DataSheet.es    


PDF MK74CB218R Data sheet ( Hoja de datos )

Número de pieza MK74CB218R
Descripción Dual 1 to 8 Buffalo Clock Driver
Fabricantes Integrated Circuit Systems 
Logotipo Integrated Circuit Systems Logotipo



Hay una vista previa y un enlace de descarga de MK74CB218R (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! MK74CB218R Hoja de datos, Descripción, Manual

PRELIMINARY INFORMATION
MK74CB218
Dual 1 to 8 Buffalo™ Clock Driver
Description
The MK74CB218 Buffalo™ is a monolithic
CMOS high speed clock driver. It consists of two
identical single input to eight low-skew output,
non-inverting clock drivers. This eliminates
concerns of part to part matching in many
systems. The MK74CB218 is packaged in the
tiny 28 pin SSOP, which uses the same board
space as the narrow 16 pin SOIC. The inputs can
be connected together for a 1 to 16 fanout buffer.
A quad 1 to 4, and PECL versions, are also
available. Consult ICS for more details.
The MK74CB218 can also act as a voltage
translator, since it is possible to run the inputs at
3.3 V and the outputs at 2.5 V.
Features
• Tiny 28 pin SSOP (150 mil) package
• Dual one input to eight output clock drivers
• Outputs are skew matched to within 250 ps
• A outputs and B outputs matched to 250 ps
• 2.5 V, 3.3 V or 5 V supply voltages
• Output Enable tri-states each bank of eight
• Clock speeds up to 200 MHz
Family of ICS Parts
The MK74CB218 Buffalo™ is designed to be used
with ICS’s clock synthesizer devices. The inputs of the
Buffalo are matched to the outputs of ICS clock
synthesizers. Consult ICS for applications support.
Block Diagram
INA
QA0
QA1
QA2
QA3
QA4
QA5
QA6
QA7
VDDA
VDD
GND
OE (all outputs)
VDDB
INB
QB0
QB1
QB2
QB3
QB4
QB5
QB6
QB7
MDS 74CB218 A
1
Revision 021600
Printed 11/16/00
IntegratedCircuit Systems, Inc. • 525 Race Street • San Jose •CA •95126•(408) 295-9800tel • www.icst.com

1 page




MK74CB218R pdf
PRELIMINARY INFORMATION
MK74CB218
Dual 1 to 8 Buffalo™ Clock Driver
Package Outline and Package Dimensions
(For current dimensional specifications, see JEDEC Publication No. 95.)
E1 E
INDEX
AREA
1
2
D
A1
e
c
b
28 pin SSOP
Symbol
A
A1
b
c
D
e
E
E1
L
Inches
Min Max
0.053 0.069
0.004 0.010
0.008 0.012
0.007 0.010
0.337 0.344
.025 BSC
0.228 0.244
0.150 0.157
0.016 0.050
Millimeters
Min Max
1.35 1.75
0.10 0.25
0.20 0.30
0.18 0.25
8.55 8.75
0.635 BSC
5.80 6.20
3.80 4.00
0.40 1.27
A
L
Ordering Information
Part/Order Number
MK74CB218R
MK74CB218RTR
Marking
MK74CB218R
MK74CB218R
Package
28 pin SSOP
Add Tape & Reel
Temperature
0-70 °C
0-70 °C
While the information presented herein has been checked for both accuracy and reliability, ICS Incorporated assumes no responsibility for either its use or for the infringement of
any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal
commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not
recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS
product for use in life support devices or critical medical instruments.
Buffalo is a trademark of ICS Incorporated
MDS 74CB218 A
5
Revision 021600
Printed 11/16/00
IntegratedCircuit Systems, Inc. • 525 Race Street • San Jose •CA •95126•(408) 295-9800tel • www.icst.com

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet MK74CB218R.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MK74CB218Dual 1 to 8 Buffalo Clock DriverIntegrated Circuit Systems
Integrated Circuit Systems
MK74CB218RDual 1 to 8 Buffalo Clock DriverIntegrated Circuit Systems
Integrated Circuit Systems
MK74CB218RTRDual 1 to 8 Buffalo Clock DriverIntegrated Circuit Systems
Integrated Circuit Systems

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar