|
|
Número de pieza | TC74AC166P | |
Descripción | TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC | |
Fabricantes | Toshiba Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TC74AC166P (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! www.DataSheet4U.com
TC74AC166P/F/FN
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74AC166P,TC74AC166F,TC74AC166FN
8-Bit Shift Register (P-IN, S-OUT)
The TC74AC166 is an advanced high speed CMOS 8-BIT
PARALLEL/SERIAL-IN, SERIAL-OUT SHIFT REGISTER
fabricated with silicon gate and double-layer metal wiring
C2MOS technology.
It achieves the high speed operation similar to equivalent
Bipolar Schottky TTL while maintaining the CMOS low power
dissipation.
It consists of parallel-in or serial-in, serial-out 8-bit shift
register with a gated clock input and an overriding clear input.
The parallel-in or serial-in modes are controlled by the
SHIFT/ LOAD input. When the SHIFT/ LOAD input is held
high, the serial data input is enabled and the eight flip-flops
perform serial shifting on each clock pulse. When held low, the
parallel data inputs are enabled and synchronous loading occurs
on the next clock pulse. Clocking is accomplished on the
low-to-high transition of the clock pulse. The CLOCK-INHIBIT
input should be shifted high only while the CLOCK input is held
high. A direct clear input overrides all other inputs, including the
clock, and sets all the flip-flops to zero. Functional details are
shown in the truth table and the timing charts.
All inputs are equipped with protection circuits against static
discharge or transient excess voltage.
Features
• High speed: fmax = 170 MHz (typ.) at VCC = 5 V
• Low power dissipation: ICC = 8 µA (max) at Ta = 25°C
• High noise immunity: VNIH = VNIL = 28% VCC (min)
• Symmetrical output impedance: |IOH| = IOL = 24 mA (min)
Capability of driving 50 Ω
transmission lines.
• Balanced propagation delays: tpLH ∼− tpHL
• Wide operating voltage range: VCC (opr) = 2 to 5.5 V
• Pin and function compatible with 74HC166
Pin Assignment
Note: xxxFN (JEDEC SOP) is not available in
Japan.
TC74AC166P
TC74AC166F
TC74AC166FN
Weight
DIP16-P-300-2.54A
SOP16-P-300-1.27A
SOP16-P-300-1.27
SOL16-P-150-1.27
: 1.00 g (typ.)
: 0.18 g (typ.)
: 0.18 g (typ.)
: 0.13 g (typ.)
1 2006-06-01
1 page Recommended Operating Conditions (Note)
TC74AC166P/F/FN
Characteristics
Symbol
Rating
Unit
Supply voltage
Input voltage
Output voltage
Operating temperature
Input rise and fall time
VCC
VIN
VOUT
Topr
dt/dV
2.0 to 5.5
0 to VCC
0 to VCC
−40 to 85
0 to 100 (VCC = 3.3 ± 0.3 V)
0 to 20 (VCC = 5 ± 0.5 V)
V
V
V
°C
ns/V
Note: The recommended operating conditions are required to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Electrical Characteristics
DC Characteristics
Characteristics
High-level input
voltage
Low-level input
voltage
High-level output
voltage
Low-level output
voltage
Input leakage
current
Quiescent supply
current
Symbol
VIH
VIL
VOH
VOL
IIN
Test Condition
VCC
(V)
2.0
⎯ 3.0
5.5
2.0
⎯ 3.0
5.5
2.0
IOH = −50 µA
VIN
= VIH or
VIL IOH = −4 mA
IOH = −24 mA
IOH = −75 mA
(Note)
3.0
4.5
3.0
4.5
5.5
2.0
IOL = 50 µA
VIN
= VIH or
VIL IOL = 12 mA
IOL = 24 mA
IOL = 75 mA
3.0
4.5
3.0
4.5
(Note) 5.5
Ta = 25°C
Min Typ. Max
1.50 ⎯
⎯
2.10 ⎯
⎯
3.85 ⎯
⎯
⎯ ⎯ 0.50
⎯ ⎯ 0.90
⎯ ⎯ 1.65
1.9 2.0 ⎯
2.9 3.0 ⎯
4.4 4.5 ⎯
2.58 ⎯
⎯
3.94 ⎯
⎯
⎯⎯⎯
⎯ 0.0 0.1
⎯ 0.0 0.1
⎯ 0.0 0.1
⎯ ⎯ 0.36
⎯ ⎯ 0.36
⎯⎯⎯
VIN = VCC or GND
5.5 ⎯
⎯ ±0.1
ICC VIN = VCC or GND
5.5 ⎯ ⎯ 8.0
Note:
This spec indicates the capability of driving 50 Ω transmission lines.
One output should be tested at a time for a 10 ms maximum duration.
Ta = −40 to
85°C
Min Max
1.50
2.10
3.85
⎯
⎯
⎯
1.9
2.9
4.4
2.48
3.80
3.85
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
0.50
0.90
1.65
⎯
⎯
⎯
⎯
⎯
⎯
0.1
0.1
0.1
0.44
0.44
1.65
⎯ ±1.0
⎯ 80.0
Unit
V
V
V
V
µA
µA
5 2006-06-01
5 Page Note: Lead (Pb)-Free Packages
DIP16-P-300-2.54A SOP16-P-300-1.27A SOL16-P-150-1.27
TC74AC166P/F/FN
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice. 021023_D
060116EBA
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc. 021023_A
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk. 021023_B
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations. 060106_Q
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others. 021023_C
• The products described in this document are subject to the foreign exchange and foreign trade laws. 021023_E
11 2006-06-01
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet TC74AC166P.PDF ] |
Número de pieza | Descripción | Fabricantes |
TC74AC166F | TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC | Toshiba Semiconductor |
TC74AC166FN | TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC | Toshiba Semiconductor |
TC74AC166P | TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC | Toshiba Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |