|
|
PDF PS9613L-V-E3 Data sheet ( Hoja de datos )
| Número de pieza | PS9613L-V-E3 | |
| Descripción | 1 Mbps / OPEN COLLECTOR OUTPUT / FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 8-PIN DIP PHOTOCOUPLER | |
| Fabricantes | NEC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PS9613L-V-E3 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
DATA SHEET
PHOTOCOUPLER
PS9613,PS9613L
1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE
INTELLIGENT POWER MODULE
8-PIN DIP PHOTOCOUPLER
−NEPOCTM Series−
DESCRIPTION
The PS9613 and PS9613L are optically coupled isolators containing a GaAlAs LED on the input side and a photo
diode and a signal processing circuit on the output side on one chip.
The PS9613 is in a plastic DIP (Dual In-line Package) and the PS9613L is lead bending type (Gull-wing) for
surface mounting.
FEATURES
• High instantaneous common mode rejection voltage (CMH, CML = ±15 kV/µs MIN.)
• High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.)
• Maximum propagation delays (tPLH − tPHL = 270 ns TYP.)
• Pulse width distortion ( | tPHL − tPLH | = 270 ns TYP.)
• Ordering number of taping product: PS9613L-E3, E4: 1 000 pcs/reel
• UL approved: File No. E72422 (S)
• VDE0884 approved (Option)
APPLICATIONS
• IPM Driver
• General purpose inverter
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P13981EJ2V0DS00 (2nd edition)
Date Published May 2000 NS CP(K)
Printed in Japan
©
1998, 2000
1 page  
PS9613,PS9613L
ELECTRICAL CHARACTERISTICS (TA = −40 to +100 °C, VCC = 15 V, unless otherwise specified)
Parameter
Symbol
Conditions
Diode Forward Voltage
VF IF = 10 mA
Reverse Current
Terminal Capacitance
IR VR = 3 V
Ct V = 0 V, f = 1 MHz, TA = 25 °C
Detector Low Level Output Voltage
VOL IF = 10 mA, VCC = 5 V, IO = 2.4 mA
High Level Output Current
IOH VCC = 30 V, VF = 0.8 V
High Level Supply Current
ICCH VCC = 30 V, VF = 0.8 V, VO = open
Low Level Supply Current
Coupled Threshold Input Current
(H → L)
ICCL VCC = 30 V, IF = 10 mA, VO = open
IFHL VO = 0.8 V, IO = 0.75 mA
Current Transfer Ratio (IC/IF)
Isolation Resistance
CTR
RI-O
IF = 10 mA, VO = 0.6 V
VI-O = 1 kVDC, RH = 40 to 60 %,
TA = 25 °C
Isolation Capacitance
Propagation Delay Time
(H → L) *2
Propagation Delay Time
(L → H) *2
Maximum Propagation
Delays
Pulse Width Distortion
(PWD) *2
Instantaneous Common
Mode Rejection Voltage
(Output: High) *3
Instantaneous Common
Mode Rejection Voltage
(Output: Low) *3
CI-O V = 0 V, f = 1 MHz, TA = 25 °C
tPHL IF = 10mA, RL = 20 kΩ, CL = 100 pF,
VTHHL = 1.5 V, VTHLH = 2.0 V
tPLH
tPLH−tPHL
|tPHL−tPLH|
CMH
CML
TA = 25 °C, IF = 0 mA, VO > 3.0 V,
VCM = 1.5 kV, RL = 20 kΩ,
CL = 100 pF
TA = 25 °C, IF = 10 mA, VO < 1.0 V,
VCM = 1.5 kV, RL = 20 kΩ,
CL = 100 pF
MIN.
1.3
TYP. *1
1.65
30
0.13
1.0
0.6
0.6
1.5
MAX.
2.1
200
0.6
50
1.3
1.3
5.0
Unit
V
µA
pF
V
µA
mA
mA
mA
44 110
1011
%
Ω
0.6
250 500
pF
ns
520 750
−200
270
650
270 650
15 kV/µs
15 kV/µs
Data Sheet P13981EJ2V0DS00
5
5 Page 
PS9613,PS9613L
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
235 °C or below (package surface temperature)
• Time of temperature higher than 210 °C 30 seconds or less
• Number of reflows
Three
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt % is recommended.)
Recommended Temperature Profile of Infrared Reflow
100 to 160 ˚C
60 to 120 s
(preheating)
(heating)
to 10 s
to 30 s
235 ˚C (peak temperature)
210 ˚C
Time (s)
(2) Dip soldering
• Temperature
• Time
• Number of times
• Flux
260 °C or below (molten solder temperature)
10 seconds or less
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of
0.2 Wt % is recommended.)
(3) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
Data Sheet P13981EJ2V0DS00
11
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet PS9613L-V-E3.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PS9613L-V-E3 | 1 Mbps / OPEN COLLECTOR OUTPUT / FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 8-PIN DIP PHOTOCOUPLER | NEC |
| PS9613L-V-E4 | 1 Mbps / OPEN COLLECTOR OUTPUT / FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 8-PIN DIP PHOTOCOUPLER | NEC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |