-0.3 VDD+0.3
0 50
-20 60
V
°C
°C
10 90 %RH
ELECTRICAL SPECIFICATION
Item Min. Typ.
Supply Voltage
FL Start Voltage (Ta=0°C)
(VDD)
(VFL)
3.0
495
1450
3.3
550
---
Differntial Input High Threshould (VTH)
--- ---
Differntial Input Low Threshould (VTL)
VOS-0.1
---
Current Consumption
*1 (IDD)
--- 180
*3 (IFL)
3.0 5.0
*2 *3 Power Consumption
--- 3.34
*2 : 8 color bars pattern
*3 : Excepting the efficiency FL inverter
Max.
3.6
605
1600
VOS+0.1
---
300
6.0
---
Unit
V
V(rms)
V(rms)
V
V
mA
mA(rms)
W
Remarks
IFL=5.0mA(rms)
@170 cd/m2
OPTICAL SPECIFICATION (Ta=25°C)
Item Min. Typ. Max. Unit Remarks
Contrast Ratio (CR)
100 250
---
---
Viewing Angle (Upper+Lower)
---
50
--- deg.
(CR>=10)
(Left+Right)
---
90
--- deg.
Luminance
---
170
---
cd/m2
IFL=5.0mA(rms)
*The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
Toshiba Matsushita Display technology Co.,Ltd or other rights of the third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of Toshiba Matsushita Display technology Co.,Ltd or others.
*The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba Matsushita Display
technology Co.,Ltd before proceeding with the design of equipment incorporating this product.
(1/11)
2006-10-05 (Ver.1.1)
1 page  
TIMING CHART
(1) Vertical Timing
NCLK
DE
R7-R0
G7-G0
B7-B0
t1
t2
t4 t4 t3
X,1 X,2 X,3 X,4
X,Y
X,766 X,767 X,768
(2) Horizontal Timing
t7
NCLK
DE
R7-R0
G7-G0
B7-B0
1,Y2,Y 3,Y4,Y
t4
t5
Xn,Y
(3) Vertical / Horizontal Sync Timing
VSYNC
HSYNC
DE
tvsu
tvｆp
ta
767 768
tvw
tvhd
t6
1023,Y
1024,Y
tvbp
th
tb
12
HSYNC
DE
thw
thfp
th
twde
Pixel Data
12345
thbp
1024
NCLK
LTD104KA1S
(5/11)
2006-10-05 (Ver.1.1)
5 Page 
! FOR SAFETY
LTD104KA1S
LCD module is generally designed with precise parts to achieve light weighted thin mechanical dimensions.
In using our Modules, make certain that you fully understand and put into practice the warnings and safety precautions detailed
in Engineering Information No.EE-N001,"CAUTIONS AND INSTRUCTIONS FOR TOSHIBA MATSUSHITA DISPLAY
TECHNOLOGY CO.,LTD LCD MODULES".
Refer to individual specifications and TECHNICAL DATA sheets (hereinafter called "TD") for more detailed technical
information.
1) SPECIAL PURPOSES
A) Toshiba Matsushita Display technology Co.,Ltd's Standard LCD Modules have not been customized for operation in
extreme environments or for use in applications where performance failures could be life-threatening or otherwise
catastrophic.
B) Since Toshiba Matsushita Display technology Co.,Ltd's Standard LCD Modules have not been designed for operation in
extreme environments, they must never be used in devices that will be exposed to abnormally high levels of vibration or shock
which exceed Toshiba Matsushita Display technology Co.,Ltd's published specification limits.
C) In addition, since Toshiba Matsushita Display technology Co.,Ltd Standard LCD Modules have not been designed for use in
applications where performance failures could be life-threatening or catastrophic, they must never be installed in aircraft
navigation control systems (such as, but not limited to Traffic Collision Avoidance System and Air Traffic Indicator), in military
defense or weapons systems, in critical industrial process-control systems (e.g., those involved in the production of nuclear
energy), or in critical medical device or patient life-support systems.
2) DISASSEMBLING OR MODIFICATION
DO NOT DISASSEMBLE OR MODIFY the module. It may damage sensitive parts inside LCD module, and may cause
scratches or dust on the display.
Toshiba Matsushita Display technology Co.,Ltd doses not warrant the module, if customer disassembled or modified it.
3) BREAKAGE OF LCD PANEL
DO NOT INGEST liquid crystal material, DO NOT INHALE this material, and DO NOT CONTACT the material with skin, if LCD
panel is broken and liquid crystal material spills out.
If liquid crystal material comes into mouth or eyes, rinse mouth or eyes out with water immediately.
If this material contact with skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
4) GLASS OF LCD PANEL
BE CAREFUL WITH CHIPS OF GLASS that may cause injuring fingers or skin, when the glass is broken.
5) ELECTRIC SHOCK
DISCONNECT POWER SUPPLY before handling LCD module.
DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's connector or cables in order to prevent electric
shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on.
6) ABSOLUTE MAXIMUM RATINGS AND POWER PROTECTION CIRCUIT
DO NOT EXCEED the absolute maximum rating values under the worst probable conditions caused by the supply voltage
variation, input voltage variation, variation in parts' constants, environmental temperature, etc., otherwise LCD module may be
damaged.
Employ protection circuit for power supply, whenever the specification or TD specifies it.
Suitable protection circuit should be applied for each system design.
7) DISPOSAL
When dispose LCD module, obey to the applicable environmental regulations.
(11/11)
2006-10-05 (Ver.1.1)
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet LTD104KA1S.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LTD104KA1S | TFT LCD Module | Toshiba |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |