DataSheet.es    


PDF LM4830N Data sheet ( Hoja de datos )

Número de pieza LM4830N
Descripción Two-Way Audio Amplification System with Volume Control
Fabricantes National Semiconductor 
Logotipo National Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de LM4830N (archivo pdf) en la parte inferior de esta página.


Total 14 Páginas

No Preview Available ! LM4830N Hoja de datos, Descripción, Manual

January 1999
LM4830
Two-Way Audio Amplification System
with Volume Control
General Description
The LM4830 is an integrated solution for two-way audio am-
plification. It contains a bridge-connected audio power ampli-
fier capable of delivering 1W of continuous average power to
an 8load with less than 1% THD from a 5V power supply.
It also has the capability of driving 100 mW into a
single-ended 32impedance for headset operation. There
is a 30 dB attenuator in front of a bridged power amplifier
with 6 dB of gain. The attenuation is controlled through 4 bits
of parallel digital control; 15 steps of 2 dB each.
The device also contains a microphone preamp with two se-
lectable inputs. Mic2 is selected when HS is high and A1 is in
single-ended mode. Mic1 is selected when HS is low and A1
is in bridged mode. This configuration is optimum for switch-
ing between an internal system speaker and external head-
set with microphone. The device also incorporates a buffer
used for driving capacitive loads.
The LM4830 also provides a low-current consumption shut-
down mode making it optimally suited for low-power portable
systems. In addition, the device has an internal thermal shut-
down protection mechanism.
Key Specifications
n THD at 1W cont. avg PO into 8: 1% (max)
n Instantaneous peak output power: 1.4W
n Shutdown current: 0.5 µA (typ)
n Supply voltage range: 2.7V V DD 5.5V
Features
n 4-bit digital control for 30 dB of volume attenuation
n Two selectable microphone inputs
n High performance microphone preamp
n Extra buffer for driving long cables
n No bootstrap capacitors or snubber circuits are
necessary
n Small Outline (SO) packaging
n Thermal shutdown protection circuitry
Applications
n Hands-free phone systems
n Mobile phone accessories
n Desktop conference phones
n Portable computers
n Teleconference computer applications
Connection Diagram
Dual-In-Line and
Small Outline Packages
DS012677-2
Top View
Order Number LM4830M
See NS Package Number M24B for SO
Order Number LM4830N
See NS Package Number N24A for DIP
© 1999 National Semiconductor Corporation DS012677
www.national.com

1 page




LM4830N pdf
Computer Application Circuit
FIGURE 2.
DS012677-4
5 www.national.com

5 Page





LM4830N arduino
Application Information (Continued)
This feature is especially useful when the IC is used in por-
table battery operated systems where energy conservation
is imperative.
In many applications, a microcontroller or microprocessor
output interfaces to the LM4830 shutdown pin, providing a
quick, smooth transition into shutdown. Another solution is to
use a single-pole, single-throw switch in conjunction with an
external pull-up resistor. When the switch is closed, the shut-
down pin is connected to ground and enables the amplifier. If
the switch is open, the external pull-up resistor disables the
LM4830 by bringing the shutdown pin up to VDD. This
scheme guarantees that the shutdown pin will not float, pre-
venting unwanted state changes.
Additionally, when the IC comes out of shutdown the IC’s
volume attenuation setting will remain unchanged.
11 www.national.com

11 Page







PáginasTotal 14 Páginas
PDF Descargar[ Datasheet LM4830N.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LM4830Two-Way Audio Amplification System with Volume ControlNational Semiconductor
National Semiconductor
LM4830MTwo-Way Audio Amplification System with Volume ControlNational Semiconductor
National Semiconductor
LM4830NTwo-Way Audio Amplification System with Volume ControlNational Semiconductor
National Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar