|
|
PDF LA73051 Data sheet ( Hoja de datos )
| Número de pieza | LA73051 | |
| Descripción | 3Ch Video Driver | |
| Fabricantes | Sanyo Electric | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LA73051 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Ordering number : ENA0243
LA73051
Monolithic Linear IC
3ch 75Ω Video Driver
Overview
This LA73051 is a 3ch 75Ω Video Driver IC. The LA73051 is ideal for use the video output driver such as VCR and
DVD-player equipment.
Functions
• 6dB AMP+driver (3ch)
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Maximum supply voltage
Allowable power dissipation
VCC max
Pd max
Ta ≤ 80°C *
Operating temperature
Topr
Storage temperature
Tstg
*: Mounted on a board : 114.3×76.1×1.6mm3 glass epoxy board.
Conditions
Recommended Operating Conditions at Ta = 25°C
Parameter
Symbol
Recommending operation voltage
VCC
Conditions
Operating voltage range
VCC op
Ratings
±7, +14
440
-20 to +80
-55 to +150
Unit
V
mW
°C
°C
Ratings
±5
+9
±4.0 to ±5.5
+8 to +10
Unit
V
V
www.DataSheet4U.com
22806 MS OT B8-7296,B8-5737 No.A0243-1/5
1 page  
www.DataSheet4U.com
LA73051
Continued from preceding page.
Pin No.
15
16
17
19
21
Pin Name
–VCC
Terminal Explanation
–VCC of using ±power supply. Using +power supply, it is GND.
VOUT3
VOUT2
VOUT1
Output terminal.
Using ±power supply, in case of the mode with DC offset, it is
possible to use without capacitor of output by setting pins 3, 8 to
0.3V-bias and by setting pin 6 to 0.6V-vias. And in case of the
mode without DC offset, it is possible to use without capacitor of
output by setting each input to zero-bias. When using +power
supply, both of the modes needs coupling capacitor.
Equivalent Circuit
22
+VCC
Both ±power supply and +power supply are +VCC.
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees of
the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could give
rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that
could cause damage to other property. When designing equipment, adopt safety measures so that these
kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits
and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products (including technical data, services) described or contained
herein are controlled under any of applicable local export control laws and regulations, such products must
not be exported without obtaining the export license from the authorities concerned in accordance with the
above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, of
otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for
the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no
www.DargtiaguhaStrsahnotefeteehsitrda4rpeUamr.tcaiedose.mor implied regarding its use or any infringements of intellectual property rights or other
This catalog provides information as of February, 2006. Specifications and information herein are subject
to change without notice.
PS No.A0243-5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet LA73051.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LA73050 | Monolithic Linear IC 6ch 75ohm Video Driver |  Sanyo Semicon Device |
| LA73051 | 3Ch Video Driver | Sanyo Electric |
| LA73052 | 4ch 75ohm Video Driver | Sanyo Semicon Device |
| LA73054 | Monolithic Linear IC | Sanyo Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |