DataSheet.es    


PDF SM3015 Data sheet ( Hoja de datos )

Número de pieza SM3015
Descripción REMOTE FAN MCU
Fabricantes SamHop Microelectronics 
Logotipo SamHop Microelectronics Logotipo



Hay una vista previa y un enlace de descarga de SM3015 (archivo pdf) en la parte inferior de esta página.


Total 24 Páginas

No Preview Available ! SM3015 Hoja de datos, Descripción, Manual

SAMHOP Microelectronics Corp.
SM3015
REMOTE FAN MCU
GENERAL DESCRIPTION
SM3015 is a multi-function Fan Controller
CMOS IC that can be applied to a variety of
consumer products. It has an elastic
function like MCU but does not need
programming, user can just write a MASK
form.
SM3015 has three or four wind modes;
normal, rhythm and sleep-rhythm wind or
normal, rhythm, sleep-normal and sleep-
rhythm, the operation pattern of rhythm and
sleep modes can be set by user.
Many kinds of timer setting and two swing
head control that include micro-swing output
can be chosen by user to tune the swing
head angle.
Memory or non-memory function is
available; the Speed, Mode, Swing functions
will operate as last state in memory type.
Supports two-bit customer codes to
distinguish different models.
FEATURES
* High performance CMOS technology.
* Rhythm wind or Normal wind for SLEEP
mode can be chosen.
* Two to three-wind grade control in wind
modes.
* Memory start-up function option.
* Many types of timer setting on three or four
steps and ladder adder or non-ladder
adder.
* Two swing head control, micro-swing output
can be chosen by MASK option.
* SPEED or ON/OFF key can enable fan
controller.
* 16 or 32 patterns per cycle of rhythm/sleep
mode, each pattern has 2.5 sec.
* Panel control or pair with SM5021B for an
infrared Remote Fan Controller.
* 16/18/20/22/24 pin plastic DIP package.
* Three types of sleep hold time by SLT key:
0.5hr/1hr/2hr.
* 32.768KHz/455KHz oscillator option.
APPLICATIONS
PIN ASSIGNMENTS (TOP VIEW)
* Electronic Fan
* Heater Fan
* Air-Cleaner
* Dehumidifier
* Humidifier
* Kitchen Exhaust
* Dish Dryer
* Wall Fan
LIGHT
DI
OFF(ON/OFF)
TIMER
SPEED
MODE
COM1
COM2
COM3
SWING1
SWING2
1
2
3
4
5
6
7
8
9
10
11
22 LTO
LIGHT
1
21 VSS
DI 2
20
OSC1
OFF(ON/OFF)
3
19 OSC2
TIMER
4
18 BUZ
SPEED
5
17 VDD
MODE
6
16 LOW
COM1
7
15 MEDIUM
COM2
8
14 STRONG
COM3
9
13 SHO1
SWING1
10
12 SHO2
NC 11
22 LTO
21 VSS
20 OSC1
19 OSC2
18 BUZ
17 VDD
16 LOW
15 MEDIUM
14 STRONG
13 SHO1
12 SHO2
SM3015A 16/18/20/22PIN
SM3015B 16/18/20/22PIN
Page 1
V.2.0 Mar 8 ,2002

1 page




SM3015 pdf
SAMHOP Microelectronics Corp.
SM3015
REMOTE FAN MCU
FUNCTION DESCRIPTION
SM3015 has two control types : panel keypad and infrared remote control.
There are four to eight control signal operations :
* Start-up by SPEED key
a. function turn off (OFF key)
b. wind mode select (MODE key)
c. start-up function and wind speed select (SPEED key)
d. timer setting (TIMER key)
e. swing head or tuner for swing angle (SW1 and SW2 key)
f. lighting control (LIGHT key)
* Start-up by ON/OFF key
a. function control (ON/OFF key)
b. wind mode select (MODE key)
c. wind speed select (SPEED key)
d. timer setting (TIMER key)
e. swing head or tuner for swing angle (SW1 and SW2 key)
f. lighting control (LIGHT key)
All functions can be planned by user like an MCU for more product application.
Only SPEED or ON/OFF key can enable the fan controller, except for the light control. Wind mode,
timer and swing head inputs can not be accepted when fan is not activated. The fan controller will be
turned off by timer and OFF (ON/OFF) key inputs.
When more than one key are pressed, controller will not accept the multi-key's control signal, if the
panel keys are pressed more than six seconds, controller will generate a " BI-BI-BI-BI" warning sound.
When fan is enabled by SPEED or ON/OFF key, the initial state of fan controller is as follows:
* Memory function available
If Fan controller is OFF on sleep mode, all memory functions will be returned to the LAST TURN
ON STATE.
a.Grade as last state but with starting medium wind for three seconds (MASK option)
b. The wind mode as last state except sleep mode
c. Swing function as last state
d. Timer setting off
e. Light is independent
* Non-memory function (Bonding option)
a. Grade is low wind function but with starting medium wind for three seconds (MASK option)
b. Normal wind mode operation
c. Timer setting and swing head off
d. Light is independent
Page 5
V.2.0 Mar 8, 2002

5 Page





SM3015 arduino
SAMHOP Microelectronics Corp.
SM3015
REMOTE FAN MCU
G. SLT KEY
When fan controller functions are on, pres
the sleep mode, then press the SLT key to set the timer of the wind grade down. The time base of
SLT key is 0.5HR/1HR/2HR.
H. MEMORY FUNCTION
Memory of speed, mode(except sleep mode) and swing functions can be set independently.
Memory function can be cancelled by Bonding option. When memory function is available, wind
speed mode and swing functions will operate as last state; if last state is sleep mode, press
SPEED or ON/OFF key enable fan controller while memory functions(Speed/Mode/Swing) will be
returned to the last state before sleep mode operation.
I. STARTING WIND
Memory or non-memory type, fan controller starts with three seconds starting wind.
J. CUSTOMER CODE
SM3015 provide two-bit customer code to distinguish different product models. There are four
types, that can be set by diode.
a. Set code bit to "0", connect diode to COM1/COM2 and SWING/SW1 terminal
b. Set code bit to "1", open the circuit.
D1 D2
00
01
10
11
D2
COM1
PIN
SWING/SW1 PIN
D1
COM2
PIN
Page 11
V.2.0 Mar 8, 2002

11 Page







PáginasTotal 24 Páginas
PDF Descargar[ Datasheet SM3015.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SM301(SM301 - SM307) Surface Mount RectifiersGrande Electronics
Grande Electronics
SM30100DSchottky Barrier RectifiersSeCoS
SeCoS
SM3015REMOTE FAN MCUSamHop Microelectronics
SamHop Microelectronics
SM3016NSUN-Channel Enhancement Mode MOSFETSinopower
Sinopower

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar