|
|
Número de pieza | SY58037U | |
Descripción | ULTRA PRECISION 8:1 MUX | |
Fabricantes | Micrel Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SY58037U (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! Micrel
ULTRA PRECISION 8:1 MUX
WITH INTERNAL TERMINATION AND
1:2 CML FANOUT BUFFER
Precision Edge™
Precision ESdYg5e8™037U
SY58037U
FEATURES
s Selects between 1 of 8 inputs, and provides two
precision, low skew CML output copies
Precision Edge™
s Guaranteed AC performance over temperature and
voltage:
DESCRIPTION
• DC to 5Gbps throughput
• <450ps propagation delay IN-to-Q (VIN ≥ 300mV)
• <70ps tr / tf time
• <15ps skew (output-to-output)
s Unique, patent-pending, channel-to-channel
isolation design provides superior crosstalk
performance
s Ultra-low jitter design:
• <1psrms random jitter
• <10pspp deterministic jitter
• <10pspp total jitter (clock)
• <0.7psrms crosstalk-induced jitter
s Unique, patent-pending, input termination and VT
The SY58037U is a low jitter, low skew, high-speed 8:1
multiplexer with a 1:2 differential fanout buffer optimized for
precision telecom and enterprise server distribution
applications. The SY58037U distributes clock frequencies
from DC to 4GHz and data rates to 5Gpbs guaranteed over
temperature and voltage.
The SY58037U differential input includes Micrel’s unique,
3-pin input termination architecture that directly interfaces
to any differential signal (AC- or DC-coupled) as small as
100mV (200mVpp) without any level shifting or termination
resistor networks in the signal path. The outputs are 50Ω
source-terminated CML with extremely fast rise/fall time
guaranteed to be less than 70ps.
pin accepts DC- and AC-coupled inputs (CML, PECL,
LVDS)
s 400mV CML output swing
The SY58037U features a patent-pending isolation design
that significantly improves channel-to-channel crosstalk
performance.
s 50Ω source terminated outputs minimize round-trwiwpw.DataSheet4U.cTomhe SY58037U operates from a 2.5V ±5% or 3.3V ±10%
reflections
supply and is guaranteed over the full industrial temperature
s Power supply 2.5V ±5% or 3.3V ±10%
s –40°C to +85°C temperature range
s Available in 44-pin (7mm × 7mm) MLF™ package
range of –40°C to +85°C. The SY58037U is part of Micrel’s
high-speed, Precision Edge™ product line.
Data sheets and support documentation can be found on
Micrel’s web site at www.micrel.com.
APPLICATIONS
s Data communication systems
s All SONET/SDH data/clock applications
s All Fibre Channel applications
s All Gigabit Ethernet applications
Precision Edge is a trademark of Micrel, Inc.
MLF and MicroLeadFrame are trademarks of Amkor Technology, Inc.
M9999-070804
[email protected] or (408) 955-1690
1
Rev.: A Amendment: /0
Issue Date: July 2004
1 page Micrel
Precision Edge™
SY58037U
CML OUTPUT DC ELECTRICAL CHARACTERISTICS(7)
VCC = 2.5V ±5% or 3.3V ±10%; TA= –40°C to +85°C; RL = 100Ω across each output pair, unless otherwise stated.
Symbol
Parameter
Condition
Min Typ
VOH Output HIGH Voltage
Q, /Q
VCC–0.040 VCC–0.010
VOUT
Output Differential Swing
Q, /Q
See Figure 1a.
325 400
VDIFF_OUT
Differential Output Voltage Swing
Q, /Q
See Figure 1b.
650 800
ROUT
Output Source Impedance
40 50
Max
VCC
60
Units
V
mV
mV
Ω
LVTTL/CMOS DC ELECTRICAL CHARACTERISTICS(7)
VCC = 2.5V ±5% or 3.3V ±10%; TA= –40°C to +85°C, unless otherwise stated.
Symbol
Parameter
Condition
Min Typ
VIH Input HIGH Voltage
VIL Input LOW Voltage
IIH Input HIGH Current
IIL Input LOW Current
2.0
–125
–300
Note:
7. The circuit is designed to meet the DC specifications shown in the above table after thermal equilibrium has been established.
Max
VCC
0.8
30
Units
V
V
µA
µA
5
5 Page Micrel
44 LEAD MicroLeadFrame™ (MLF-44)
Precision Edge™
SY58037U
Package
EP- Exposed Pad
Die
CompSide Island
Heat Dissipation
Heat Dissipation
Heavy Copper Plane
Heavy Copper Plane
VEE
VEE
PCB Thermal Consideration for 44-Pin MLF™ Package
(Always solder, or equivalent, the exposed pad to the PCB)
Package Notes:
1. Package meets Level 2 qualification.
2. All parts are dry-packaged before shipment.
3. Exposed pads must be soldered to a ground for proper thermal management.
MICREL, INC. 1849 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com
The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use.
Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into
the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s
use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify
Micrel for any damages resulting from such use or sale.
© 2004 Micrel, Incorporated.
11
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet SY58037U.PDF ] |
Número de pieza | Descripción | Fabricantes |
SY58037U | ULTRA PRECISION 8:1 MUX | Micrel Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |