|
|
PDF MC13211 Data sheet ( Hoja de datos )
| Número de pieza | MC13211 | |
| Descripción | 2.4 GHz Low Power Transceiver | |
| Fabricantes | Freescale Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MC13211 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Freescale Semiconductor
Technical Data
Document Number: MC1321x
Rev. 1.2 05/2007
MC1321x
MC13211/212/213
ZigBee™- Compliant Platform -
2.4 GHz Low Power Transceiver
for the IEEE® 802.15.4 Standard
plus Microcontroller
Package Information
Case 1664-01
71-pin LGA [9x9 mm]
Ordering Information
Device
Device Marking
MC132111
MC132121
MC132131
13211
13212
13213
1 See Table 1 for more details.
Package
LGA
LGA
LGA
1 Introduction
Thewww.DataSheet4U.com MC1321x family is Freescale’s second-generation
ZigBee platform which incorporates a low power 2.4
GHz radio frequency transceiver and an 8-bit
microcontroller into a single 9x9x1 mm 71-pin LGA
package. The MC1321x solution can be used for wireless
applications from simple proprietary point-to-point
connectivity to a complete ZigBee mesh network. The
combination of the radio and a microcontroller in a small
footprint package allows for a cost-effective solution.
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 MC1321x Pin Assignment and Connections 8
3 MC1321x Serial Peripheral Interface (SPI) . 14
4 802.15.4 Standard Modem . . . . . . . . . . . . . . 16
5 MCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6 System Electrical Specification . . . . . . . . . 45
7 Application Considerations . . . . . . . . . . . . . 62
8 Mechanical Diagrams . . . . . . . . . . . . . . . . . . 67
The MC1321x contains an RF transceiver which is an
802.15.4 Standard compliant radio that operates in the
2.4 GHz ISM frequency band. The transceiver includes a
low noise amplifier, 1mW nominal output power, PA
with internal voltage controlled oscillator (VCO),
integrated transmit/receive switch, on-board power
supply regulation, and full spread-spectrum encoding
and decoding.
The MC1321x also contains a microcontroller based on
the HCS08 Family of Microcontroller Units (MCU),
specifically the HCS08 Version A, and can provide up to
60KB of flash memory and 4KB of RAM. The onboard
Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its
products.
© Freescale Semiconductor, Inc., 2005, 2006, 2007. All rights reserved.
1 page  
1.4 RF Modem Features
• Fully compliant 802.15.4 Standard transceiver supports 250 kbps O-QPSK data in 5.0 MHz
channels and full spread-spectrum encode and decode
• Operates on one of 16 selectable channels in the 2.4 GHz ISM band
• -1 dBm to 0 dBm nominal output power, programmable from -27 dBm to +3 dBm typical
• Receive sensitivity of <-92 dBm (typical) at 1% PER, 20-byte packet, much better than the
802.15.4 Standard of -85 dBm
• Integrated transmit/receive switch
• Dual PA ouput pairs which can be programmed for full differential single-port or dual-port
operation that supports an external LNA and/or PA.
• Three low power modes for increased battery life
• Programmable frequency clock output for use by MCU
• Onboard trim capability for 16 MHz crystal reference oscillator eliminates need for external
variable capacitors and allows for automated production frequency calibration
• Four internal timer comparators available to supplement MCU timer resources
• Supports both packet data mode and streaming data mode
• Seven GPIO to supplement MCU GPIO
1.5 Software Features
Freescale provides a wide range of software functionality to complement the MC1321x hardware. There
are three levels of application solutions:
1. Simple proprietary wireless connectivity.
2. User networks built on the 802.15.4 MAC standard.
3. ZigBee 2006 compliant, Freescale BeeStack.
1.5.1 Simple MAC (SMAC)
• Small memory footprint (about 3 Kbytes typical)
• Supports point-to-point and star network configurations
• Proprietary networks
• Source code and application examples provided
1.5.2 802.15.4 Standard-Compliant MAC
• Supports star, mesh and cluster tree topologies
• Supports beaconed networks
• Supports GTS for low latency
• Multiple power saving modes (idle doze, hibernate)
Freescale Semiconductor
MC13211/212/213 Technical Data, Rev. 1.2
5
5 Page 
Pin #
Pin Name
37 NC
38 PAO_P
39 PAO_M
40 SM
41 GPIO41
42 GPIO3
43 GPIO2
44 GPIO1
45 VDD
46 ATTN2
47 PTD2/TPM1CH2
48 PTD4/TPM2CH1
49 PTD5/TPM2CH2
50 PTD6/TPM2CH3
51 PTD7/TPM2CH4
52 PTB0/AD1P0
53 PTB1/AD1P1
54 PTB2/AD1P2
55 PTB3/AD1P3
Table 2. Pin Function Description (continued)
Type
Description
Functionality
RF Output
RF Output
Input
Digital Input/
Output
Digital
Input/Output
Test Point
Test Point
Power Input
Digital Input
Digital
Input/Output
Digital
Input/Output
Digital
Input/Output
Digital
Input/Output
Digital
Input/Output
Input/Output
Input/Output
Input/Output
Input/Output
Not used
May be grounded or left open
Modem power amplifier
RF output positive
Open drain. Connect to VDDA through a bias
network when used with external balun. Not used
when internal T/R switch is used.
Modem power amplifier
RF output negative
Open drain. Connect to VDDA through a bias
network when used with external balun. Not used
when internal T/R switch is used.
Test Mode pin
Must be grounded for normal operation
General Purpose
Input/Output 4.
See Footnote 1
Modem General Purpose
Input/Output 3
MCU Port E Bit 6 / Modem Internally connected pins. When gpio_alt_en,
General Purpose
Register 9, Bit 7 = 1, GPIO2 functions as a “CRC
Input/Output 2
Valid” indicator.
MCU Port E Bit 7 / Modem Internally connected pins. When gpio_alt_en,
General Purpose
Register 9, Bit 7 = 1, GPIO1 functions as an “Out of
Input/Output 1
Idle” indicator.
MCU main power supply Decouple to ground.
Active Low Attention.
Transitions IC from either
Hibernate or Doze Modes
to Idle.
See Footnote 2
MCU Port D Bit 2 / TPM1
Channel 2
MCU Port D Bit 4 / TPM2
Channel 1
MCU Port D Bit 5 / TPM2
Channel 2
MCU Port D Bit 6 / TPM2
Channel 3
MCU Port D Bit 7 / TPM2
Channel 4
MCU Port B Bit 0 / ATD
analogChannel 0
MCU Port B Bit 1 / ATD
analog Channel 1
MCU Port B Bit 2 / ATD
analog Channel 2
MCU Port B Bit 3 / ATD
analog Channel 3
Freescale Semiconductor
MC13211/212/213 Technical Data, Rev. 1.2
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet MC13211.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MC13211 | 2.4 GHz Low Power Transceiver | Freescale Semiconductor |
| MC13212 | 2.4 GHz Low Power Transceiver | Freescale Semiconductor |
| MC13213 | 2.4 GHz Low Power Transceiver | Freescale Semiconductor |
| MC1321x | 2.4 GHz Low Power Transceiver | Freescale Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |