DataSheet.es    


PDF STK740-470 Data sheet ( Hoja de datos )

Número de pieza STK740-470
Descripción 5V/5A Single Output Separate Excitation Chopper Regulator
Fabricantes Sanyo Semicon Device 
Logotipo Sanyo Semicon Device Logotipo



Hay una vista previa y un enlace de descarga de STK740-470 (archivo pdf) en la parte inferior de esta página.


Total 10 Páginas

No Preview Available ! STK740-470 Hoja de datos, Descripción, Manual

Ordering number:EN*6107
Thick Film Hybrid IC
STK740-470
5V/5A Single Output Separate Excitation
Chopper Regulator
Preliminary
Overview
The STK740-470 is a separate-excitation step-down
chopper regulator hybrid IC for the secondstage circuit.
This IC incorporates in the package all the necessary
circuits for a chopper regulator including power switch,
error amplifier, soft start, shutdown type output short
protection, low-voltage malfunction prevention, on/off,
and snubber circuits. Therefore, external components
required are input and output capacitors and a choke coil
only and this allows this IC to be used to construct a
large-current (5A) chopper regulator as if a 3-pin regula-
tor were used. DC8V to 18V input voltage can be
handled and up to 5A of output current is supported.
Applications
• Local power supply for the equipment of which input
rating is DC9V to 15V.
Package Dimensions
unit:mm
4170-SIP28
[STK740-470]
46.6
41.2
3.6
(6.63)
1
2.54
12
0.5
11×2.54=27.94
Features
• Adoption of Sanyo IMST ; Insulated Metal Substrate
Technology, allows the circuit to be operated without
using a heat sink (see “No Fin Output Current Derat-
ing” chart in the page 6).
• Typical efficiency of 90% at DC 12V input, 2.5A
output.
• Fine adjustment of output voltage enable.
• 50 kHz operating frequency.
• Low-RON resistance power MOSFET adopted.
• Low-VF Schottky barrier diode adopted.
8.5
0.4
2.9
SANYO : SIP-28
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
63099RM (KT) No.6107–1/10

1 page




STK740-470 pdf
STK740-470
Sample Characteristics at Ta = 25˚C, in the test circuit
Output Voltage vs.Output Current
5.4
5.2
VIN =15V
VIN =12V
5.0 VIN=9V
4.8
4.6
0123456
Output Current Io[A]
Efficiency vs.Output Current
100
90 VIN=9V
VIN=12V
VIN=15V
80
70
60
50
01 2 3 4 5 6
Output Current Io[A]
No.6107–5/10

5 Page










PáginasTotal 10 Páginas
PDF Descargar[ Datasheet STK740-470.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
STK740-4705V/5A Single Output Separate Excitation Chopper RegulatorSanyo Semicon Device
Sanyo Semicon Device

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar