|
|
PDF CMQ1631-QH Data sheet ( Hoja de datos )
| Número de pieza | CMQ1631-QH | |
| Descripción | QFN Plastic Packaged Power Amplifier | |
| Fabricantes | Mimix Broadband | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CMQ1631-QH (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
13 - 18 GHz
0.5W QFN Plastic Packaged Power Amplifier
March 2006 - Rev 30-Mar-06
CMQ1631-QH
Features
30 dBm Saturated Output Power Between 15.5~17.5 Ghz
21 dB (Typ) Linear Gain
Unconditionally Stable
Low Cost, Surface Mount Package
4mm x 4mm x 1.4mm
RoHS Compliant
7 V, 770 mA
Applications
Military Ku Band
VSAT
Point to Point Radio
Ku-Band Space
General Description
The CMQ1631-QH is a pHEMT power amplifier packaged in a 4X4 QFN plastic package. The CMQ1631-QH is self
contained with 50 ohm input and output matching. The CMQ1631-QH is unconditionally stable and the internal
matchingwww.DataSheet4U.com allows for a reduction in external components making this product a simple and low cost solution. RoHS
compliance and standard surface mount package make it an ideal solution in all manufacturing environments.The
power amplifier is intended for use in the extended Ku-Band satellite applications.
Electrical Characteristics
Parameter
Symbol Min Typ Max Min Typ Max Min Typ Max Units
Operating Frequency
F 13
14.5 14.5
17.5 17.5
18 GHz
Drain Current
Id 700 700 700 mA
Drain Voltage
Vd 6 7
6 7 8 6 7 8 Volts
Gate Voltage (RF ON)
Vg -2 - -0.2 -2 - -0.2 -2 - -0.2 Volts
Linear Gain
S21 20 21 21 dB
Input/Outpu VSWR
VSWR
2.0:1
2.0:1 3:1
dB
Noise Figure
NF 6 6 6 dB
Saturated Output Power
Psat 28
30
29 dBm
Power @ 1dB Compression Gain P1dB
27.5
29
28 dBm
Gate Current
Igs - 0.5 5 - 0.5 5 - 0.5 5 mA
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1 page  
13 - 18 GHz
0.5W QFN Plastic Packaged Power Amplifier
March 2006 - Rev 30-Mar-06
CMQ1631-QH
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product.This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Part Numbering Designator - For Mimix/Celeritek lead-free products, the letter “G” will be used in the part number for
Matte Tin finished RoHSCompliant components and “L” will be used in the part number of NiPdAu finished RoHS
Compliant components in the second position of the part number suffix, as shown below:
Example A: CXX1234-XX-0G00 = component bulk quantity Matte Tin finished RoHScompliant parts
Example B: CXX1234-XX-0L0T = component in tape and reel NiPdAu finished RoHS parts
For those customers not making the change at this time, Mimix/Celeritek will maintain production of current
configurations. For questions and comments e-mail: [email protected].
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet CMQ1631-QH.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CMQ1631-QH | QFN Plastic Packaged Power Amplifier | Mimix Broadband |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |