|
|
PDF PS9113 Data sheet ( Hoja de datos )
| Número de pieza | PS9113 | |
| Descripción | INTELLIGENT POWER MODULE 5-PIN SOP PHOTOCOUPLER | |
| Fabricantes | NEC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PS9113 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
DATA SHEET
PHOTOCOUPLER
PS9113
1 Mbps, OPEN COLLECTOR OUTPUT
HIGH CMR, INTELLIGENT POWER MODULE
5-PIN SOP PHOTOCOUPLER
−NEPOC Series−
DESCRIPTION
The PS9113 is an optically coupled isolator containing a GaAlAs LED on the input side and a photo diode and a
signal processing circuit on the output side on one chip.
The PS9113 is specified high CMR, high CTR and pulse width distortion with operating temperature. It is suitable
for IPM drive.
FEATURES
• High instantaneous common mode rejection voltage (CMH, CML = ±15 kV/µs MIN.)
• Small package (5-pin SOP)
• High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.)
• Maximum propagation delays (tPLH − tPHL = 270 ns TYP.)
• Pulse width distortion ( tPHL − tPLH = 270 ns TYP.)
• Ordering number of taping product: PS9113-F3, F4: 2 500 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: File No. E72422
• DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008902 (Option)
PIN CONNECTION
(Top View)
543
12
1. Anode
2. Cathode
3. GND
4. VO
5. VCC
APPLICATIONS
• IPM Driver
• General purpose inverter
The information in this document is subject to change without notice. Before using this document, please confirm that
this is the latest version.
Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices
representative for availability and additional information.
Document No. PN10265EJ02V0DS (2nd edition)
Date Published February 2005 CP(K)
Printed in Japan
The mark shows major revised points.
© NEC Compound Semiconductor Devices, Ltd. 2003, 2005
1 page  
PS9113
ELECTRICAL CHARACTERISTICS (TA = −40 to +100°C, VCC = 15 V, unless otherwise specified)
Parameter
Symbol
Conditions
Diode Forward Voltage
VF IF = 10 mA
Reverse Current
IR VR = 3 V
Terminal Capacitance
Ct V = 0 V, f = 1 MHz, TA = 25°C
Detector Low Level Output Voltage
VOL IF = 10 mA, IOL = 2.4 mA
High Level Output Current
IOH VCC = VO = 30 V, VF = 0.8 V
High Level Supply Current
ICCH VCC = 30 V, VF = 0.8 V, VO = open
Low Level Supply Current
ICCL VCC = 30 V, IF = 10 mA, VO = open
Coupled Threshold Input Current
(H → L)
IFHL VO = 0.8 V, IO = 0.75 mA
Current Transfer Ratio (IC/IF) CTR IF = 10 mA, VO = 0.6 V
Isolation Resistance
RI-O VI-O = 1 kVDC, RH = 40 to 60%,
TA = 25°C
Isolation Capacitance
CI-O V = 0 V, f = 1 MHz, TA = 25°C
Propagation Delay Time
(H → L)*2
tPHL IF = 10 mA, RL = 20 kΩ, CL = 100 pF,
VTHHL = 1.5 V, VTHLH = 2.0 V
Propagation Delay Time
(L → H)*2
tPLH
Maximum Propagation
Delays
tPLH−tPHL
Pulse Width Distortion
(PWD)*2
tPHL-tPLH
Common Mode
Transient Immunity at High
Level Output*3
CMH
TA = 25°C, IF = 0 mA, VO > 3.0 V,
VCM = 1.5 kV, RL = 20 kΩ,
CL = 100 pF
Common Mode
Transient Immunity at Low
Level Output*3
CML
TA = 25°C, IF = 10 mA, VO < 1.0 V,
VCM = 1.5 kV, RL = 20 kΩ,
CL = 100 pF
MIN.
1.3
TYP.*1
1.65
30
0.13
0.01
0.6
0.6
1.5
MAX.
2.1
200
0.6
50
1.3
1.3
5.0
44
1011
110
0.6
250 500
520 750
−200
270
650
270 650
15
15
Unit
V
µA
pF
V
µA
mA
mA
mA
%
Ω
pF
ns
kV/µs
kV/µs
Data Sheet PN10265EJ02V0DS
5
5 Page 
PS9113
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
180˚C
120˚C
120±30 s
(preheating)
(heating)
to 10 s
to 60 s
260˚C MAX.
220˚C
Time (s)
(2) Wave soldering
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature)
• Time (each pins)
• Flux
350°C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100°C
Data Sheet PN10265EJ02V0DS
11
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet PS9113.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PS9113 | INTELLIGENT POWER MODULE 5-PIN SOP PHOTOCOUPLER | NEC |
| PS9114 | 5-PIN SOP PHOTOCOUPLER |  CEL |
| PS9115 | 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER | NEC |
| PS9117 | 10Mbps OPEN COLLECTOR OUTPUT TYPE 5-PIN SOP OPTOCOUPLER | CEL |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |