|
|
Número de pieza | MB95F168JA | |
Descripción | 8-bit Microcontrollers | |
Fabricantes | Fujitsu | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MB95F168JA (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! FUJITSU SEMICONDUCTOR
DATA SHEET
DS07–12624–4E
8-bit Microcontrollers
CMOS
F2MC-8FX MB95160MA Series
MB95168MA/F168MA/F168NA/F168JA/
MB95FV100D-103
■ DESCRIPTION
The MB95160MA series is general-purpose, single-chip microcontrollers. In addition to a compact instruction
set, the microcontrollers contain a variety of peripheral functions.
Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
■ FEATURE
• F2MC-8FX CPU core
Instruction set optimized for controllers
• Multiplication and division instructions
• 16-bit arithmetic operations
• Bit test branch instruction
• Bit manipulation instructions etc.
• Clock
• Main clock
• Main PLL clock
• Sub clock
• Sub PLL clock
(Continued)
For the information for microcontroller supports, see the following web site.
This web site includes the "Customer Design Review Supplement" which provides the latest cautions
on system development and the minimal requirements to be checked to prevent problems before the
system development.
http://edevice.fujitsu.com/micom/en-support/
Copyright©2008-2011 FUJITSU SEMICONDUCTOR LIMITED All rights reserved
2011.1
1 page MB95160MA Series
■ OSCILLATION STABILIZATION WAIT TIME
The initial value of the main clock oscillation stabilization wait time is fixed to the maximum value. The
maximum value is shown as follows.
Oscillation stabilization wait time
Remarks
(214-2) /FCH
Approx. 4.10 ms (at main oscillation clock 4 MHz)
■ PACKAGES AND CORRESPONDING PRODUCTS
Package
Part number
FPT-64P-M23
FPT-64P-M24
BGA-224P-M08
: Available
: Unavailable
MB95168MA
MB95F168MA/
F168NA/F168JA
MB95FV100D-103
DS07–12624–4E
5
5 Page MB95160MA Series
■ I/O CIRCUIT TYPE
Type
A
X1 (X1A)
X0 (X0A)
Standby control
B
Circuit
N-ch
Clock input
Remarks
• Oscillation circuit
• High-speed side
Feedback resistance : approx. 1 MΩ
• Low-speed side
Feedback resistance : approx. 10 MΩ
Mode input
• Only for input
• Hysteresis input
B’
Reset input
Reset output
N-ch
F
P-ch Digital output
Digital output
N-ch
Analog input
LCD output
A/D control
LCD control
Standby control
External interrupt
control
G
R
P-ch
P-ch
N-ch
Standby control
Hysteresis input
Automotive input
Pull-up control
Digital output
Digital output
CMOS input
Hysteresis input
Automotive input
• Hysteresis input
• Reset output
• CMOS output
• LCD output
• Hysteresis input
• Analog input
• Automotive input
• CMOS output
• CMOS input
• Hysteresis input
• With pull-up control
• Automotive input
(Continued)
DS07–12624–4E
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet MB95F168JA.PDF ] |
Número de pieza | Descripción | Fabricantes |
MB95F168J | 8-bit Microcontroller | Fujitsu Media Devices |
MB95F168JA | 8-bit Microcontrollers | Fujitsu |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |