|
|
Número de pieza | LX2202 | |
Descripción | 2A Li-Ion Linear Charger and Power Control | |
Fabricantes | Microsemi Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LX2202 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! LX2202
TM ® 2A Li-Ion Linear Charger and Power Control
PRODUCTION DATA SHEET
DESCRIPTION
The LX2202 Linear Battery Charger is a
multi-state (2 stage) Li-Ion battery charger
(Constant current / Constant voltage) that is
designed to minimize battery charge time
(even from current limited sources such as
USB) and provide a simplified interface to
control battery discharge.
LX2202 features up to 2A charging
current from an AC adapter and an isolated
battery topology to minimize charge time
from current limited sources such as USB.
A thermal control loop maintains a safe
operating temperature at all times.
The LX2202 provides a seamless
complete battery interface. When the input
power source is removed, the LX2202
provides the discharge path for the battery
with extremely low discharge impedance.
This eliminates the need for external
discharge switch and voltage supervisors.
In USB mode, the LX2202 provides
three levels of current limit: 100mA,
500mA, and off.
The LX2202 (compared to the LX2201)
has improved charge and discharge mode
detection circuitry. A UVLO feature prevents
battery charging when VDD is less than 3.6V.
The LX2202 uses three resistors to
program the constant charge current level, for
setting the termination charge current, and for
varying the USB charge current limits.
LX2202 support two types of Li-Ion
battery chemistry; 4.1V and 4.2V through
logical input (VM pin). The LX2202
provides a charging status indicator.
The LX2202 features a pre-charge
conditioning mode for batteries that have
been deeply discharged and also has a top off
charge mode for batteries that are left on the
charger for extended periods.
The LX2202 is available in a high power
4mm x 4mm, 20-pin MLP, surface mount
package.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
KEY FEATURES
Up to 2A Charge Current
Internal Pass Element Can
Function as a Reverse Direction
Load Switch
USB Compliant Charging States
using optional USB input
Isolated Battery Topology
Low RdsON in Discharge Mode
Full Capacity Charging
True Charge Indicator
Wall Supply Regulator Tolerance
5V + 10%
Topping Charge with Voltage
Monitoring Mode
Improved charge/discharge mode
detection circuitry
Small, High Power 20-lead MLP
package
Selectable Li-Ion Battery for 4.1V
or 4.2V Applications
APPLICATIONS
Batteries up to 4AH Ratings (C/2)
Cell Phones
PDAs
Charging Cradles
Digital Cameras
Low Cost Single Li-Ion Cell Chargers
Power On/Off
Main Internal
Power Bus
Wall Adapter
B220
10µF
PRODUCT HIGHLIGHT
VDD
NU
VDD
BAT
VDD LX2202 BAT
VDD
BAT
USB
CMP
2.55k
105k 72.3k
0.1µF
To VDD
10µF
Charge
Indicator
2.49k
VID0
0
0
1
1
VID1
0
1
0
1
State Select Truth Table
VDD > VBAT
Switch open – charging
VBAT > VDD
Switch open – discharge
disabled.
disabled.
Charging – USB high level if Switch open – discharge
using USB.
disabled.
Charging – USB low level if
using USB.
Charging – USB high level if
using USB.
Battery Discharging. MOSFET
fully enhanced with current
flow VBAT to VDD.
Battery Discharging. MOSFET
fully enhanced with current
flow VBAT to VDD.
PACKAGE ORDER INFO
TA(°C)
Plastic MLP
LQ 4x4mm 20-Pin
RoHS Compliant / Pb-free
-40 to 125
LX2202CLQ
Note: Available in Tape & Reel.
Append the letters “TR” to the part number.
(i.e. LX2202CLQ-TR)
Copyright © 2004
Rev. 1.0, 2005-03-18
Microsemi
Integrated Products Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 1
1 page LX2202
TM ® 2A Li-Ion Linear Charger and Power Control
PRODUCTION DATA SHEET
APPLICATION CIRCUITS
LX2202 CONTROL FLOW DIAGRAM
START
RETURN TO START IF
VSYS > VBAT, UVLO OR EN CHANGE
STATE.
UVLO
YES
NO
VSYS > VBAT NO
YES
VID0 = 1
YES
NO
VID1= 1
YES
NO
NO CONDITION
VBAT>60%
CHARGE
MODE
YES
CONSTANT CURRENT
CHARGE MODE
USB PROG DETERMINED
BY THE STATE OF VID1.
TEMP < 140
YES
NO
IUSB <
PROG
YES
NO
REDUCE
CHARGE
CURRENT
REDUCE
CHARGE
CURRENT
NO VBAT> VCV
YES
CONSTANT VOLTAGE
CHARGE MODE
EN = HI
NO
YES
D IS C H A R G E
MODE
SW ITCH OFF
TEMP < 140
YES
NO
IUSB <
PROG
YES
NO
NO IBAT<IMIN
YES
VOLTAGE
M O N IT O R IN G
MODE (STATE).
REDUCE
CHARGE
CURRENT
REDUCE
CHARGE
CURRENT
VBAT<97%
YES
NO
RETURN TO THE TOP
OF THE CHART.
Figure 2 – Control Flow Diagram
Copyright © 2004
Rev. 1.0, 2005-03-18
Microsemi
Integrated Products Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 5
5 Page LX2202
TM ® 2A Li-Ion Linear Charger and Power Control
PRODUCTION DATA SHEET
PACKAGE DIMENSIONS
LQ 20-Pin MLPQ Plastic 4x4mm (114x114DAP)
D
E
A1
A3
b
MILLIMETERS
INCHES
L Dim MIN MAX MIN MAX
A 0.80 1.00 0.031 0.039
A1 0.00 0.05 0.000 0.002
D2 A3 0.20 REF 0.008 REF
b 0.18 0.30 0.007 0.088
D 4.00 BSC 0.157 BSC
D2 2.59 2.79 0.102 0.110
E2 E 4.00 BSC 0.157 BSC
E2 2.59 2.79 0.102 0.110
e
e
0.50 BSC
0.019 BSC
L 0.30 0.50 0.011 0.019
A
Copyright © 2004
Rev. 1.0, 2005-03-18
Microsemi
Integrated Products Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet LX2202.PDF ] |
Número de pieza | Descripción | Fabricantes |
LX2201 | USB Li-Ion Battery Charger | Microsemi Corporation |
LX2202 | 2A Li-Ion Linear Charger and Power Control | Microsemi Corporation |
LX2203 | Li-Ion Battery Charger | Microsemi Corporation |
LX2203A | Li-Ion Battery Charger | Microsemi Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |