|
|
PDF SPF0004 Data sheet ( Hoja de datos )
| Número de pieza | SPF0004 | |
| Descripción | Dual N-channel Power MOSFET | |
| Fabricantes | Sanken | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SPF0004 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
VDSS = 275 V, RDS(ON) = 0.26 Ω
Dual N-channel Power MOSFET
SPF0004
Data Sheet
Description
SPF0004 includes two N-channel power MOSFETs
with zener diode for ESD protection. The package of
SPF0004 isolates each MOSFET, and has heatsink
connected to each drain.
Features
● Automotive Qualified
● Low On Resistance
● ESD Protection Zener on Gate
● 100% Avalanche Tested
● Compliant with RoHS directive
● VDSS ------------------------------------ 275 V (ID = 100 μA)
● ID --------------------------------------------------------- ± 6 A
● RDS(ON) ---------------0.26 Ω max. (ID = 6 A, VGS = 10 V)
● trr ------------------------------------------------ 117 ns (typ.)
Package
HSOP20
(1)
(10)
(20) (20)
(F1)
(1)
(11) (11)
(F2)
(10)
Not to scale
Applications
● DC/DC Converter
● Other Switched-mode Power Supply
Internal Schematic Diagram
G1 D1 G2 D2
(17, 18, 19) (F1) (12, 13, 14) (F2)
S1
(2, 3, 4)
D1: Drain1
S1: Source1
G1: Gate1
D2: Drain2
S2 S2: Source2
(7, 8, 9) G2: Gate2
SPF0004-DSE Rev.1.0
SANKEN ELCTRIC CO.,LTD.
Sep. 06, 2016
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
1
1 page  
SPF0004
RG
VGS
0V
Pulse width = 10 μs
Duty cycle ≤ 1 %
(a) Test Circuit
RL
VGS
VDS
ID
VDD
0
VDS
0
td(on) tr
td(off) tf
ton
(b) Waveform
toff
Figure 4 Switching Time
90%
10%
90%
10%
SPF0004-DSE Rev.1.0
SANKEN ELCTRIC CO.,LTD.
Sep. 06, 2016
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
5
5 Page 
SPF0004
Important Notes
● All data, illustrations, graphs, tables and any other information included in this document as to Sanken‟s products listed herein (the
“Sanken Products”) are current as of the date this document is issued. All contents in this document are subject to any change
without notice due to improvement of the Sanken Products, etc. Please make sure to confirm with a Sanken sales representative
that the contents set forth in this document reflect the latest revisions before use.
● The Sanken Products are intended for use as components of electronic equipment or apparatus (transportation equipment and its
control systems, home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Prior to use of the
Sanken Products, please put your signature, or affix your name and seal, on the specification documents of the Sanken Products
and return them to Sanken. If considering use of the Sanken Products for any applications that require higher reliability (traffic
signal control systems or equipment, disaster/crime alarm systems, etc.), you must contact a Sanken sales representative to discuss
the suitability of such use and put your signature, or affix your name and seal, on the specification documents of the Sanken
Products and return them to Sanken, prior to the use of the Sanken Products. The Sanken Products are not intended for use in any
applications that require extremely high reliability such as: aerospace equipment; nuclear power control systems; and medical
equipment or systems, whose failure or malfunction may result in death or serious injury to people, i.e., medical devices in Class
III or a higher class as defined by relevant laws of Japan (collectively, the “Specific Applications”). Sanken assumes no liability or
responsibility whatsoever for any and all damages and losses that may be suffered by you, users or any third party, resulting from
the use of the Sanken Products in the Specific Applications or in manner not in compliance with the instructions set forth herein.
● In the event of using the Sanken Products by either (i) combining other products or materials therewith or (ii) physically,
chemically or otherwise processing or treating the same, you must duly consider all possible risks that may result from all such
uses in advance and proceed therewith at your own responsibility.
● Although Sanken is making efforts to enhance the quality and reliability of its products, it is impossible to completely avoid the
occurrence of any failure or defect in semiconductor products at a certain rate. You must take, at your own responsibility,
preventative measures including using a sufficient safety design and confirming safety of any equipment or systems in/for which
the Sanken Products are used, upon due consideration of a failure occurrence rate or derating, etc., in order not to cause any human
injury or death, fire accident or social harm which may result from any failure or malfunction of the Sanken Products. Please refer
to the relevant specification documents and Sanken‟s official website in relation to derating.
● No anti-radioactive ray design has been adopted for the Sanken Products.
● No contents in this document can be transcribed or copied without Sanken‟s prior written consent.
● The circuit constant, operation examples, circuit examples, pattern layout examples, design examples, recommended examples, all
information and evaluation results based thereon, etc., described in this document are presented for the sole purpose of reference of
use of the Sanken Products and Sanken assumes no responsibility whatsoever for any and all damages and losses that may be
suffered by you, users or any third party, or any possible infringement of any and all property rights including intellectual property
rights and any other rights of you, users or any third party, resulting from the foregoing.
● All technical information described in this document (the “Technical Information”) is presented for the sole purpose of reference
of use of the Sanken Products and no license, express, implied or otherwise, is granted hereby under any intellectual property
rights or any other rights of Sanken.
● Unless otherwise agreed in writing between Sanken and you, Sanken makes no warranty of any kind, whether express or implied,
including, without limitation, any warranty (i) as to the quality or performance of the Sanken Products (such as implied warranty
of merchantability, or implied warranty of fitness for a particular purpose or special environment), (ii) that any Sanken Product is
delivered free of claims of third parties by way of infringement or the like, (iii) that may arise from course of performance, course
of dealing or usage of trade, and (iv) as to any information contained in this document (including its accuracy, usefulness, or
reliability).
● In the event of using the Sanken Products, you must use the same after carefully examining all applicable environmental laws and
regulations that regulate the inclusion or use of any particular controlled substances, including, but not limited to, the EU RoHS
Directive, so as to be in strict compliance with such applicable laws and regulations.
● You must not use the Sanken Products or the Technical Information for the purpose of any military applications or use, including
but not limited to the development of weapons of mass destruction. In the event of exporting the Sanken Products or the Technical
Information, or providing them for non-residents, you must comply with all applicable export control laws and regulations in each
country including the U.S. Export Administration Regulations (EAR) and the Foreign Exchange and Foreign Trade Act of Japan,
and follow the procedures required by such applicable laws and regulations.
● Sanken assumes no responsibility for any troubles, which may occur during the transportation of the Sanken Products including
the falling thereof, out of Sanken‟s distribution network.
● Although Sanken has prepared this document with its due care to pursue the accuracy thereof, Sanken does not warrant that it is
error free and Sanken assumes no liability whatsoever for any and all damages and losses which may be suffered by you resulting
from any possible errors or omissions in connection with the contents included herein.
● Please refer to the relevant specification documents in relation to particular precautions when using the Sanken Products, and refer
to our official website in relation to general instructions and directions for using the Sanken Products.
● All rights and title in and to any specific trademark or tradename belong to Sanken or such original right holder(s).
SPF0004-DSE Rev.1.0
SANKEN ELCTRIC CO.,LTD.
Sep. 06, 2016
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
DSGN-AEZ-16002
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet SPF0004.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SPF0001 | Surface Mount Power Transistor Array |  ETC |
| SPF0004 | Dual N-channel Power MOSFET | Sanken |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |