|
|
PDF CMM6001-SC Data sheet ( Hoja de datos )
| Número de pieza | CMM6001-SC | |
| Descripción | High Dynamic Range Amplifier | |
| Fabricantes | Mimix Broadband | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CMM6001-SC (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
60 MHz - 3.0 GHz
High Dynamic Range Amplifier
August 2006 - Rev 26-Aug-06
Features
60 MHz to 3.0 GHz Frequency Range
37 dBm Output IP3
2.5 dB Noise Figure
12.3 dB Gain
20.5 dBm P1dB
SOT-89 SMT Package, RoHS Compliant
Single Power Supply
+3V to +5V Voltage Rail
Description
The CMM6001-SC is a high dynamic range amplifier designed
for applications operating within the 60 MHz to 3.0 GHz
frequency range. It is an ideal solution for transmit and receive
functions where high linearity is required. The amplifier has the
flexibility of being optimized for a number of wireless
applications. The combination of low NF and high IP3 at the
same bias point make it an ideal transmit or receive solution
when used in applications including cellular and PCS (personal
communications service) operating from 0.8 to 2.2 GHz;
MMDSwww.DataSheet4U.com (multichannel multipoint distribution systems)
operating from 2.2 to 2.7 GHz; and WLAN (wireless LAN)
operating at 2.4 GHz.
The CMM6001-SC is packaged in a low-cost space efficient,
surface mount SOT-89 package which provides excellent
electrical stability and low thermal resistance. All devices are
100% RF and DC tested.
CMM6001-SC
Functional Block Diagram
Ground
4
1 23
Input Ground Output
Bias
Applications
Wireless Local Loop Transmit and Receive
UNH Transmit and Receive
Dual Band 802.11 WLAN
WiMAX
Absolute Maximum Ratings
Supply Voltage
+6.0 V
RF Input Power
+10 dBm
Storage Temperature
-55ºC to 150ºC
Junction Temperature
150ºC
Operating Temperature
-40ºC to +85ºC
Thermal Resistance
65º C/W
Operation of this device above any of these parameters may cause damage.
Electrical Characteristics
Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture.
Parameter
Condition
Min Typ Max Units
Frequency R ange
Gain Externally matched
Input Return Loss
Externally matched
Output IP3
Noise Figure
Output P1dB
Operating Current R ange
Supply V oltage
0.06 3.0 GHz
10.5 12.5
dB
-10 dB
+33 +37
dB m
2.8 dB
20.5 dB m
55 75 100 mA
5.0 V
Notes:
1. T = 25°C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1 page  
60 MHz - 3.0 GHz
High Dynamic Range Amplifier
August 2006 - Rev 26-Aug-06
CMM6001-SC
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product.This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Ordering Information
Part Number for Ordering
CMM6001-SC-0G00
CMM6001-SC-0G0T
PB-CMM6001-SC-0000
Package
Matte Tin plated RoHS compliant SOT-89 surface-mount power package in
bulk quantity
Matte Tin plated RoHS compliant SOT-89 surface-mount power package in
tape and reel
Evaluation Board with SMA connectors for CMM6001-SC
We also offer the plastic package with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager
for more information regarding different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet CMM6001-SC.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CMM6001-SC | High Dynamic Range Amplifier | Mimix Broadband |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |