|
|
PDF LMP8601 Data sheet ( Hoja de datos )
| Número de pieza | LMP8601 | |
| Descripción | Bidirectional Precision Current Sensing Amplifier | |
| Fabricantes | National Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LMP8601 (archivo pdf) en la parte inferior de esta página. Total 22 Páginas | ||
|
No Preview Available !
LMP8601/LMP8601Q
July 16, 2009
60V Common Mode, Bidirectional Precision Current
Sensing Amplifier
General Description
The LMP8601 and LMP8601Q are fixed 20x gain precision
amplifiers. The part will amplify and filter small differential sig-
nals in the presence of high common mode voltages. The
input common mode voltage range is –22V to +60V when op-
erating from a single 5V supply. With 3.3V supply, the input
common mode voltage range is from –4V to +27V. The
LMP8601 and LMP8601Q are members of the Linear Mono-
lithic Precision (LMP®) family and are ideal parts for unidirec-
tional and bidirectional current sensing applications. All
parameter values of the part that are shown in the tables are
100% tested and all bold values are also 100% tested over
temperature.
The part has a precise gain of 20x which is adequate in most
targeted applications to drive an ADC to its full scale value.
The fixed gain is achieved in two separate stages, a pream-
plifier with a gain of 10x and an output stage buffer amplifier
with a gain of 2x. The connection between the two stages of
the signal path is brought out on two pins to enable the pos-
sibility to create an additional filter network around the output
buffer amplifier. These pins can also be used for alternative
configurations with different gain as described in the applica-
tions section .
The mid-rail offset adjustment pin enables the user to use
these devices for bidirectional single supply voltage current
sensing. The output signal is bidirectional and mid-rail refer-
enced when this pin is connected to the positive supply rail.
With the offset pin connected to ground, the output signal is
unidirectional and ground-referenced .
The LMP8601Q incorporates enhanced manufacturing and
support processes for the automotive market, including defect
detection methodologies. Reliability qualification is compliant
with the requirements and temperature grades defined in the
AEC Q100 standard.
Features
Unless otherwise noted, typical values at TA = 25°C,
VS = 5.0V, Gain = 20x
■ TCVOS
■ CMRR
10μV/°C max
90 dB min
■ Input offset voltage
1 mV max
■ CMVR at VS = 3.3V
■ CMVR at VS = 5.0V
■ Operating ambient temperature range
−4V to 27V
−22V to 60V
−40°C to 125°C
■ LMP8601Q available in Automotive AEC-Q100 Grade 1
qualified version
■ Single supply bidirectional operation
■ All Min / Max limits 100% tested
Applications
■ High side and low side driver configuration current sensing
■ Bidirectional current measurement
■ Current loop to voltage conversion
■ Automotive fuel injection control
■ Transmission control
■ Power steering
■ Battery management systems
Typical Applications
LMP™ is a trademark of National Semiconductor Corporation.
© 2009 National Semiconductor Corporation 201571
20157101
www.national.com
1 page  
Block Diagram
Connection Diagram
K2 = 2
8-Pin SOIC
20157105
Top View
20157102
5 www.national.com
5 Page 
TCVOS Distribution
Gain Drift Distribution
20157136
Gain error Distribution at VS = 3.3V
20157137
Gain error Distribution at VS = 5V
20157138
CMRR Distribution at VS = 3.3V
20157139
CMRR Distribution at VS = 5V
20157132
11
20157133
www.national.com
11 Page | ||
| Páginas | Total 22 Páginas | |
| PDF Descargar | [ Datasheet LMP8601.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LMP8601 | LMP8601 LMP8601-Q1 60-V Common-Mode Bidirectional Precision Current-Sensing Amplifier (Rev. G) |  Texas Instruments |
| LMP8601 | Bidirectional Precision Current Sensing Amplifier | National Semiconductor |
| LMP8601-Q1 | LMP8601 LMP8601-Q1 60-V Common-Mode Bidirectional Precision Current-Sensing Amplifier (Rev. G) | Texas Instruments |
| LMP8601Q | Bidirectional Precision Current Sensing Amplifier | National Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |