|
|
PDF HMC422MS8 Data sheet ( Hoja de datos )
| Número de pieza | HMC422MS8 | |
| Descripción | GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER/ 1.2 - 2.5 GHz | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC422MS8 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v01.0603 HMC422MS8
MICROWAVE CORPORATION
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.2 - 2.5 GHz
12
Typical Applications
The HMC422MS8 is ideal for:
• MMDS & ISM
• Wireless Local Loop
• WirelessLAN
• Cellular Infrastructure
Functional Diagram
Features
Integrated LO Amplifier w/ Pdiss <100 mW
Conversion Loss / Noise Figure: 8.0 dB
Low LO Drive: 0 dBm
Input IP3: +15 dBm
Single Positive Supply: 3V, 30 mA
General Description
The HMC422MS8 is a double balanced mixer
IC with an integrated LO amplifier. This mixer
can operate as an upconverter or downconverter
between 1.2 GHz and 2.5 GHz. With the inte-
grated LO amplifier, the mixer requires an LO
drive level of only 0 dBm, and requires only 30mA
from a single positive +3V rail. The mixer has 8 dB
of conversion loss, an input P1dB of +8 dBm and
an input third order intercept point of +15 dBm at
2 GHz.
Electrical Specifications, TA = +25° C
Parameter
IF = 100 MHz
LO = 0 dBm & Vdd = 3V
Min. Typ. Max.
Frequency Range, RF & LO
1.2 - 2.5
Frequency Range, IF
DC - 1.0
Conversion Loss
8 10.5
Noise Figure (SSB)
8 10.5
LO to RF Isolation
23 30
LO to IF Isolation
9 15 - 20
RF to IF Isolation
9 15 - 20
IP3 (Input)
12 15
1 dB Compression (Input)
58
Supply Current (Idd)
30
* Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz.
Units
GHz
GHz
dB
dB
dB
dB
dB
dBm
dBm
mA
12 - 258
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
1 page  
MICROWAVE CORPORATION
v01.0603
HMC422MS8
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.2 - 2.5 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1
LO Port
This pin is AC coupled and matched to 50 Ohm from
1.2 - 2.5 GHz.
12
2, 3, 6, 7
GND
Pins must connect to RF ground.
4
Vdd
Power supply for the LO Amplifier. One external RF bypass
capacitor (10,000 pF) is required.
This pin is DC coupled. For applications not requiring operation
to DC, this port should be DC blocked externally using a series
5
IF Port
capacitor whose value has been chosen to pass the neces-
sary IF frequency range. For operation to DC, this pin must not
source/sink more than 10 mA of current or die non-function and
possible die failure will result.
8
RF Port
This pin is DC coupled and matched to 50 Ohm from
1.2 - 2.5 GHz.
12 - 262
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC422MS8.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC422MS8 | GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER/ 1.2 - 2.5 GHz | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |