|
|
Número de pieza | CXB1585N | |
Descripción | Fibre Channel Repeater | |
Fabricantes | Sony Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CXB1585N (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
No Preview Available ! Fibre Channel Repeater
Description
The CXB1585N is a repeater IC with a built-in PLL
clock recovery circuit for Fibre Channel 1.06Gbaud.
This IC incorporates a port bypass circuit and is
suitable for disk array and FC-AL HUB, etc.
Features
• Conforms to ANSI X3T11 Fibre Channel standard
• Single 3.3V power supply
• Low power consumption: 330mW (Typ.)
• Low jitter
• PLL lock detection circuit
• Port bypass circuit
• Small plastic package (24-pin SSOP)
Applications
• Fibre channel arbitrated loop 1.0625Gbaud HUB
• Disk array
Structure
Bipolar silicon monolithic IC
Pin Configuration
TEST1 1
VCCG 2
TDSEL∗ 3
SDIN 4
SDIN∗ 5
LKREF∗ 6
TDIN 7
TDIN∗ 8
REFCLK 9
VEET 10
VEEP 11
REXT 12
24 VEEG
23 VEEE
22 VCCE
21 SDOUT
20 SDOUT∗
19 TEST2
18 LKDT
17 TDOUT
16 TDOUT∗
15 VCCP
14 LPFPOS
13 LPFNEG
CXB1585N
24 pin SSOP (Plastic)
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E96301-ST
1 page CXB1585N
Pin
No.
Symbol
Type
Typical pin
I/O voltage
Equivalent circuit
Description
7, 8
TDIN
TDIN∗
ECL
input
VCCE
ECL level
ECL_IN
ECL_IN∗
VCCG
VCCE – 1.3V
Serial data input.
VEEE
VEEG
VCCG
9
REFCLK
TTL
input
TTL level TTL_IN
VEET
10 VEET
11 VEEP
Power
supply
Power
supply
0V
0V
12 REXT
External
parts
connection
pin
—
Reference clock input.
This pin is used for
the PLL to take the
frequency.
Input 53.125MHz to
this pin.
VEET
VCCP
REXT
VEEP
Negative power supply
for REFCLK input.
Negative power supply
for internal PLL.
Connects the resistor
which determines the
VCO center
frequency.
4.7kΩ resistor should
be connected
between this pin and
VEEP.
VCCP
External
LPF_A
13, LPFNEG parts
14 LPFPOS connection
—
LPF_B
pin
VEEP
–5–
Connects the
external loop filter.
5 Page 3. Power supply
CXB1585N
3.3V
22µF
VCCT
0.1µF
22µF
VEET
VCCG
0.1µF
22µF
VEEG
VCCP
0.1µF
VEEP
Fig. 3. Power Supply Circuit
4. SDIN, SDIN∗ inputs
Normally, the VCO performs frequency comparison with the SDIN and SDIN∗ serial data. When there is no
input to SDIN and SDIN∗, frequency comparison is executed with REFCLK. However, the frequency may not
be compared to REFCLK if the noise and others are detected as a signal for no signal state because the both
phases of the ECL differential inputs are internally biased to VBB shown below. As countermeasure to this,
connect either of the differential inputs to VCC via a resistor to generate the voltage difference for the both
phases.
VCC
50Ω
TRANS.
LINE
220kΩ
330pF
18kΩ
VBB (VCC – 1.3V)
330pF
50Ω 50Ω
VTT (VCC – 2V)
18kΩ
ECL differential input buffer
ECL differential signal from 50Ω transmission line
Fig. 4. SDIN and SDIN∗ Input Example
– 11 –
11 Page |
Páginas | Total 14 Páginas | |
PDF Descargar | [ Datasheet CXB1585N.PDF ] |
Número de pieza | Descripción | Fabricantes |
CXB1585N | Fibre Channel Repeater | Sony Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |