|
|
Número de pieza | AMC1604A | |
Descripción | LCD MODULE | |
Fabricantes | ETC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AMC1604A (archivo pdf) en la parte inferior de esta página. Total 23 Páginas | ||
No Preview Available ! SPECIFICATIONS
FOR LCD MODULE
CUSTOMER
CUSTOMER PART NO.
ACMMI PART NO.
DESCRIPTION
APPROVED BY
DATE
OD-AMC1604A SERIES
PAGE 1 OF 23
1 page 2. Precautions in use of LCD Modules
(1)Avoid applying excessive shocks to the module or making any alterations or
modifications to it.
(2)Don’t make extra holes on the printed circuit board, modify its shape or change the
components of LCD module.
(3)Don’t disassemble the LCM.
(4)Don’t operate it above the absolute maximum rating.
(5)Don’t drop, bend or twist LCM.
(6)Soldering: only to the I/O terminals.
(7)Storage: please storage in anti-static electricity container and clean environment.
3. General Specification
Item
Number of Characters
Module dimension(No Backlight )
Module dimension(With LED
Backlight )
View area
Active area
Dot size
Dot pitch
Character size
Character pitch
LCD type
Duty
View direction
Backlight Type
Dimension
16 characters x 4 Lines
87.0 x 60.0 x 9.0(MAX)
87.0 x 60.0 x 14.0(MAX)
61.8 x 25.2
56.2 x 20.8
0.55x 0.55
0.60 x 0.60
2.95 x 4.75
3.55 x 5.35
STN
1/16
6 o’clock or 12 o’clock
None, YELLOW-GREEN,WHITE
Unit
-
mm
mm
mm
mm
mm
mm
mm
mm
PAGE 5 OF 23
5 Page 10. Function Description
The LCD display Module is built in a LSI controller, the controller has two 8-bit registers,
an instruction register (IR) and a data register (DR).
The IR stores instruction codes, such as display clear and cursor shift, and address
information for display data RAM (DDRAM) and character generator (CGRAM). The IR
can only be written from the MPU. The DR temporarily stores data to be written or read
from DDRAM or CGRAM. When address information is written into the IR, then data is
stored into the DR from DDRAM or CGRAM. By the register selector (RS) signal,
these two registers can be selected.
RS R/W
Operation
0 0 IR write as an internal operation (display clear, etc.)
0 1 Read busy flag (DB7) and address counter (DB0 to DB7)
1 0 Write data to DDRAM or CGRAM (DR to DDRAM or CGRAM)
1 1 Read data from DDRAM or CGRAM (DDRAM or CGRAM to DR)
Busy Flag (BF)
When the busy flag is 1, the controller LSI is in the internal operation mode, and the next
instruction will not be accepted. When RS=0 and R/W=1, the busy flag is output to
DB7. The next instruction must be written after ensuring that the busy flag is 0.
Address Counter (AC)
The address counter (AC) assigns addresses to both DDRAM and CGRAM
Display Data RAM (DDRAM)
This DDRAM is used to store the display data represented in 8-bit character codes.
extended capacity is 80×8 bits or 80 characters. Below figure is the relationships
between DDRAM addresses and positions on the liquid crystal display.
Its
High bits
Low bits
AC
(hexadecimal)
AC6 AC5 AC4 AC3 AC2 AC1 AC0
Example: DDRAM addresses 4E
1001110
PAGE 11 OF 23
11 Page |
Páginas | Total 23 Páginas | |
PDF Descargar | [ Datasheet AMC1604A.PDF ] |
Número de pieza | Descripción | Fabricantes |
AMC1604A | LCD MODULE | ETC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |