|
|
PDF PIC18F46J53 Data sheet ( Hoja de datos )
| Número de pieza | PIC18F46J53 | |
| Descripción | High-Performance USB Microcontrollers | |
| Fabricantes | Microchip | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PIC18F46J53 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
PIC18F47J53 Family
Data Sheet
28/44-Pin, High-Performance
USB Microcontrollers
with nanoWatt XLP Technology
2010 Microchip Technology Inc.
Preliminary
DS39964B
1 page  
Pin Diagrams
28-Pin QFN
PIC18F47J53 FAMILY
www.DataSheet4U.com
RA2/AN2/C2INB/C1IND/C3INB/VREF-/CVREF
RA3/AN3/C1INB/VREF+
VDDCORE/VCAP
RA5/AN4/C1INC/SS1/HLVDIN/RCV/RP2
VSS1
OSC1/CLKI/RA7
OSC2/CLKO/RA6
28 27 26 25 24 23 22
1 21
2 20
3
4
PIC18F2XJ53
19
18
5 17
6 16
7 15
8 9 10 11 12 13 14
RB3/AN9/C3INA/CTED2/VPO/RP6
RB2/AN8/C2INC/CTED1/VMO/REFO/RP5
RB1/AN10/C3INC/RTCC/RP4
RB0/AN12/C3IND/INT0/RP3
VDD
VSS2
RC7/CCP10/RX1/DT1/SDO1/RP18
28-Pin SPDIP/SOIC/SSOP
MCLR
RA0/AN0/C1INA/ULPWU/RP0
RA1/AN1/C2INA/VBG/RP1
RA2/AN2/C2INB/C1IND/C3INB/VREF-/CVREF
RA3/AN3/C1INB/VREF+
VDDCORE/VCAP
RA5/AN4/C1INC/SS1/HLVDIN/RCV/RP2
VSS1
OSC1/CLKI/RA7
OSC2/CLKO/RA6
RC0/T1OSO/T1CKI/RP11
RC1/CCP8/T1OSI/UOE/RP12
RC2/AN11/C2IND/CTPLS/RP13
VUSB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
28 RB7/CCP7/KBI3/PGD/RP10
27 RB6/CCP6/KBI2/PGC/RP9
26 RB5/CCP5/KBI1/SDI1/SDA1/RP8
25 RB4/CCP4/KBI0/SCK1/SCL1/RP7
24 RB3/AN9/C3INA/CTED2/VPO/RP6
23 RB2/AN8/C2INC/CTED1/VMO/REFO/RP5
22 RB1/AN10/C3INC/RTCC/RP4
21 RB0/AN12/C3IND/INT0/RP3
20 VDD
19 VSS2
18 RC7/CCP10/RX1/DT1/SDO1/RP18
17 RC6/CCP9/TX1/CK1/RP17
16 RC5/D+/VP
15 RC4/D-/VM
Legend:
Note:
Shaded pins are 5.5V tolerant.
RPn represents remappable pins. Some input and output functions are routed through the Peripheral Pin
Select (PPS) module and can be dynamically assigned to any of the RPn pins. For a list of the input and
output functions, see Table 10-13 and Table 10-14, respectively. For details on configuring the PPS mod-
ule, see Section 10.7 “Peripheral Pin Select (PPS)”.
For the QFN package, it is recommended that the bottom pad be connected to VSS.
2010 Microchip Technology Inc.
Preliminary
DS39964B-page 5
5 Page 
1.0 DEVICE OVERVIEW
This document contains device-specific information for
the following devices:
• PIC18F26J53
• PIC18F27J53
• PIC18F46J53
• PIC18F47J53
• PIC18LF26J53
• PIC18LF27J53
• PIC18LF46J53
• PIC18LF47J53
This family introduces a new line of low-voltage
Universal Serial Bus (USB) microcontrollers with the
main traditional advantage of all PIC18 microcontrollers,
namely, high computational performance and a rich
feature set at an extremely competitive price point.
These features make the PIC18F47J53 family a logical
choice for many high-performance applications, where
cost is a primary consideration.
1.1 Core Features
1.1.1 nanoWatt XLP TECHNOLOGY
All of the devices in the PIC18F47J53 family incorpo-
rate a range of features that can significantly reduce
power consumption during operation. Key features are:
• Alternate Run Modes: By clocking the controller
from the Timer1 source or the internal RC
oscillator, power consumption during code
execution can be reduced by as much as 90%.
• Multiple Idle Modes: The controller can also run
with its CPU core disabled but the peripherals still
active. In these states, power consumption can be
reduced even further, to as little as 4% of normal
operational requirements.
• On-the-Fly Mode Switching: The
power-managed modes are invoked by user code
during operation, allowing the users to incorporate
power-saving ideas into their application’s
software design.
• Deep Sleep: The 2.5V internal core voltage regu-
lator on F parts can be shutdown to cut power
consumption to as low as 15 nA (typical). Certain
features can remain operating during Deep Sleep,
such as the Real-Time Clock Calendar.
• Ultra Low Power Wake-Up: Waking from Sleep
or Deep Sleep modes after a period of time can
be done without an oscillator/clock source, saving
power for applications requiring periodic activity.
1.1.2 UNIVERSAL SERIAL BUS (USB)
Devices in the PIC18F47J53 family incorporate a
fully-featured USB communications module with a
built-in transceiver that is compliant with the USB
Specification Revision 2.0. The module supports both
low-speed and full-speed communication for all
supported data transfer types.
PIC18F47J53 FAMILY
www.DataSheet4U.com
1.1.3
OSCILLATOR OPTIONS AND
FEATURES
All of the devices in the PIC18F47J53 family offer five
different oscillator options, allowing users a range of
choices in developing application hardware. These
include:
• Two Crystal modes, using crystals or ceramic
resonators.
• Two External Clock modes, offering the option of
a divide-by-4 clock output.
• An internal oscillator block, which provides an
8 MHz clock and an INTRC source (approxi-
mately 31 kHz, stable over temperature and VDD),
as well as a range of six user-selectable clock
frequencies, between 125 kHz to 4 MHz, for a
total of eight clock frequencies. This option frees
an oscillator pin for use as an additional general
purpose I/O.
• A Phase Lock Loop (PLL) frequency multiplier
available to the high-speed crystal, and external
and internal oscillators, providing a clock speed
up to 48 MHz.
• Dual clock operation, allowing the USB module to
run from a high-frequency oscillator while the rest
of the microcontroller is clocked at a different
frequency.
The internal oscillator block provides a stable reference
source that gives the PIC18F47J53 family additional
features for robust operation:
• Fail-Safe Clock Monitor: This option constantly
monitors the main clock source against a reference
signal provided by the internal oscillator. If a clock
failure occurs, the controller is switched to the
internal oscillator, allowing for continued low-speed
operation or a safe application shutdown.
• Two-Speed Start-up: This option allows the
internal oscillator to serve as the clock source
from Power-on Reset (POR), or wake-up from
Sleep mode, until the primary clock source is
available.
1.1.4 EXPANDED MEMORY
The PIC18F47J53 family provides ample room for
application code, from 64 Kbytes to 128 Kbytes of code
space. The Flash cells for program memory are rated
to last in excess of 10000 erase/write cycles. Data
retention without refresh is conservatively estimated to
be greater than 20 years.
The Flash program memory is readable and writable
during normal operation. The PIC18F47J53 family also
provides plenty of room for dynamic application data
with up to 3.8 Kbytes of data RAM.
2010 Microchip Technology Inc.
Preliminary
DS39964B-page 11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet PIC18F46J53.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PIC18F46J50 | PIC18F46J50 Family |  Microchip Technology |
| PIC18F46J53 | High-Performance USB Microcontrollers | Microchip |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |