DataSheet.es    


PDF CXP811P24 Data sheet ( Hoja de datos )

Número de pieza CXP811P24
Descripción CMOS 8-bit Single Chip Microcomputer
Fabricantes Sony Corporation 
Logotipo Sony Corporation Logotipo



Hay una vista previa y un enlace de descarga de CXP811P24 (archivo pdf) en la parte inferior de esta página.


Total 27 Páginas

No Preview Available ! CXP811P24 Hoja de datos, Descripción, Manual

CXP811P24
CMOS 8-bit Single Chip Microcomputer
Description
The CXP811P24 is a CMOS 8-bit microcomputer
which consists of A/D converter, serial interface,
timer/counter, time base timer, PWM output, as well
as basic configurations like 8-bit CPU, PROM, RAM
and I/O port. They are integrated into a single chip.
Also the CXP811P24 provides power-on reset
function, sleep/stop function which enables to lower
power consumption .
The CXP811P24 is the PROM-incorporated version
of the CXP81120/81124 with built-in mask ROM.
This provides the additional feature of being able to
write directly into the program. Thus, it is most suitable
for evaluation use during system development and
for small-quantity production.
64 pin QFP (Plastic)
64 pin LQFP (Plastic)
Features
A wide instruction set (213 instructions) which covers various types of data
— 16-bit operation/multiplication and division/Boolean bit operation instructions
Minimum instruction cycle
250ns at 16MHz (4.5 to 5.5V)
333ns at 12MHz (3.0 to 5.5V)
Incorporated PROM capacity 24K bytes
Incorporated RAM capacity
832 bytes
Peripheral functions
— A/D converter
8-bit, 8-channel, successive approximation system
(Conversion time: 20µs at 16MHz)
— Serial interface
Incorporated buffer RAM (1 to 32 bytes auto transfer), 1 channel
Incorporated 8-bit and 8-stage FIFO
(1 to 8 bytes auto transfer), 1 channel
— Timer
8-bit timer, 8-bit timer/counter, 19-bit time base timer
— PWM output
12 bits, 2 channels
Interruption
10 factors, 10 vectors, multi-interruption possible
Standby mode
Sleep/stop
Package
64-pin plastic QFP/LQFP
Structure
Silicon gate CMOS IC
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E94X40A69-PS

1 page




CXP811P24 pdf
CXP811P24
Pin Description
Symbol
PA0 to PA7
PB0 to PB7
PC0 to PC7
PD0 to PD7
PE0/INT0
PE1/EC/
INT2
PE2/PWM0
PE3/PWM1
PF0/AN0
to
PF3/AN3
PF4/AN4
to
PF7/AN7
SCK0
SO0
SI0
CS0
PG3/TO
PG4
PG5/SCK1
PG6/SO1
PG7/SI1/
INT1
EXTAL
XTAL
RST
I/O Description
Output
(Port A)
8-bit output port.
(8 pins)
Output
(Port B)
8-bit output port.
(8 pins)
(Port C)
I/O 8-bit I/O port. I/O can be set in a unit of single bits.
(8 pins)
(Port D)
I/O
8-bit I/O port. I/O and function as standby release input can be set in a unit
of single bits.
(8 pins)
Input/Input
(Port E)
Input to request external interruption.
Active at the falling edge. (2 pins)
Input/Input/
Input
4-bit port.
Lower 2 bits are for input;
upper 2 bits are for
output.
External event
input for
timer/counter.
Output/Output (4 pins)
Output/Output
12-bit PWM output. (2 pins)
Input/Input
Output/Input
(Port F)
8-bit port. Lower 4 bits are for input; upper
4 bits are for output.
Lower 4 bits also serve as standby release
input.
(8 pins)
Analog input to A/D
converter. (8 pins)
I/O Serial clock (CH0) I/O.
Output
Serial data (CH0) output.
Input
Serial data (CH0) input.
Input
Serial intreface (CH0) chip select input.
Output/Output
Output
(Port G)
5-bit port. Lower 2 bits
I/O/I/O
are for output; upper
I/O/Output
3 bits are for I/O.
I/O port can be set in a
I/O/Input/
Input
unit of single bits.
(5 pins)
Timer/counter rectangular wave output.
Serial clock (CH1) I/O.
Serial data (CH1) output.
Serial data (CH1)
input.
Input to request external
interruption. Active at the
falling edge.
Input
Output
Connects a crystal oscillator for system clock. When supplying the
external clock, input the external clock to EXTAL pin and input opposite
phase clock to XTAL pin.
I/O
System reset; active at Low level. RST pin is I/O pin, which outputs Low level
by incorporated power-on reset function when power turns on.
–5–

5 Page





CXP811P24 arduino
CXP811P24
Absolute Maximum Ratings
(Vss = 0V reference)
Item
Symbol
Rating
Unit
Remarks
Supply voltage
Input voltage
Output voltage
High level output current
High level total output current
Low level output current
Low level total output current
Operating temperature
Storage temperature
Allowable power dissipation
VDD
Vpp
AVDD
AVSS
AVREF
VIN
VOUT
IOH
IOH
IOL
IOL
Topr
Tstg
PD
–0.3 to +7.0
–0.3 to +13.0
AVSS to +7.0
–0.3 to +0.3
AVSS to +7.0
–0.3 to +7.01
–0.3 to +7.01
–5
–50
15
130
–10 to +75
–55 to +150
600
380
V
V Incorporated PROM
V
V
V
V
V
mA
mA Total of output pins
mA
mA Total of output pins
°C
°C
mW QFP-64P-L01
mW LQFP-64P-L01
1 VIN and VOUT should not exceed VDD + 0.3V. (CS0 and SI0 excluded.)
Note) Usage exceeding absolute maximum ratings may permanently impair the LSI. Normal operation should
be conducted under the recommended operating conditions. Exceeding those conditions may adversely
affect the reliability of the LSI.
– 11 –

11 Page







PáginasTotal 27 Páginas
PDF Descargar[ Datasheet CXP811P24.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
CXP811P24CMOS 8-bit Single Chip MicrocomputerSony Corporation
Sony Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar