|
|
Número de pieza | SG1540 | |
Descripción | OFF-LINE START-UP CONTROLLER | |
Fabricantes | Microsemi Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SG1540 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! SG1540/SG2540/SG3540
OFF-LINE START-UP CONTROLLER
DESCRIPTION
The SG1540 is an integrated circuit designed to efficiently provide
start-up power from a high-voltage DC bus to a PWM control circuit
in a switching power supply. When used on the primary side, it
reduces start-up current to less than 1mA and allows any standard
PWM control circuit to be used as a primary-side controller. When
used to power a controller on the secondary side, it efficiently
eliminates the need for a heavy 50/60Hz line transformer with its
associated low frequency magnetic fields.
The circuit consists of three sections: a micropower bandgap
comparator/power switch referenced to 2.5 volts which isolates the
start-up capacitor from its load; a high frequency square-wave
oscillator with 200mA totem-pole output for driving an isolation
transformer; and a second bandgap comparator with latching
crowbar to protect against overvoltage faults while starting or
running.
The SG1540 is specified for operation over the full military ambient
temperature range of -55°C to 125°C. The SG2540 is character-
ized for the industrial range of -25°C to 85°C, and the SG3540 is
designed for the commercial range of 0°C to 70°C.
FEATURES
• Useable with primary and secondary side PWM
controllers
• Micropower comparator / switch
- Internal 2.5V bandgap reference
- 50mA power switch
• Squarewave oscillator
- 500Hz to 200KHz operation
- 200mA totem pole outputs
• Eliminates bulky, expensive 50/60 Hz transformer
• Minimizes high voltage bleeder current
• Programmable start-up voltage and hysteresis
• Internal and programmable overvoltage crowbar
latch
• Available in 8 pin DIP, 10 pin flat pack, and 16 pin
widebody SOIC
HIGH RELIABILITY FEATURES - SG1540
♦ Available to MIL-STD - 883
♦ LMI level "S" processing available
BLOCK DIAGRAM
4/90 Rev 1.1 2/94
Copyright © 1994
LINFINITY Microelectronics Inc.
1 11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞ FAX: (714) 893-2570
1 page SG1540/SG2540/SG3540
APPLICATIONS INFORMATION (continued)
The voltage waveform at +VIN is shown in Figure 4 with these resistor values and with CSTART = 3µF. Notice that two tries are required
before the +15 volt bootstrap winding becomes active.
FIGURE 4 - STARTUP VOLTAGE WAVEFORM
FIGURE 5 - SECONDARY-SIDE START-UP WITHOUT A LINE TRANSFORMER
4/90 Rev 1.1 2/94
Copyright © 1994
LINFINITY Microelectronics Inc.
5 11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞ FAX: (714) 893-2570
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet SG1540.PDF ] |
Número de pieza | Descripción | Fabricantes |
SG1540 | OFF-LINE START-UP CONTROLLER | Microsemi Corporation |
SG1540Y | OFF-LINE START-UP CONTROLLER | Microsemi Corporation |
SG1543 | POWER SUPPLY OUTPUT SUPERVISORY CIRCUIT | Microsemi Corporation |
SG1543J | POWER SUPPLY OUTPUT SUPERVISORY CIRCUIT | Microsemi Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |