|
|
PDF AXK5xxxxx Data sheet ( Hoja de datos )
| Número de pieza | AXK5xxxxx | |
| Descripción | (P5 Series) Connectors | |
| Fabricantes | Panasonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AXK5xxxxx (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
|
No Preview Available !
NARROW-PITCH
CONNECTORS FOR
BOARD-TO-BOARD
CONNECTION
AXK(5(S)/6(S))
NARROW PITCH
(0.5mm) CONNECTORS
P5 SERIES — P5K, P5KS —
• P5K
Socket
• P5KS
Header
Socket
Header
Note) The external appearance and PC board pattern
differs for the P5K and P5KS series.
FEATURES
1. The product lineup consists of
3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm,
5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm,
7.0 mm, 8.0 mm, and 9.0 mm.
Type
P5K
P5KS
Mated height
3 mm, 3.5 mm
4 mm, 4.5 mm,
5 mm, 5.5 mm,
6 mm, 6.5 mm,
7 mm, 8 mm,
9 mm
Notes
The external
appearance and
PC board pattern
differs for the P5K
and P5KS series.
2. Strong resistance to adverse
environments! Utilizes
construction
for high contact reliability.
Bellows contact
construction
V notch construction
Ni barrier construction
P5K P5KS
⅜⅜
—
⅜
Note)
—
⅜
Note)
Porosity treatment
⅜⅜
Note: P5KS will support V notch and Ni barrier from
November, 2005, and will have TOUGH
CONTACT construction.
1) Contacts are highly resistant to shock
caused by dropping and employ our
original bellows contact construction.
• What is meant by “bellows type” contact?
Rather than two broken-out surfaces, the contact is
formed by the surfaces of two rolled plates. This
helps the contact hold up better to repeated
insertions and removals, while at the same time
achieving highly reliable contact.
The roll surfaces
are in contact
with each other,
providing high
contact reliability.
Since the contact is
formed by bending
thin plate, it has a
spring-like quality.
This construction
helps make it resist-
ant to dropping and
twisting.
2) V notch construction used for excellent
resistance against foreign matters.
(P5KS: Available from Nov. 2005)
● What is V notch construction?
By using the edge for the contacting part
and increasing contact pressure per unit
area, the effectiveness in removing flux
and contaminants is increased compared
to its predecessor. This is also effective in
preventing the trapping of contaminants.
[Cross section of contacting part]
Without notch
With V notch
Socket side contact cross section
Header side contact cross section
3) Use of Ni barrier construction is
standard. Highly effective against solder
creeping.
(P5KS: Available from Nov. 2005)
● What is Ni barrier construction?
By providing an exposed nickel part on the
gold (Au) plated contact, solder creeping is
prevented despite the ultra low profile.
[Contact]
Header side contact
Ni barrier
Cu Ni Au
Socket side contact
Exposed
Ni part
Cross section of
socket side contact
4) Porosity treatment applied for
improved resistance against corrosion.
What is porosity treatment?
This treatment consists of coating the
surface with a very thin film to seal pinholes
in the gold plating. This porosity treatment
technology ensures the same contact
reliability for thin gold plating as that of thick
gold plating.
Porosity treatment film
Au plating
Pinholes
Surrounding gas
Ni plating
Base material
● Improvement in insertion/removal durability
● Improvement in resistance to corrosion
● Improvement in contact reliability for digital signals
3. Even with the low profile, the
effective mating length has been
extended to ensure that there is some
latitude in the mating.
Effective mating length
With long effective
mating lengths, even
if the connection is
not perfect, the
electrical connection
is more than enough
for normal operations.
Type
P5K
P5KS
Effective mating length
0.75 mm
1.0 mm
4. Automatic mounting
1) Suction area for suction-type
automatic mounting machines is
employed.
Suction face
P5K Header
P5K Socket
5. Compliance with RoHS’ Directive
Environmentally friendly, the connectors’
comply with Europe’s RoHS’ Directive.
Cadmium, lead, mercury, hexavalent,
chromium, PBB and PBDE are not used.
APPLICATIONS
1. Mobile phones, PHS, mobile info-
communications terminals, and other
small portable devices
2. The 160-contacts connector:
This connector is particularly suited to
the motherboard, CPU board, and other
multi-pin expansion boards on notebook
PCs and other info-communications
applications.
CPU boards and
other multi-pin
expansion boards.
www.DataSheet4U.comMother board
www.DataSheet4U.com
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
1 page  
2. P5KS
Product
name
P5KS
Mated
height
4.0 mm
4.5 mm
5.0 mm
No. of
contacts
20
24
30
40
50
60
70
80
100
120
160
20
24
30
36
40
50
60
70
80
100
120
160
20
30
34
40
50
60
70
80
100
AXK(5(S)/6(S))
Part No.
Socket
Header
Without V notch
and Ni barrier
product
(Paper reel)
(Paper reel)
(Recommendation)
Without V notch
and Ni barrier
product
(Paper reel)
(Paper reel)
(Recommendation)
AXK5S20045*
AXK5S20047YG
(From Nov. 2005)
AXK6S20445*
AXK6S20447YG
(From Nov. 2005)
AXK5S24045*
AXK5S24047YG
(From Nov. 2005)
AXK6S24445*
AXK6S24447YG
(From Nov. 2005)
AXK5S30045*
AXK5S30047YG
(From Nov. 2005)
AXK6S30445*
AXK6S30447YG
(From Nov. 2005)
AXK5S40045*
AXK5S40047YG
(From Nov. 2005)
AXK6S40445*
AXK6S40447YG
(From Nov. 2005)
AXK5S50045*
AXK5S50047YG
(From Nov. 2005)
AXK6S50445*
AXK6S50447YG
(From Nov. 2005)
AXK5S60045*
AXK5S60047YG
(From Nov. 2005)
AXK6S60445*
AXK6S60447YG
(From Nov. 2005)
AXK5S70045*
AXK5S70047YG
(From Nov. 2005)
AXK6S70445*
AXK6S70447YG
(From Nov. 2005)
AXK5S80045*
AXK5S80047YG
(From Nov. 2005)
AXK6S80445*
AXK6S80447YG
(From Nov. 2005)
AXK5S00045*
AXK5S00047YG
(From Nov. 2005)
AXK6S00445*
AXK6S00447YG
(From Nov. 2005)
AXK5SA2075*
AXK5SA2077YG
(From Nov. 2005)
AXK6SA2475*
AXK6SA2477YG
(From Nov. 2005)
AXK5SA6075*
AXK5SA6077YG
(From Nov. 2005)
AXK6SA6475*
AXK6SA6477YG
(From Nov. 2005)
AXK5S20245*
AXK5S20247YG
(From Nov. 2005)
AXK6S20445*
AXK6S20447YG
(From Nov. 2005)
AXK5S24245*
AXK5S24247YG
(From Nov. 2005)
AXK6S24445*
AXK6S24447YG
(From Nov. 2005)
AXK5S30245*
AXK5S30247YG
(From Nov. 2005)
AXK6S30445*
AXK6S30447YG
(From Nov. 2005)
AXK5S36245*
AXK5S36247YG
(From Nov. 2005)
AXK6S36445*
AXK6S36447YG
(From Nov. 2005)
AXK5S40245*
AXK5S40247YG
(From Nov. 2005)
AXK6S40445*
AXK6S40447YG
(From Nov. 2005)
AXK5S50245*
AXK5S50247YG
(From Nov. 2005)
AXK6S50445*
AXK6S50447YG
(From Nov. 2005)
AXK5S60245*
AXK5S60247YG
(From Nov. 2005)
AXK6S60445*
AXK6S60447YG
(From Nov. 2005)
AXK5S70245*
AXK5S70247YG
(From Nov. 2005)
AXK6S70445*
AXK6S70447YG
(From Nov. 2005)
AXK5S80245*
AXK5S80247YG
(From Nov. 2005)
AXK6S80445*
AXK6S80447YG
(From Nov. 2005)
AXK5S00245*
AXK5S00247YG
(From Nov. 2005)
AXK6S00445*
AXK6S00447YG
(From Nov. 2005)
AXK5SA2275*
AXK5SA2277YG
(From Nov. 2005)
AXK6SA2475*
AXK6SA2477YG
(From Nov. 2005)
AXK5SA6275*
AXK5SA6277YG
(From Nov. 2005)
AXK6SA6475*
AXK6SA6477YG
(From Nov. 2005)
AXK5S20045*
AXK5S20047YG
(From Nov. 2005)
AXK6S20545P
AXK6S20547YG
(From Nov. 2005)
AXK5S30045*
AXK5S30047YG
(From Nov. 2005)
AXK6S30545P
AXK6S30547YG
(From Nov. 2005)
AXK5S34045*
AXK5S34047YG
(From Nov. 2005)
AXK6S34545P
AXK6S34547YG
(From Nov. 2005)
AXK5S40045*
AXK5S40047YG
(From Nov. 2005)
AXK6S40545P
AXK6S40547YG
(From Nov. 2005)
AXK5S50045*
AXK5S50047YG
(From Nov. 2005)
AXK6S50545P
AXK6S50547YG
(From Nov. 2005)
AXK5S60045*
AXK5S60047YG
(From Nov. 2005)
AXK6S60545P
AXK6S60547YG
(From Nov. 2005)
AXK5S70045*
AXK5S70047YG
(From Nov. 2005)
AXK6S70545P
AXK6S70547YG
(From Nov. 2005)
AXK5S80045*
AXK5S80047YG
(From Nov. 2005)
AXK6S80545P
AXK6S80547YG
(From Nov. 2005)
AXK5S00045*
AXK5S00047YG
(From Nov. 2005)
AXK6S00545P
AXK6S00547YG
(From Nov. 2005)
Packing
Inner carton (1 reel)
Outer carton
Note 2)
“Asterisk” mark on
end of part No.;
J: 1,500 pieces
P: 1,000 pieces
“G” mark on end of
part No.;
1,500 pieces
Note 2)
“Asterisk” mark on
end of part No.;
J: 3,000 pieces
P: 2,000 pieces
“G” mark on end of
part No.;
3,000 pieces
Note 2)
“Asterisk” mark on
end of part No.;
J: 1,500 pieces
P: 1,000 pieces
Note 2)
“Asterisk” mark on
end of part No.;
J: 3,000 pieces
P: 2,000 pieces
“G” mark on end of
part No.;
Socket: 1,500 pieces
Header: 1,000 pieces
“G” mark on end of
part No.;
Socket: 3,000 pieces
Header: 2,000 pieces
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
5 Page 
AXK(5(S)/6(S))
EMBOSSED TAPE DIMENSIONS (unit:mm, Common for respective contact type, socket and header)
• Tape dimensions (Conforming to JIS C 0806-1990.
• Plastic reel dimensions (Conforming to EIAJ ET-7200B)/
However, some tapes have mounting hole pitches that do
Paper reel dimensions (Conforming to JIS C 0806-1990)
not comply with the standard.)
Tape I
Tape II
A±0.3
C
1.75
A±0.3
B
C
1.75
E
Top cover tape
44
22
F
Emboss carrier tape
DD
1.5+00.1 dia.
1.5+00.1 dia.
Dimension table (mm)
(1) Suffix: G (1 reel, 1,500 pieces or 1,000 pieces embossed tape and plastic reel package)
Type
Mated height
No. of contacts Type of taping
A
B
C
P5KS
Socket: 4.0mm, 4.5mm, 5.0mm,
5.5mm, 6.0mm, 6.5mm
Header: 4.0mm, 4.5mm, 7.0mm
Socket: 7.0mm, 8.0mm, 9.0mm
Header: 5.0mm, 5.5mm, 6.0mm,
6.5mm, 8.0mm, 9.0mm
20 to 50
60 to 70
80 to 100
120 to 160
20 to 50
60 to 70
80 to 100
130
Tape I
Tape II
Tape II
Tape II
Tape I
Tape II
Tape II
Tape II
24.0
32.0
44.0
56.0
24.0
32.0
44.0
56.0
—
28.4
40.4
52.4
—
28.4
40.4
52.4
11.5
14.2
20.2
26.2
11.5
14.2
20.2
26.2
(2) Suffix: J (1 reel, 1,500 pieces embossed tape and paper reel package)
Type
Mated height
No. of contacts Type of taping
A
P5K
Socket and header are common
3.0mm, 3.5mm
20 to 50
60 to 70
80 to 100
Tape I
Tape II
Tape II
24.0
32.0
44.0
P5KS
Socket: 4.0mm, 4.5mm, 5.0mm,
5.5mm, 6.0mm, 6.5mm
Header: 4.0mm, 4.5mm, 7.0mm
120
20 to 50
60 to 70
80 to 100
120 to 160
Tape II
Tape I
Tape II
Tape II
Tape II
56.0
24.0
32.0
44.0
56.0
B
—
28.4
40.4
52.4
—
28.4
40.4
52.4
C
11.5
14.2
20.2
26.2
11.5
14.2
20.2
26.2
(3) Suffix: P (1 reel, 1,000 pieces embossed tape and paper reel package)
Type
Mated height
P5K
Socket and header are common
3.0mm, 3.5mm
No. of contacts
20 to 50
60 to 70
80 to 100
Type of taping
Tape I
Tape II
Tape II
A
24.0
32.0
44.0
P5KS
Socket: 4.0mm, 4.5mm, 5.0mm,
5.5mm, 6.0mm, 6.5mm
Header: 4.0mm, 4.5mm, 5.0mm,
5.5mm, 7.0mm, 8.0mm
Socket: 7.0mm, 8.0mm, 9.0mm
Header: 6.0mm, 6.5mm, 9.0mm
120
20 to 50
60 to 70
80 to 100
120 to 160
20 to 50
60 to 70
80 to 100
130
Tape II
Tape I
Tape II
Tape II
Tape II
Tape I
Tape II
Tape II
Tape II
56.0
24.0
32.0
44.0
56.0
24.0
32.0
44.0
56.0
B
—
28.4
40.4
52.4
—
28.4
40.4
52.4
—
28.4
40.4
52.4
C
11.5
14.2
20.2
26.2
11.5
14.2
20.2
26.2
11.5
14.2
20.2
26.2
D
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
D
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
D
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
E
25.4±1
33.4±1
45.4±1
57.4±1
25.4±1
33.4±1
45.4±1
57.4±1
F
380 dia.
380 dia.
380 dia.
380 dia.
380 dia.
380 dia.
380 dia.
380 dia.
Quantity per reel
1,500 pcs.
1,000 pcs.
E
24.4
+2
0
32.4
+2
0
44.4
+2
0
56.4
+2
0
24.4
+2
0
32.4
+2
0
44.4
+2
0
56.4
+2
0
F
370 dia.
370 dia.
370 dia.
370 dia.
370 dia.
370 dia.
370 dia.
370 dia.
Quantity per reel
1,500 pcs.
E
24.4
+2
0
32.4
+2
0
44.4
+2
0
56.4
+2
0
24.4
+2
0
32.4
+2
0
44.4
+2
0
56.4
+2
0
24.4
+2
0
32.4
+2
0
44.4
+2
0
56.4
+2
0
F
330 dia.
330 dia.
330 dia.
330 dia.
330 dia.
330 dia.
330 dia.
330 dia.
370 dia.
370 dia.
370 dia.
370 dia.
Quantity per reel
1,000 pcs.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
11 Page | ||
| Páginas | Total 13 Páginas | |
| PDF Descargar | [ Datasheet AXK5xxxxx.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AXK5xxxxx | (P5 Series) Connectors |  NAIS |
| AXK5xxxxx | (P5 Series) Connectors | Panasonic |
| AXK5xxxxxJ | (P5 Series) Connectors | NAIS |
| AXK5xxxxxJ | Connectors | Panasonic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |