|
|
Número de pieza | TLE4206G | |
Descripción | 1-A DC Motor Driver for Servo Driver Applications | |
Fabricantes | Siemens Semiconductor Group | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TLE4206G (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
No Preview Available ! 1-A DC Motor Driver for Servo Driver Applications
TLE 4206
Overview
Features
• Optimized for headlight beam control applications
• Current-peak-blanking (no electrolytic capacitor at VS)
• Delivers up to 0.8 A continuous
• Low saturation voltage; typ.1.2 V total @ 25 °C; 0.4 A
• Output protected against short circuit
• Overtemperature protection with hysteresis
• Over- and undervoltage lockout
• No crossover current
• Internal clamp diodes
• Enhanced power packages
P-DIP-16-5
Type
TLE 4206
TLE 4206 G
Ordering Code
Q67000-A9303
Q67006-A9299
Package
P-DIP-16-5
P-DSO-14-4
P-DSO-14-4
Description
The TLE 4206 is a fully protected H-Bridge Driver designed specifically for automotive
headlight beam control and industrial servo control applications.
The part is built using the Siemens bipolar high voltage power technology DOPL.
The standard enhanced power P-DSO-14 package meets the application requirements
and saves PCB-board space and costs. A P-DIP-16 package is also available.
The servo-loop-parameter pos.- and neg. Hysteresis, pos.- and neg. deadband and
angle-amplification are programmable with external resitors.
An internal window-comparator controls the input line. In the case of a fault condition,
like short circuit to GND, short circuit to supply-voltage, and broken wire, the
TLE 4206 stops the motor immediately (brake condition).
The “programable current-peak-blanking” disables the servo-loop during the VS voltage
drop caused by the stall current spike. So there is no need of an electrolytic blocking
capacitor at the VS-terminal.
Furthermore the built in features like over- and undervoltage-lockout, short-circuit-
protection and over-temperature-protection will open a wide range of automotive- and
industrial applications.
Semiconductor Group
1
1998-02-01
1 page TLE 4206
Operating Range
Parameter
Supply voltage
Symbol Limit Values
min.
max.
VS 8
18
Supply voltage increasing VS
Supply voltage decreasing VS
Output current
IOUT1-2
Input current (FB, REF) IIN
Junction temperature
Tj
– 0.3
– 0.3
– 0.8
– 50
– 40
VUV ON
VUV OFF
0.8
500
150
Unit Remarks
V After VS rising
above VUV ON
V Outputs in tristate
V Outputs in tristate
A–
µA –
°C –
Semiconductor Group
5
1998-02-01
5 Page TLE 4206
VMotor =VOUT1 -VOUT2
-2.0%
-0.4%
0.4%
(VREF -VFB)/VS
2.0%
HYL
Expressions:
HY = Hysteresis
DB = Deadband
H = High
L = Low
W = Window
DBW
DBL DBH
HYW
HYH
Figure 4 Hysteresis, Phaselag and Deadband-Definitions
Motor
Status
Turn
CW
Brake
Turn
CCW
AED02260
Semiconductor Group
11
1998-02-01
11 Page |
Páginas | Total 14 Páginas | |
PDF Descargar | [ Datasheet TLE4206G.PDF ] |
Número de pieza | Descripción | Fabricantes |
TLE4206 | 1-A DC Motor Driver for Servo Driver Applications | Siemens Semiconductor Group |
TLE4206-2G | 1-A DC Motor Driver | Infineon |
TLE4206-4G | H-Bridge Driver Headlight Beam Controller | Infineon |
TLE4206G | 1-A DC Motor Driver for Servo Driver Applications | Siemens Semiconductor Group |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |