DataSheet.es    


PDF LMP7711 Data sheet ( Hoja de datos )

Número de pieza LMP7711
Descripción CMOS Input Amplifier
Fabricantes National Semiconductor 
Logotipo National Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de LMP7711 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! LMP7711 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
PRELIMINARY
September 2005
LMP7711
Precision, 17 MHz, Low Noise, CMOS Input Amplifier
General Description
The LMP7711 is a low noise, low offset, CMOS input, rail-
to-rail output precision amplifier with a high gain bandwidth
and an enable pin. The LMP7711 is part of the LMP
precision amplifier family and is ideal for a variety of instru-
mentation applications.
Utilizing a CMOS input stage, the LMP7711 achieves an
input bias current of 100 fA, input referred voltage noise of
5.8 nV/
, and an input offset voltage of less than
±150 µV. These features make the LMP7711 a superior
choice for precision applications.
Consuming only 1.15 mA of supply current, the LMP7711
offers a high gain bandwidth of 17 MHz, enabling accurate
amplification at high closed loop gains.
The LMP7711 has a supply voltage range of 1.8V to 5.5V;
which makes this an ideal choice for portable low power
applications with low supply voltage requirements. In order
to reduce the already low power consumption of the
LMP7711, an enable function is available. Once in shut-
down, the LMP7711 draws only 140 nA of supply current.
The LMP7711 is built with National’s advanced VIP50 pro-
cess technology. The LMP7711 is available in a 6-pin
TSOT23 package.
Features
Unless otherwise noted, typical values at VS = 5V.
n Input offset voltage
±150 µV (max)
n Input bias current
100 fA
n Input voltage noise
5.8 nV/
n Unity gain bandwidth
17 MHz
n Supply current
1.15 mA
n Supply voltage range
1.8V to 5.5V
n Total harmonic distortion
0.001% @1 kHz, 600
n Operating temperature range
−40oC to 125˚C
n Rail-to-rail output swing
n Space saving TSOT23 package
Applications
n Active filters and buffers
n Sensor interface applications
n Transimpedance amplifiers
Typical Performance
Offset Voltage Distribution
Input Referred Voltage Noise
20150322
LMPis a trademark of National Semiconductor Corporation.
© 2005 National Semiconductor Corporation DS201503
20150339
www.national.com

1 page




LMP7711 pdf
Physical Dimensions inches (millimeters) unless otherwise noted
6-Pin TSOT23
NS Package Number MK06A
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves
the right at any time without notice to change said circuitry and specifications.
For the most current product information visit us at www.national.com.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and whose failure to perform when
properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in a significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
BANNED SUBSTANCE COMPLIANCE
National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products
Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain
no ‘‘Banned Substances’’ as defined in CSP-9-111S2.
Leadfree products are RoHS compliant.
National Semiconductor
Americas Customer
Support Center
Tel: 1-800-272-9959
www.national.com
National Semiconductor
Europe Customer Support Center
Fax: +49 (0) 180-530 85 86
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
National Semiconductor
Asia Pacific Customer
Support Center
National Semiconductor
Japan Customer Support Center
Fax: 81-3-5639-7507
Tel: 81-3-5639-7560

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet LMP7711.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LMP7711LMP7711/712 Single/Dual Precision 17MHz Low Noise CMOS Input Amps (Rev. F)Texas Instruments
Texas Instruments
LMP7711CMOS Input AmplifierNational Semiconductor
National Semiconductor
LMP7711(LMP7711 / LMP7712) CMOS Input AmplifiersNational Semiconductor
National Semiconductor
LMP7712LMP7711/712 Single/Dual Precision 17MHz Low Noise CMOS Input Amps (Rev. F)Texas Instruments
Texas Instruments

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar