|
|
Número de pieza | SY10EP16V | |
Descripción | High-speed Differential Receiver | |
Fabricantes | Micrel Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SY10EP16V (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! Micrel
5V/3.3V HIGH-SPEED
DIFFERENTIAL RECEIVER
ECLSEYPC1r0LoEP™Pr1o6™V
SY10EP16V
FINAL
FEATURES
s 3.3V and 5V power supply options
s Bandwidth –3dB >2.5GHz
s Internal 75kΩ input pulldown resistor
s Faster version of SY10EL16V
s 10K ECL compatible I/O
s Improved output waveform characteristics
s Available in 8-pin (3mm) MSOP and SOIC packages
PIN CONFIGURATION/BLOCK DIAGRAM
ECL Pro™
DESCRIPTION
The SY10EP16V is a high-speed differential receiver.
The device is functionally equivalent to the EL16V
devices, with higher performance capabilities. With output
transition times significantly faster than the EL16V, the
SY10EP16V is ideally suited for interfacing with high-
frequency sources.
The SY10EP16V provides a VBB output for either
single-ended use or as a DC bias for AC coupling to the
device. The VBB pin should be used only as a bias for
the SY10EP16V as its current sink/source capability is
limited. Whenever used, the VBB pin should be bypassed
to ground via a 0.01µF capacitor.
Under open input conditions (pulled to VEE), internal
input clamps will force the Q output LOW.
NC 1
D2
/D 3
8 VCC
7Q
6 /Q
www.DataSheet4U.com
PIN NAMES
VBB 4
5 VEE
Available in 8-Pin SOIC and MSOP Packages
Pin
D, /D
Q, /Q
VBB
VCC
VEE
Function
ECL Data Inputs
ECL Data Outputs
Reference Voltage Output
Positive Power Supply
Negative Power Supply
ECL Pro is a trademark of Micrel, Inc.
1
Rev.: C Amendment: /0
Issue Date: March 2003
1 page Micrel
8 LEAD PLASTIC SOIC (Z8-1)
ECL Pro™
SY10EP16V
Rev. 03
MICREL, INC. 1849 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL + 1 (408) 944-0800 FAX + 1 (408) 944-0970 WEB http://www.micrel.com
The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use.
Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into
the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s
use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify
Micrel for any damages resulting from such use or sale.
© 2003 Micrel, Incorporated.
5
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet SY10EP16V.PDF ] |
Número de pieza | Descripción | Fabricantes |
SY10EP16U | 2.5/3.3V Precision ECL Differential Receiver/Driver | Micrel Semiconductor |
SY10EP16V | High-speed Differential Receiver | Micrel Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |