|
|
PDF LB1412M Data sheet ( Hoja de datos )
| Número de pieza | LB1412M | |
| Descripción | Level Meter for 12 LEDs | |
| Fabricantes | Sanyo | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LB1412M (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Ordering number: EN1593B
Monolithic Digital IC
LB1412M
Level Meter for 12 LEDs
Functions and Features
. Bar-shaped display of input level by means of 12 LEDs.
. High-order 5 dots with peak hold.
. Built-in oscillator for peak hold reset. Requires 1pce each of
external C, R. Uses either oscillator at the time of stereo
. operation. Also capable of resetting manually.
Capable of constant-current driving low-order 7 dots (green
LED). Constant-current value variable with an external
. resistor.
Lower current drain available by connecting green LEDs in
series.
. Built-in input amplifier.
. Requires no other light-up level adjustment than adjustment
. for 0 dB. D1 error: Within ±3 dB of 20 dB
Supply voltage range: 10 to 16 V
Specifications
Package Dimensions
unit : mm
3045B-MFP24
[LB1412M]
SANYO : MFP24
Absolute Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Output current
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
IOL
Pd max
Topr
Tstg
Conditions
Pin 16
Pins 2 to 6: D8 to D12, output on
Ta = 60°C
Allowable Operating Range at Ta = 25°C
Ratings
–0.3 to +18
30
380
–30 to +75
–40 to +125
Unit
V
mA
mW
°C
°C
Parameter
Supply voltage
Symbol
VCC
Conditions
Ratings
10 to 16
Unit
V
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
53096HA(II)/9087KI/9134KI,TS No.1593-1/5
1 page  
LB1412M
2-5 Reset pin (Pin 12)
When the reset pin is open, peak hold of D8 to D12 occurs. When the reset pin is connected to GND, reset occurs.
Connecting the reset pin to GND causes no peak hold.
2-6 C1, R1
The oscillation cycle of oscillator depends on the product of C1 and R1. The oscillation cycle at C1 = 2.2 µF, R1 = 1 MΩ is
approximately 2 seconds. However, if an electrolytic capacitor is used for C1, the actual capacitance differs from the marked
value.
2-7 Reduction in number of parts
R3, R4, VR1 are substituted by one VR.
Unit (resistance: Ω, capacitance: F)
No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment,
nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or
indirectly cause injury, death or property loss.
Anyone purchasing any products described or contained herein for an above-mentioned use shall:
1 Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors
and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and
expenses associated with such use:
2 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO
ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume
production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use
or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of May, 1996. Specifications and information herein are subject to change without notice.
No.1593-5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet LB1412M.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LB1412 | Level Meter Driver for 12 LEDs | Sanyo |
| LB1412M | Level Meter for 12 LEDs | Sanyo |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |