DataSheet.es    


PDF PMB2313T Data sheet ( Hoja de datos )

Número de pieza PMB2313T
Descripción Prescaler Circuit 1.1 GHz
Fabricantes Infineon Technologies AG 
Logotipo Infineon Technologies AG Logotipo



Hay una vista previa y un enlace de descarga de PMB2313T (archivo pdf) en la parte inferior de esta página.


Total 20 Páginas

No Preview Available ! PMB2313T Hoja de datos, Descripción, Manual

Data Sheet, Version 1.2, December 2003
Prescaler Circuit 1.1 GHz
PMB 2313T
Version 1.5
Wireless Infrastructure
Never stop thinking.

1 page




PMB2313T pdf
PMB 2313T
Version 1.5
Overview
1 Overview – Prescaler Circuit 1.1 GHz
1.1 Functional Description/ Application
This IC is designed for use in mobile radio communication devices up to 1100 MHz.
Due to low power consumption and low phase noise generation, the PMB2313T is suitable for use in battery
powered handheld systems, e.g. GSM, cordless telephones and cordless consumer products, as well as in
basestations.
Low supply voltage down to 2.7V. It can be switched to a low-power standby mode. Internal current source at the
emitter follower output.
No external resistor needed in typical applications.
The divide ratio is 1:64/65 or 1:128/129 depending on the external circuit configuration.
The IC is board level compatible to the PMB 2312 prescaler.
1.2 Circuit Description
The differential inputs of the IC may be connected either balanced or single ended. In the latter case the unused
input must be RF-grounded with a capacitor (about 1.5 nF) with a low serial inductance.
Depending on the logic level at SW input the basic divide ratio of the ECL-stages is fixed to 1:64/65 or 1:128/129.
The MOD input determines whether modulus 1:n or 1:n+1 (n=64 or 128 according to SW-level) is active.
The IC can be switched to a low-power standby mode (input STB).
The MOD input is TTL/CMOS compatible.
The emitter follower output is CMOS compatible according to the application circuit on page 11. The minimum logic
swing is 0.8 Vpp.
Table 1 Function Table
Input pin
SW
MOD
STB
Logic level
HIGH = US-0.1 V to US
LOW = GND to 0.8 V or open
HIGH = 2.0 V to US or open
LOW = GND to 0.8 V
HIGH = US-0.1 V to US
LOW = GND to 0.8 V
Prescaler function
1:64/65
1:128/129
1:64/1:128
1:65/1:129
Divider
Q=HIGH, STANDBY-mode
Data Sheet
5 Version 1.2, 2003-12-01

5 Page





PMB2313T arduino
8 Application Circuit
PMB 2313T
Version 1.5
Application Circuit
GND
5
MOD
6
STB
7
I2 8
1nF
PMB
2313
4Q
SW
3
2 US
1 I1
1n
F
ca. 1nF
US
MOD
CMOS-PLL
PMB 2304
PD
LF
(SW connected for 1:64/65 divider ratio)
VCO
Data Sheet
11 Version 1.2, 2003-12-01

11 Page







PáginasTotal 20 Páginas
PDF Descargar[ Datasheet PMB2313T.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
PMB2313TPrescaler Circuit 1.1 GHzInfineon Technologies AG
Infineon Technologies AG

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar