|
|
PDF AS8202 Data sheet ( Hoja de datos )
| Número de pieza | AS8202 | |
| Descripción | TTP/C-C2 Communication Controller | |
| Fabricantes | austriamicrosystems AG | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AS8202 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
AS8202
TTP/C-C2 Communication
Controller
Preliminary Data Sheet
Rev. 1.0, October 2000
1 page  
TTP/C-C2 Communication Controller – Preliminary Data Sheet
AS8202
Electrical Specifications
Absolute Maximum Ratings (Non Operating)
SYMBOL
VDD
Vin
Iin
Tstrg
Tsold
tsold
H
ESD
PARAMETER
DC Supply Voltage
Input Voltage on any Pin
Input Current on any Pin
Storage Temperature
Soldering Temperature
Soldering Time
Humidity
Electrostatic Discharge
MIN
-0.3 V
- 0.3 V
-100 mA
-55 oC
5%
1000 V
MAX
5.0 V
VDD + 0.3 V
100 mA
150 oC
260 oC
10 sec
85 %
NOTE
25°C
1)
Reflow and Wave
HBM: R = 1.5 k , C = 100 pF
1. 300 oC all ceramic packages and DIL plastic packages, 260 oC for surface mounting plastic packages
Note: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only and functional operation of the device at these or any other
conditions above those indicated in the operational sections of this specification is not implied. Exposure
to absolute maximum rating conditions for extended periods may effect device reliability (e.g. hot carrier
degradation).
Recommended Operating Conditions
PARAMETER
DC Supply Voltage
Circuit Ground
Static Supply Current
Operating Supply Current
SYMBOL MIN
VDD
3.0 V
VSS
0.0 V
IDDS
----
IDD ----
TYP
3.3 V
0.0 V
700 µA
45 mA
MAX
3.6 V
0.0 V
800 µA
56 mA
NOTE
1)
2)
fCLK = 40 MHz, VDD = 3.6 V
3)
Main clock frequency
Bus Guardian clock
frequency
Ambient Temperature
CLK
CLK2
Ta
5 MHz
4 MHz
-40 oC
20 MHz oscillator pins xin0, xout0
16 MHz oscillatpr pins xin1, xout1
+125 oC 1)
1. The input and output parameter values in this table are directly related to ambient temperature and DC supply
voltage. A temperature range other Tamin to Tamax or a supply voltage range other than VDDmin to VDDmax will
affect these values and must be evaluated extra.
2. Static supply current IDDS is exclusive of input/output drive requirements and is measured at maximum VDD
with the clocks stopped and all inputs tied to VDD or VSS, configured to draw minimum current.
3. Operating current is exclusive of input/output drive requirements and is measured at maximum VDD and
maximum clock frequency 40 MHz.
DC Characteristics and Voltage Levels
CMOS I/O levels for specified voltage and temperature range unless otherwise noted.
Inputs Pins
Pin Name
All inputs and IO pins
without pull-up/down
Inputs with pull-up
Inputs with pull-down
Vil
max
30%
VDD
30%
VDD
30%
VDD
Vih
min
70%
VDD
70%
VDD
70%
VDD
Iil (1)
min
NA
-50
µA
NA
max
-1.0
µA
-160
µA
NA
Iih(2)
min
NA
NA
max
1.0
µA
NA
30 160
µA µA
NOTE
CMOS input (3)
CMOS with
pull up (3)
CMOS with
pull down (3)
1. Iil ist tested at VDDmax and Vin = 0
2. Iih ist tested at VDDmax and Vin = VDDmax
3. CMOS input levels are in percentage of VDD, for pull-up/down refer to pin description above.
Rev. 1.0, October 2000
Page 5 of 5
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet AS8202.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AS8201 | TTP/C-C1 Communications Controller | austriamicrosystems AG |
| AS8202 | TTP/C-C2 Communication Controller | austriamicrosystems AG |
| AS8202B | TTP-C2NF Communication Controller |  ams |
| AS8202NF | TTP-C2NF Communication Controller | austriamicrosystems AG |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |