|
|
PDF ALN0859 Data sheet ( Hoja de datos )
| Número de pieza | ALN0859 | |
| Descripción | Low Noise Amplifier | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ALN0859 (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
|
No Preview Available !
Features
37.5 dB Gain at 859 MHz
18 dBm P1dB
37 dBm Output IP3
0.65 dB Noise Figure
Operating at Single 5 V Supply
110 mA Current Consumption
Specifications
Description
The plerowTM ALN-series is the compactly designed sur-
face-mount module for the use of the LNA with or without
the following gain blocks in the infrastructure equipment of
the mobile wirelss (CDMA, GSM, PCS, PHS, WCDMA,
DMB, WLAN, WiBro, WiMAX), GPS, satellite communica-
tion terminals and so on. It has an exceptional performance
of low noise figure, high gain, high OIP3, and low bias cur-
rent. The stability factor is always kept less than unity over
the application band in order to confirm its unconditionally
stable implementation to the application system environ-
ment. The surface-mount module package including the
completed matching circuit and other components neces-
sary just in case allows very simple and convenient imple-
mentation onto the system board in mass production level.
Parameter
Unit
Specification
Frequency Range
Gain
Gain Flatness
Noise Figure
Output IP3
S11 / S22
Output P1dB
Supply Current
Supply Voltage
Impedance
Max. RF Input Power
@ CDMA 20FA
Package Type & Size
MHz
dB
dB
dB
dBm
dB
dBm
mA
V
Ω
dBm
mm
824 ~ 894
37.5
± 0.5
0.65
37
-14 / -14
18
110
5
50
5
SMT, 13Wx13Lx3.8H
1) Measurement conditions are as follows: T = 25°C, VCC = 5 V, Freq. = 859 MHz, 50 ohm system.
2) OIP3 is measured with two tones at an output power of +8 dBm / tone separated by 1 MHz.
3) Note: We recommend that the VSWR toward a source and load be less than 1:4 to avoid an unwanted oscillation.
PlerowTM ALN0859
Low Noise Amplifier
2-stage Single Type
More Information
Website: www.asb.co.kr
E-mail: [email protected]
Tel: (82) 42-528-7223
Fax: (82) 42-528-7222
ASB Inc., 4th Fl. Venture Town
Bldg., 367-17 Goijeong-Dong,
Seo-Gu, Daejon 302-716, Korea
Outline Drawing
plerow
ALN
ASB Inc.
TOP
BOTTOM
Pin Number
3
8
10
Others
Function
RF In
RF Out
+Vcc
Ground
SIDE
: Soldering area
: 0.4 plated thru holes to
ground plane
(Unit: mm)
1/1
SUGGESTED FOOTPRINT
www.asb.co.kr
Note: 1. The number and size of ground via holes in
a circuit board is critical for thermal RF
grounding considerations.
2. We recommend that the ground via holes be
placed on the bottom of all ground pins for
better RF and thermal performance, as
shown in the drawing at the left side.
August 2005
1 page | ||
| Páginas | Total 1 Páginas | |
| PDF Descargar | [ Datasheet ALN0859.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ALN0859 | Low Noise Amplifier | ETC |
| ALN0859 | Internally Matched LNA Module |  Advanced Semiconductor |
| ALN0859AT | Internally Matched LNA Module | Advanced Semiconductor |
| ALN0859BT | Internally Matched LNA Module | Advanced Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |