|
|
Número de pieza | TLE4966H | |
Descripción | High Precision Hall-Effect Switch | |
Fabricantes | Infineon Technologies AG | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TLE4966H (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! High Precision Hall-Effect Switch
Data Sheet Version 1.0
2003-11-20
TLE4966H
Features
• 2.7V to 24V supply voltage operation
• Operation from unregulated power supply
• High sensitivity and high stability of the
magnetic switching points
• High resistance to mechanical stress by active
error compensation
• Reverse battery protection (-18V)
• Superior temperature stability
• Peak temperatures up to 195°C without
damage
• Low jitter (typ. 1µs)
• Digital output signal
• Bipolar version
• Excellent matching between the 2 Hall probes
• Hall plate distance 1.45mm
• Direction & speed information
• Direction signal switches 1 µs before the speed signal
• SMD package P-TSOP-6-6-3
P-TSOP-6-6-3
Type
TLE4966H
Ordering Code
Q62705-K693
Package
P-TSOP-6-6-3
Functional Description
The TLE4966H is an integrated circuit double Hall-effect sensor designed specifically for
highly accurate applications. Precise magnetic switching points and high temperature
stability are achieved by active compensation circuits and chopper techniques on chip.
The TLE4966H provides a speed signal at Q2 for every magnetic pole pair and a direction
information at Q1. The direction output switches 1µs (min.) before the speed output.
1 page TLE4966H
AC/DC Characteristics
over operating range, unless otherwise specified. Typical values correspond to VS=12V
and TA=25°C.
Parameter
Symbol min. typ. max. Unit Conditions
Supply Current
Reverse Current
Output Saturation Voltage
Output Leakage Current
Output Fall Time
IS
ISR
VQSAT
IQLEAK
tf
3 5.5 8 mA VS = 2.7V .. 18V
0 0.2 1 mA VS= -18V
- 0.3 0.6 V IQ= 10mA
- 0.05 10 µA for VQ=18 V
- 0.2 1 µs RL= 1.2 kOhm ;CL<50pF;
Figure 3
Output Rise Time
tr - 0.2 1 µs RL= 1.2 kOhm ;CL<50pF;
Figure 3
Chopper Frequency
Switching Frequency
Delay Time2)
Delay of Count Signal
Output Jitter3)
fOSC
fSW
td
td,count
tQJ
- 320 - kHz
0 - 151) kHz
- 13 - µs
- 1 - µs
- 1 - µsRMS Typ. Value for Square-Wave
Signal 1kHz
Repeatability of magnetic
thresholds4)
BREP
- 40 - µTRMS Typ. Value for
∆B/∆t>12mT/ms
Power-On Time5)
tPON - 13 - µs VS >= 2.7V
Distance of Hall plates
Thermal Resistance6)
dHALL
RthJA
- 1.45 - mm
- 100 - K/W
P-TSOP-6-6-3
1) To operate the sensor at the max. switching frequency, the value of the magnetic signal
amplitude must be 1.4 times higher than for static fields. This is due to the -3dB corner frequency
of the low pass filter in the signal path.
2) Systematic delay between magnetic threshold reached and output switching.
3) Jitter is the unpredictable deviation of the output switching delay.
4)
5)
6)
BREP is equivalent to the noise constant.
Time from applying VS >= 2.7 V to the sensor
Thermal resistance from junction to ambient.
until
the
output
state
is
valid.
e.g.: VS=12.0 V, IS_typ=5.5 mA, VQSAT_typ=0.3 V, 2*IQ=10mA => Power Dissipation Pdis= 72.0 mW.
In TA = Tj – (RthJA * Pdis) = 175 °C – (100 K/W * 0.072 W) => TA = 167.8 °C
Data Sheet
5/11
2003-11-20
5 Page TLE4966H
Revision History: Version 1.0
Previous Version:
Page
Subjects (major changes since last revision)
TLE4966H
2003-11-20
For questions on technology, delivery and prices please contact the Infineon
Technologies Offices in Germany or the Infineon Technologies Companies and
Representatives worldwide: see our webpage at http://www.infineon.com
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to:
Edition 2001-02-22
Published by Infineon Technologies AG
St.-Martin-Strasse 53
D-81541 München
© Infineon Technologies AG 2000
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as
warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-
infringement, regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your
nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives
worldwide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on
the types in question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the
express written approval of Infineon Technologies, if a failure of such components can reasonably
be expected to cause the failure of that life-support device or system, or to affect the safety or
effectiveness of that device or system. Life support devices or systems are intended to be
implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If
they fail, it is reasonable to assume that the health of the user or other persons may be
endangered.
Data Sheet
11/11
2003-11-20
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet TLE4966H.PDF ] |
Número de pieza | Descripción | Fabricantes |
TLE4966H | High Precision Hall-Effect Switch | Infineon Technologies AG |
TLE4966L | High Precision Hall-Effect Switch | Infineon Technologies AG |
TLE4966V-1K | In Plane Sensing with Vertical Dual Hall Effect Latch | Infineon |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |