|
|
PDF PS7206-1A Data sheet ( Hoja de datos )
| Número de pieza | PS7206-1A | |
| Descripción | Optical Coupled MOS FET | |
| Fabricantes | CEL | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PS7206-1A (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Solid State Relay
OCMOS FET
PS7206-1A
4-PIN SOP, 0.6 Ω LOW ON-STATE RESISTANCE
600 mA CONTINUOUS LOAD CURRENT
1-ch Optical Coupled MOS FET
DESCRIPTION
The PS7206-1A is a low on-state resistance solid state relay containing GaAs LEDs on the light emitting side (input
side) and MOS FETs on the output side.
It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance.
FEATURES
• Low on-state resistance (Ron = 0.6 Ω TYP.)
• Large continuous load current (IL = 600 mA)
• 1 channel type (1 a output)
• Designed for AC/DC switching line changer
• Small and thin package (4-pin SOP, Height = 2.1 mm)
• High isolation voltage (BV = 1 500 Vr.m.s.)
• Low offset voltage
• Ordering number of taping product: PS7206-1A-E3, E4, F3, F4
APPLICATIONS
• Measurement equipment
• FA equipment
Document No. PN10297EJ01V0DS (1st edition)
(Previous No. P14496EJ5V0DS00)
Date Published February 2003 CP(K)
The mark shows major revised points.
1 page  
PS7206-1A
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
100
MAXIMUM LOAD CURRENT vs.
AMBIENT TEMPERATURE
900
80
600
60
40
300
20
0
–25 0
25 50 75 85 100
Ambient Temperature TA (˚C)
FORWARD VOLTAGE vs.
AMBIENT TEMPERATURE
1.8
IF = 50 mA
1.6 30 mA
20 mA
10 mA
1.4 5 mA
1 mA
1.2
1.0
0
–25 0
25 50 75 85 100
Ambient Temperature TA (˚C)
OUTPUT CAPACITANCE vs.
APPLIED VOLTAGE
200
f = 1 MHz
150
100
50
0.8
–25
0 25 50 75
Ambient Temperature TA (˚C)
100
OFF-STATE LEAKAGE CURRENT vs.
AMBIENT TEMPERATURE
10–6
VD = 60 V
10–7
10–8
10–9
10–10
10–11
0
20 40 60
Ambient Temperature TA (˚C)
80
0 20 40 60 80 100 120
Applied Voltage VD (V)
LOAD CURRENT vs. LOAD VOLTAGE
IF = 10 mA,
IL = 600 mA
900
600
300
–0.8 –0.4
0 0.4
–300
–600
–900
Load Voltage VL (V)
0.8
Data Sheet PN10297EJ01V0DS
5
5 Page 
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Lead (Pb)
Mercury
Cadmium
Hexavalent Chromium
PBB
PBDE
Concentration Limit per RoHS
(values are not yet fixed)
< 1000 PPM
< 1000 PPM
< 100 PPM
< 1000 PPM
< 1000 PPM
< 1000 PPM
Concentration contained
in CEL devices
-A
Not Detected
-AZ
(*)
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet PS7206-1A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PS7206-1A | 4-PIN SOP / 0.6 W LOW ON-STATE RESISTANCE 600 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET |  NEC |
| PS7206-1A | Optical Coupled MOS FET | CEL |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |