|
|
PDF PS7141L-2B Data sheet ( Hoja de datos )
| Número de pieza | PS7141L-2B | |
| Descripción | (PS7141x-xB) Optical Coupled MOS FET | |
| Fabricantes | CEL | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PS7141L-2B (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Solid State Relay
OCMOS FET
PS7141-1B,-2B,PS7141L-1B,-2B
6, 8-PIN DIP, 400 V BREAK DOWN VOLTAGE, NORMALLY CLOSE TYPE
1-ch, 2-ch Optical Coupled MOS FET
DESCRIPTION
The PS7141-1B, -2B and PS7141L-1B, -2B are solid state relays containing GaAs LEDs on the light emitting side
(input side) and normally close (N.C.) contact MOS FETs on the output side.
They are suitable for analog signal control because of their low offset and high linearity.
The PS7141L-1B, -2B have a surface mount type lead.
FEATURES
• 1 channel type (1 b output) or 2 channel type (1 b + 1 b output)
• Low LED operating current (IF = 2 mA)
• Designed for AC/DC switching line changer
• Small package (6, 8-pin DIP)
• Low offset voltage
• PS7141L-1B, -2B: Surface mount type
• UL approved: File No. E72422 (S) (PS7141-1B, PS7141L-1B only)
• BSI approved: No. 8245/8246
• CSA approved: No. CA 101391
APPLICATIONS
• Exchange equipment
• Measurement equipment
• FA/OA equipment
Document No. PN10279EJ01V1DS (1st edition)
(Previous No. P12814EJ5V0DS00)
The mark shows major revised points.
1 page  
PS7141-1B,-2B,PS7141L-1B,-2B
RECOMMENDED OPERATING CONDITIONS (TA = 25 °C)
Parameter
LED Operating Current
LED Off Voltage
Symbol
IF
VF
MIN.
2
0
TYP.
10
MAX.
20
0.5
Unit
mA
V
ELECTRICAL CHARACTERISTICS (TA = 25 °C)
Parameter
Diode
Forward Voltage
Reverse Current
MOS FET Off-state Leakage
Current
Output Capacitance
Coupled LED Off-state Current
On-state Resistance
Turn-on Time *1
Turn-off Time *1
Isolation Resistance
Isolation Capacitance
Conditions
Symbol PS7141-1B,
PS7141-2B,
PS7141L-1B
PS7141L-2B
VF IF = 10 mA
IR VR = 5 V
ILoff IF = 10 mA, VD = 400 V
Cout VD = 0 V, f = 1 MHz, IF = 10 mA
IFoff IL = 150 mA
Ron1 IF = 0 mA, IL = 10 mA
Ron2 IF = 0 mA, IL = 150 mA, t ≤ 10 ms
ton IF = 10 mA,
IF = 10 mA,
VO = 5 V,
VO = 5 V,
toff RL = 1.5 kΩ,
RL = 500 Ω,
PW ≥ 10 ms
PW ≥ 10 ms
RI-O VI-O = 1.0 kVDC
CI-O V = 0 V, f = 1 MHz
*1 Test Circuit for Switching Time
Pulse Input
IF
VL Input
MIN. TYP. MAX. Unit
1.2 1.4
5.0
0.03 1.0
V
µA
µA
185
20
16
0.02
pF/ch
2.0 mA
30 Ω
25
0.2 ms
0.2 1.0
109
1.1
Ω
pF/ch
50 %
0
Input monitor
Rin
VO monitor
VO = 5 V
Output
RL
toff
90 %
10 %
ton
Data Sheet PN10279EJ01V1DS
5
5 Page 
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Lead (Pb)
Mercury
Cadmium
Hexavalent Chromium
PBB
PBDE
Concentration Limit per RoHS
(values are not yet fixed)
< 1000 PPM
< 1000 PPM
< 100 PPM
< 1000 PPM
< 1000 PPM
< 1000 PPM
Concentration contained
in CEL devices
-A
Not Detected
-AZ
(*)
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet PS7141L-2B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PS7141L-2A | Optical Coupled MOS FET | CEL |
| PS7141L-2A | 2-ch Optical Coupled MOS FET |  Renesas |
| PS7141L-2B | (PS7141x-xB) Optical Coupled MOS FET | CEL |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |