DataSheet.es    


PDF LMS1485 Data sheet ( Hoja de datos )

Número de pieza LMS1485
Descripción 5V Low Power RS-485 Differential Bus Transceiver
Fabricantes National Semiconductor 
Logotipo National Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de LMS1485 (archivo pdf) en la parte inferior de esta página.


Total 10 Páginas

No Preview Available ! LMS1485 Hoja de datos, Descripción, Manual

July 2003
LMS1485
5V Low Power RS-485 Differential Bus Transceiver
General Description
The LMS1485 is a low power differential bus/line transceiver
designed for high speed bidirectional data communication on
multipoint bus transmission lines. It is designed for balanced
transmission lines. It meets ANSI Standards TIA/EIA
RS422-B, TIA/EIA RS485-A and ITU recommendation and
V.11 and X.27.
The LMS1485 combines a TRI-STATEdifferential line
driver and differential input receiver, both of which operate
from a single 5.0V power supply. The driver and receiver
have an active high and active low, respectively, that can be
externally connected to function as a direction control. The
driver and receiver differential inputs are internally con-
nected to form differential input/output (I/O) bus ports that
are designed to offer minimum loading to bus whenever the
driver is disabled or when VCC = 0V. These ports feature
wide positive and negative common mode voltage ranges,
making the device suitable for multipoint applications in
noisy environments.
The LMS1485 is build with National’s advanced BiCMOS
process and is available in a 8-Pin SOIC package. It is a
drop-in socket replacement to ADI’s ADM1485 and LTC’s
LT1485.
Features
n Meet ANSI standard RS-485-A and RS-422-B
n Data rate 30Mbps
n Single supply voltage operation, 5V
n Wide input and output voltage range
n Thermal shutdown protection
n Short circuit protection
n Driver propagation delay 10ns
n Receiver propagation delay 25ns
n High impedance outputs with power off
n Open circuit fail-safe for receiver
n Extended operating temperature range −40˚C to 85˚C
n ESD rating 8kV HBM
n Drop-in replacement to ADM1485 and LT1485
n Available in 8-pin SOIC
n Low supply current, ICC = 1mA
Applications
n Low power RS-485 systems
n Network hubs, bridges, and routers
n Point of sales equipment (ATM, barcode scanners,…)
n Local area networks (LAN)
n Integrated service digital network (ISDN)
n Industrial programmable logic controllers
n High speed parallel and serial applications
n Multipoint applications with noisy environment
Typical Application
20048801
A typical multipoint application is shown in the above figure. Terminating resistors, RT, are typically required but only located at the two ends of the cable.
Pull up and pull down resistors maybe required at the end of the bus to provide failsafe biasing. The biasing resistors provide a bias to the cable when all
drivers are in TRI-STATE, See National Application Note, AN-847 for further information.
© 2003 National Semiconductor Corporation DS200488
www.national.com

1 page




LMS1485 pdf
Typical Performance Characteristics
Receiver Output Low Voltage vs. Output Current
Receiver Output High Voltage vs. Output Current
20048813
Receiver Output High Voltage vs. Temperature
20048814
Receiver Output Low Voltage vs. Temperature
20048815
Driver Differential Output Voltage vs. Output Current
20048816
Driver Differential Output Voltage vs. Temperature
RL = 54
20048817
5
20048818
www.national.com

5 Page










PáginasTotal 10 Páginas
PDF Descargar[ Datasheet LMS1485.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LMS1485LMS1485 5V Low Power RS-485 Differential Bus Transceiver (Rev. F)Texas Instruments
Texas Instruments
LMS14855V Low Power RS-485 Differential Bus TransceiverNational Semiconductor
National Semiconductor
LMS1487LMS1487 5V Low Power RS-485 / RS-422 Differential Bus Transceiver (Rev. F)Texas Instruments
Texas Instruments
LMS14875V Low Power RS-485 / RS-422 Differential Bus TransceiverNational Semiconductor
National Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar