DataSheet.es    


PDF PM9110BF Data sheet ( Hoja de datos )

Número de pieza PM9110BF
Descripción MONOCHIP THREE PHASE BIDIRECTIONAL KILOWATT HOUR METERING MODULE
Fabricantes Sames 
Logotipo Sames Logotipo



Hay una vista previa y un enlace de descarga de PM9110BF (archivo pdf) en la parte inferior de esta página.


Total 14 Páginas

No Preview Available ! PM9110BF Hoja de datos, Descripción, Manual

sames
SA9110A APPLICATION NOTE
PM9110BF
MONOCHIP THREE PHASE BIDIRECTIONAL
KILOWATT HOUR METERING MODULE
FEATURES
! Performs bidirectional energy metering
and includes a 7 digit LCD driver with
announciators
! 4 externally selectable on-chip tariff reg-
isters
! An additional total energy register
! Meets the accuracy requirements for
Class 1 AC Watt hour meters
! Optical interface for electronic reading
according to IEC1107 Mode D
! Pulse output for calibration
! Total power consumption rating below
100mW
! Uses current transformers for current
sensing
! Operates over a wide temperature range
! Demonstration software included
DESCRIPTION
The SAMES monochip three phase bidirectional kilowatt hour metering module, the
PM9110BF, provides all the required metering functions including energy measure-
ment, a 7 digit LCD driver, a tariff selection facility, an optical port as well as a pulse
output for calibration purposes.
Energy consumption is determined by the power measurement being integrated over
time.
This method of calculation takes the power factor into account.
This application utilises the SAMES SA9110AFA monochip three phase bidirectional
kilowatt hour metering IC for energy measurement.
PM9110BFX
PDS038-SA9110A-001 REV. 2
1/14
28-06-00

1 page




PM9110BF pdf
PM9110BF
PM9110BF
Pin Description
1 GND
2 PB
3 PCLK
4 PDTA
5 PGM
PC Parallel Connectors (Suggested)
Pin Description
18 GND
2 D1
4 D3
5 D4
3 D2
Note: The recommended connections above are applicable for the demonstration
software provided with the PM9110BF.
6. Optical Port
The optical port has been designed to meet the IEC1107 Mode D specification. This
facillity offers a pulse output as well as a serial data meter reading facility.
Three types of interfacing elements from the PM9110BF are available:
a) Infra-red optical port
b) Red LED
c) Opto-coupler
In order to maximise the intensity of the element, it is suggested that only one of
the outputs be used at any one time.
Jumper
J5
J6
J7
Element
Opto Coupler
Infra Red LED
Red LED
7. Liquid Crystal Display (LCD)
The PM9110BF has a LCD comprising of seven digits with announciatiors.
To cater for compatibility with future devices four jumpers are provided for
backplane driving configurations. The PM9110BF boards are shipped to the
customer with jumpers in a default configuration.
8. Tariff, Scroll and Reset Functions
Tariff Selection
A dual DIP switch provides the user with the facility to set the active tariff register
in which consumption will be accumulated.
The active register is indicated on the LCD.
sames
5/14

5 Page





PM9110BF arduino
PM9110BF
Parts List for Application circuit: Figure 2 (continued)
Item Symbol Description
44 C7 Capacitor, ceramic, 2.2nF
45 C8 Capacitor, ceramic, 3.3nF
46 C9 Capacitor, ceramic, 560pF
47 C10 Capacitor, ceramic, 560pF
48 C11 Capacitor, ceramic, 560pF
49 C12 Capacitor, 100µF, 16V
50 C13 Capacitor, 100nF
51 C14 Capacitor, 100nF
52 C15 Capacitor, 100µF, 16V
53 C16 Capacitor, 820nF
54 BAT Battery, 1.2V
55 IR LED Infrared light emitting diode
56 RED LED Red light emitting diode
57 Q1 Photo transistor
58 D1 Diode, 1N4148
59 D2 Diode, 1N4148
60 SCROLL NO, push button
61 RESET NO, push button
62 TARIFF DIP switch, 2 pole
63 LCD OEL-7678*
Detail
Note 3
Note 3
Note 1: Resistor (R8, R9, R10, R11, R12 and R13) values are dependant upon the selected
values of the current transformer termination resistors R18, R19 and R20
Note 2: Capacitor values may be selected to compensate for phase errors caused by
the current transformers
Note 3: Capacitor (C13) to be positioned as close to Supply Pins (VDD & VSS) of IC-1, as
possible
Note 4: See the table below detailing the component values for the selected voltage
standard
*The LCD display is available from:
JEBON CORPORATION
Unit 709, Poongsan Factoria Town,
1141-2, Baegsok-Dong, Ilsan-District,
Koyangcity, Kyonggi-Do, 411-360, Korea
Tel: +82-31-902-9161 (12 lines)
Fax: +82-31-902-7775/7776
Web site: http://www.jebon.com
sames
11/14

11 Page







PáginasTotal 14 Páginas
PDF Descargar[ Datasheet PM9110BF.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
PM9110BFMONOCHIP THREE PHASE BIDIRECTIONAL KILOWATT HOUR METERING MODULESames
Sames

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar