|
|
Número de pieza | SLVU2.8-8 | |
Descripción | ULTRA LOW CAPACITANCE TVS ARRAY | |
Fabricantes | Protek Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SLVU2.8-8 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! SLVU2.8-8
ULTRA LOW CAPACITANCE TVS ARRAY
APPLICATIONS
✔ Ethernet - 10/100/1000 Base T
✔ Cellular Phones
✔ Audio/Video Inputs
✔ Handheld Electronics
✔ Personal Digital Assistant (PDA)
IEC COMPATIBILITY (EN61000-4)
✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
✔ 61000-4-4 (EFT): 40A - 5/50ns
✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Ground) & Level 3(Line-Line)
SO-8
FEATURES
✔ 600 Watts Peak Pulse Power per Line (tp = 8/20µs)
✔ Provides Protection For Four Line Pairs
✔ ESD Protection > 40 kilovolts
✔ Low Leakage Current < 1.0µA
✔ Ultra Low Capacitance: 6pF Typical
✔ RoHS Compliant
MECHANICAL CHARACTERISTICS
✔ Molded JEDEC SO-8
✔ Weight 70 milligrams (Approximate)
✔ Available in Lead-Free Pure-Tin Plating(Annealed)
✔ Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
✔ Consult Factory for Leaded Device Availability
✔ Flammability Rating UL 94V-0
✔ 12mm Tape and Reel Per EIA Standard 481
✔ Marking: Marking Code, Logo, Date Code & Pin One Defined By Dot on Top of Package
PIN CONFIGURATION
8765
05181.R3 3/07
1234
1
www.protekdevices.com
1 page SO-8 PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
-A-
SLVU2.8-8
SO-8
85
-B - P + 0.010 (0.25 MM) M B M
4 PL
14
D
G C R x 45°
-T-
K
+ 0.010 (0.25 MM) M T B S A S
8 PL
J
MOUNTING PAD
0.050 ± 0.005
0.030 ± 0.005
F
0° - 10°
0.160 ± 0.005
0.245 MIN
DIM
A
B
C
D
F
G
J
K
P
R
NOTES
PACKAGE DIMENSIONS
MILLIMETERS
MIN MAX
INCHES
MIN MAX
4.80
3.80
1.35
0.35
0.40
1.27 BSC
0.18
0.10
5.80
0.25
5.00
4.00
1.75
0.49
1.250
1.27 BSC
0.25
0.25
6.20
0.50
0.189
0.150
0.054
0.014
0.016
0.05 BSC
0.007
0.004
0.229
0.010
0.196
0.157
0.068
0.019
0.049
0.05 BSC
0.009
0.008
0.244
0.019
1. - T - = Seating Plane and Datum Surface.
2. Dimensions “A” and “B” are Datum.
3. Dimensions “A” and “B” do not include mold protrusion.
4. Maximum mold protrusion is 0.015” (0.380 mm) per side.
5. Dimensioning and tolerances per ANSI Y14.5M, 1982.
6. Dimensions are exclusive of mold flash and metal burrs.
TAPE & REEL/BULK ORDERING NOMENCLATURE
1. Surface mount product is taped and reeled in accordance with EIA-481.
2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e. SLVU2.8-8-T7.
3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape,
i.e., SLVU2.8-8-T13.
4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., SLVU2.8-8-LF-T7.
5. No Suffix = Product Shipped in Tubes of 98 pcs per Tube.
0.045 ± 0.005
Outline & Dimensions: Rev 1 - 11/01, 06009
COPYRIGHT © ProTek Devices 2007
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC).
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is
the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such
products.
05181.R3 3/07
5
ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: 602-431-8101 Fax: 602-431-2288
E-Mail: [email protected]
Web Site: www.protekdevices.com
www.protekdevices.com
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet SLVU2.8-8.PDF ] |
Número de pieza | Descripción | Fabricantes |
SLVU2.8-4 | Small Power TVS | WillSEMI |
SLVU2.8-4 | EPD TVS Diodes Array For ESD and Latch-Up Protection | Semtech Corporation |
SLVU2.8-8 | ULTRA LOW CAPACITANCE TVS ARRAY | Protek Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |