DataSheet.es    


PDF STK740-441 Data sheet ( Hoja de datos )

Número de pieza STK740-441
Descripción 3.3V/5A Single Output Separate Excitation Chopper Regulator
Fabricantes Sanyo Semicon Device 
Logotipo Sanyo Semicon Device Logotipo



Hay una vista previa y un enlace de descarga de STK740-441 (archivo pdf) en la parte inferior de esta página.


Total 10 Páginas

No Preview Available ! STK740-441 Hoja de datos, Descripción, Manual

Ordering number:EN6106
Thick Film Hybrid IC
STK740-441
3.3V/5A Single Output Separate Excitation
Chopper Regulator
Overview
The STK740-441 is a separate-excitation step-down
chopper regulator hybrid IC for the secondstage circuit
and optimal as a 3.3V local power supply for use in logic
circuit that includes both 5V and 3.3V systems. This IC
incorporates in the package all the necessary circuits for
a chopper regulator including power switch, error
amplifier, soft start, shutdown type output short protec-
tion, low-voltage malfunction prevention, on/off, and
snubber circuits. Therefore, external components re-
quired are input and output capacitors and choke coil
only and this allows this IC to be used to construct a
large-current (5A) chopper regulator as if a 3-pin regula-
tor were used.
Applications
• 3.3V local power supply for the logic circuit where
both 5V and 3.3V systems are constructed togeter.
Package Dimensions
unit:mm
4171-SIP12
[STK740-441]
37.0
4.5
1
2.54
12
0.5
11×2.54=27.94
2.9
SANYO : SIP-12
Features
• Adoption of Sanyo IMST ; Insulated Metal Substrate
Technology, allows the circuit to be operated without
using a heat sink (see “No Fin Output Current Derat-
ing” chart in the page 6).
• Slim package reduces mounting space.
• Typical efficiency of 88% at DC 5V input, 2.5A output.
• Fine adjustment of output voltage enable.
• 50 kHz operating frequency.
• Low-RON resistance power MOSFET adopted.
• Low-VF Schottky barrier diode adopted.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
63099RM (KT) No.6106–1/10

1 page




STK740-441 pdf
STK740-441
Sample Characteristics at Ta = 25˚C, in the test circuit
Output Voltage vs.Output Current
3.6
3.5
3.4
3.3
3.2
3.1
3.0
0
12 3 4
Output Current Io[A]
Efficiency vs.Output Current
100
90
80
70
60
50
0
12 3 4
Output Current Io[A]
VIN=5V
56
VIN=5V
56
No.6106–5/10

5 Page










PáginasTotal 10 Páginas
PDF Descargar[ Datasheet STK740-441.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
STK740-4413.3V/5A Single Output Separate Excitation Chopper RegulatorSanyo Semicon Device
Sanyo Semicon Device

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar