|
|
Número de pieza | CS42448 | |
Descripción | Surround-sound Codecs | |
Fabricantes | Cirrus Logic | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CS42448 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! CS42448
108 dB, 192 kHz 6-In, 8-Out CODEC
FEATURES
GENERAL DESCRIPTION
Six 24-bit A/D, Eight 24-bit D/A Converters
ADC Dynamic Range
– 105 dB Differential
– 102 dB Single-Ended
DAC Dynamic Range
– 108 dB Differential
– 105 dB Single-Ended
ADC/DAC THD+N
– -98 dB Differential
– -95 dB Single-Ended
Compatible with Industry-Standard Time
Division Multiplexed (TDM) Serial Interface
System Sampling Rates up to 192 kHz
Programmable ADC High-Pass Filter for DC
Offset Calibration
www.DataSheet4U.com
Logarithmic Digital Volume Control
I²C® & SPI™ Host Control Port
Supports Logic Levels Between 5 V and 1.8 V
Popguard® Technology
The CS42448 CODEC provides six multi-bit analog-to-
digital and eight multi-bit digital-to-analog delta-sigma
converters. The CODEC is capable of operation with ei-
ther differential or single-ended inputs and outputs, in a
64-pin LQFP package.
Six fully differential, or single-ended, inputs are avail-
able on stereo ADC1, ADC2, and ADC3. When
operating in Single-ended Mode, an internal MUX be-
fore ADC3 allows selection from up to four single-ended
inputs. Digital volume control is provided for each ADC
channel, with selectable overflow detection.
All eight DAC channels provide digital volume control
and can operate with differential or single-ended
outputs.
An auxiliary serial input is available for an additional two
channels of PCM data.
The CS42448 is available in a 64-pin LQFP package in
Commercial (-10° to +70°) and Automotive (-40° to
+105°) grades. The CDB42448 Customer Demonstra-
tion board is also available for device evaluation and
implementation suggestions. Please refer to “Ordering
Information” on page 64 for complete ordering
information.
The CS42448 is ideal for audio systems requiring wide
dynamic range, negligible distortion and low noise, such
as A/V receivers, DVD receivers, and automotive audio
systems.
Control Port & Serial
Audio Port Supply =
1.8 V to 5 V
Digital Supply =
3.3 V to 5 V
Analog Supply =
3.3 V to 5 V
I2C/SPI
Software Mode
Control Data
Interrupt
Reset
Register
Configuration
ADC Overflow
& Clock Error
Interrupt
Internal Voltage
Reference
External
Mute Control
Mute
Control
Serial Audio
Input
Auxilliary Serial
Audio Input
Input Master
Clock
Serial Audio
Output
http://www.cirrus.com
Volume
Controls
Digital
Filters
ΔΣ
Modulators
Multibit
DAC1-4 and
8
Differential or
Single-Ended
Analog Filters
Outputs
8
High Pass
Filter
High Pass
Filter
Digital
Filters
Digital
Filters
Multibit
Oversampling
ADC1&2
Multibit
Oversampling
ADC3
4
4
2
2
*Optional MUX allows selection from up to 4 single-ended inputs.
Copyright © Cirrus Logic, Inc. 2006
(All Rights Reserved)
Differential or
Single-Ended
Analog Inputs
NOVEMBER '06
DS648F2
1 page CS42448
Figure 36.DSM Stopband Rejection .......................................................................................................... 57
Figure 37.DSM Transition Band ................................................................................................................ 57
Figure 38.DSM Transition Band (Detail) ................................................................................................... 58
Figure 39.DSM Passband Ripple .............................................................................................................. 58
Figure 40.QSM Stopband Rejection ......................................................................................................... 58
Figure 41.QSM Transition Band ................................................................................................................ 58
Figure 42.QSM Transition Band (Detail) ................................................................................................... 58
Figure 43.QSM Passband Ripple .............................................................................................................. 58
Figure 44.SSM Stopband Rejection .......................................................................................................... 59
Figure 45.SSM Transition Band ................................................................................................................ 59
Figure 46.SSM Transition Band (detail) .................................................................................................... 59
Figure 47.SSM Passband Ripple .............................................................................................................. 59
Figure 48.DSM Stopband Rejection .......................................................................................................... 59
Figure 49.DSM Transition Band ................................................................................................................ 59
Figure 50.DSM Transition Band (detail) .................................................................................................... 60
Figure 51.DSM Passband Ripple .............................................................................................................. 60
Figure 52.QSM Stopband Rejection ......................................................................................................... 60
Figure 53.QSM Transition Band ................................................................................................................ 60
Figure 54.QSM Transition Band (detail) .................................................................................................... 60
Figure 55.QSM Passband Ripple .............................................................................................................. 60
LIST OF TABLES
www.DataSheet4U.com
Table 1. I/O Power Rails ............................................................................................................................. 8
Table 2. Single-Speed Mode Common Frequencies ................................................................................ 30
Table 3. Double-Speed Mode Common Frequencies ............................................................................... 30
Table 4. Quad-Speed Mode Common Frequencies ................................................................................. 30
Table 5. I²S, LJ, RJ Clock Ratios .............................................................................................................. 31
Table 6. OLM#1 Clock Ratios ................................................................................................................... 31
Table 7. OLM#2 Clock Ratios ................................................................................................................... 31
Table 8. TDM Clock Ratios ....................................................................................................................... 31
Table 9. Serial Audio Interface Channel Allocations ................................................................................. 34
Table 10. MCLK Frequency Settings for I²S, Left and Right Justified Interface Formats .......................... 43
Table 12. DAC Digital Interface Formats .................................................................................................. 44
Table 11. MCLK Frequency Settings for TDM & OLM Interface Formats ................................................. 44
Table 13. ADC Digital Interface Formats .................................................................................................. 45
Table 14. Example AOUT Volume Settings .............................................................................................. 49
Table 15. Example AIN Volume Settings .................................................................................................. 50
DS648F2
5
5 Page CS42448
ANALOG INPUT CHARACTERISTICS (COMMERCIAL)
(Test Conditions (unless otherwise specified): TA = -10 to +70°C; VD = VLS = VLC = 3.3 V±5%, VA = 5 V±5%;
Full-scale input sine wave: 1 kHz through the active input filter in Figure 26 on page 53 and Figure 27 on page 53;
Measurement Bandwidth is 10 Hz to 20 kHz.)
Parameter
Fs=48 kHz, 96 kHz, 192 kHz
Dynamic Range
A-weighted
unweighted
40 kHz bandwidth unweighted
Total Harmonic Distortion + Noise
(Note 5)
40 kHz bandwidth
-1 dB
-20 dB
-60 dB
-1 dB
ADC1-3 Interchannel Isolation
ADC3 MUX Interchannel Isolation
DC Accuracy
Interchannel Gain Mismatch
Gain Drift
Analog Input
Full-Scale Input Voltage
Differential Input Impedance (Note 6)
www.DataSheet4U.com Single-Ended Input Impedance (Note 7)
Common Mode Rejection Ratio (CMRR)
Differential
Min Typ Max
99 105
96 102
- 99
-
-
-
- -98 -92
- -82 -
- -42 -
- -90 -
- 90 -
- 90 -
- 0.1 -
- ±100 -
1.06*VA 1.12*VA 1.18*VA
18 -
-
---
- 82 -
Single-Ended
Min Typ Max
96 102
93 99
96
-
-
-
- -95 -89
- -79 -
- -39 -
- -90 -
- 90 -
- 90 -
- 0.1 -
- ±100 -
0.53*VA 0.56*VA 0.59*VA
---
18 -
-
---
Unit
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
ppm/°C
Vpp
kΩ
kΩ
dB
DS648F2
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet CS42448.PDF ] |
Número de pieza | Descripción | Fabricantes |
CS4244 | 4 In/4 Out Audio CODEC | Cirrus Logic |
CS42448 | Surround-sound Codecs | Cirrus Logic |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |