DataSheet.es    


PDF CMM0014-BD Data sheet ( Hoja de datos )

Número de pieza CMM0014-BD
Descripción GaAs MMIC Power Amplifier
Fabricantes Mimix Broadband 
Logotipo Mimix Broadband Logotipo



Hay una vista previa y un enlace de descarga de CMM0014-BD (archivo pdf) en la parte inferior de esta página.


Total 3 Páginas

No Preview Available ! CMM0014-BD Hoja de datos, Descripción, Manual

2.0-22.0 GHz GaAs MMIC
Power Amplifier
August 2006 - Rev 02-Aug-06
2.0 to 22.0 GHz
GaAs MMIC
Power Amplifier
Advanced Product Information
August 2004
Chip Diagram
(1 of 3)
Features
Small Size: 45 x 92 mils
High Gain: 11.5 dB, Nom
Medium Power: +25 dBm, Typ P1dB @14 GHz
Directly Cascadable – Fully Matched
Unconditionally Stable
Single Bias Operation
Bias Control
pHEMT Technology
Silicon Nitride Passivation
CMM0014-BD
Specifications (TA = 25°C, Vdd = 8V)1
Parameters
www.DataSheet4U.com
Frequency Range
Small Signal Gain
Gain Flatness
Gain Variation (-40°C to +85°C)
Input Return Loss
Output Return Loss
Power Output (@1 dB Gain Compression) 1
P1dB Variation (over operating frequency)
P1dB Variation (-40°C to +85°C)
Saturated Output Power
Second Order Intercept Point @ 10 GHz
Third Order Intercept Point @ 10 GHz
Noise Figure
Current
Thermal Resistance
Stability 2
Units
GHz
dB
±dB
±dB
dB
dB
dBm
dBm
±dBm
dBm
dBm
dBm
dB
mA
°C/W
Min
2.0
10.0
22.5
24.0
250
Unconditionally Stable
Typ
-10.0
-9.0
48.0
37.5
295
Max
22.0
13.5
0.8
0.35
4.5
0.25
29.0
7.5
340
33.0
Notes: 1. Tested on Celeritek Connectorized evaluation board (standard assembly condition detailed on page 3).
2. Stability factor measured on-wafer.
Absolute Maximum Ratings
Parameter
Drain Voltage
Drain Current
Continuous Power Dissipation
Input Power
Storage Temperature
Channel Temperature
Operating Backside Temperature
Rating
7V (min.) / 9V (max.)
350 mA
2.8 W
+20 dBm
-50°C to +150°C
+175°C
-40 to (see note 2)°C
Notes: 1. Operation outside these limits can cause permanent damage.
2. Calculation maximum operating temperature:
Tmax = 175–(Pdis [W] x 33.0) [°C].
Die Attach and Bonding Procedures
Die Attach: Eutectic die attach is recommended. For eutec-
tic die attach: Preform: AuSn (80% Au, 20% Sn); Stage
Temperature: 290°C, ±5°C; Handling Tool: Tweezers; Time: 1
min or less.
Wire Bonding: Wire Size: 0.7 to 1.0 mil in diameter (pre-
stressed); Thermocompression bonding is preferred over
thermosonic bonding. For thermocompression bonding:
Stage Temperature: 250°C; Bond Tip Temperature: 150°C;
Bonding Tip Pressure: 18 to 40 gms depending on size of
wire.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 3
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.

1 page





PáginasTotal 3 Páginas
PDF Descargar[ Datasheet CMM0014-BD.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
CMM0014-BDGaAs MMIC Power AmplifierMimix Broadband
Mimix Broadband

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar