|
|
Número de pieza | ZMM3.0 | |
Descripción | Surface mount Silicon Planar Zener Diodes | |
Fabricantes | Diotec Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ZMM3.0 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
No Preview Available ! ZMM 1 … ZMM 100 (500 mW)
Surface mount
Silicon Planar Zener Diodes
Silizium-Planar-Zener-Dioden
für die Oberflächenmontage
1.45
Dimensions / Maße in mm
Maximum power dissipation
Maximale Verlustleistung
Nominal Z-voltage
Nominale Z-Spannung
Glass case MiniMELF
Glasgehäuse MiniMELF
Weight approx. – Gewicht ca.
Standard packaging taped and reeled
Standard Lieferform gegurtet auf Rolle
500 mW
1…100 V
SOD-80
DO-213AA
0.05 g
see page 18
siehe Seite 18
Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard.
Other voltage tolerances and higher Zener voltages on request.
Die Toleranz der Zener-Spannung ist in der Standard-Ausführung gestuft nach der internationa-len
Reihe E 24 (~5%). Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage.
Maximum ratings and Characteristics
Grenz- und Kennwerte
Power dissipation
Verlustleistung
TA = 25/C
Ptot 500 mW 1)
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
Tj – 50...+175/C
TS – 50...+175/C
RthA < 300 K/W 1)
Zener voltages see table on next page – Zener-Spannungen siehe Tabelle auf der nächsten Seite
1) Mounted on P.C. board with 25 mm2 copper pads at each terminal
Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lötpad) an jedem Anschluß
2) Tested with pulses tp = 20 ms – Gemessen mit Impulsen tp = 20 ms
3) The ZMM 1 is a diode operated in forward. Hence, the index of all parameters should be “F” instead of “Z”.
The cathode, indicated by the blue ring is to be connected to the negative pole.
Die ZMM 1 ist eine in Durchlaß betriebene Si-Diode. Daher ist bei allen Kenn- und Grenzwerten der Index
“F” anstatt “Z” zu setzten. Die durch den blauen Ring gekennzeichnete Kathode ist mit dem Minuspol zu verbinden.
07.01.2003
1
1 page |
Páginas | Total 4 Páginas | |
PDF Descargar | [ Datasheet ZMM3.0.PDF ] |
Número de pieza | Descripción | Fabricantes |
ZMM3.0 | SILICON PLANAR POWER ZENER DIODES | Semtech Corporation |
ZMM3.0 | Surface mount Silicon Planar Zener Diodes | Diotec Semiconductor |
ZMM3.3 | Silicon Planar Zener Diodes | General Semiconductor |
ZMM3.3 | SILICON PLANAR POWER ZENER DIODES | Semtech Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |