|
|
PDF SF480-3 Data sheet ( Hoja de datos )
| Número de pieza | SF480-3 | |
| Descripción | 480.00 MHz SAW Filter | |
| Fabricantes | Vanlong | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SF480-3 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
480.00 MHz SAW Filter
z Ideal for DBS Receivers, IF Filter
z Constant Group Delay
z Improved ESD capability by integrated shunt resistors
z Rugged, Hermetic, Low Profile TO-39 Package
SF480-3
Parameter
AC Voltage Between Any Two Pins
DC Voltage Between Any Two Pins
Operating Temperature Range
Storage Temperature Range
Absolute Maximum Rating (Ta=25°C)
Rating
VPP 5
VDC 0
TA -25 ~ +85
Tstg -40 ~ +85
Unit
V
V
°C
°C
Electronic Characteristics
Parameter
Sym Minimum
Center Frequency (25°C)
Between 3dB point
Tolerance from 480.00 MHz
fC NS
ΔfC -
Insertion Attenuation
α-
3dB Bandwidth
Relative Attenuation
BW3
25.60
466.50 MHz
-
493.50 MHz
αrel -
Lower Sidelobe
430.00 … 455.50 MHz
40
Upper Sidelobe
504.50 … 530.00 MHz
38
Reflected Wave Signal Suppression
0.15μs … 2.0μs after main pulse
- 40.0
Amplitude Ripple (p-p)
473.50 … 486.50 MHz
Δα -
Group Delay
480.00 MHz
τ-
Group Delay Ripple (p-p) 467.00 … 493.00 MHz
Δτ -
Temperature Coefficient of Frequency
FTC -
NS = Not Specified
Typical
480.00
-
22.5
26.60
3.0
3.2
46
43
46.0
0.6
227.5
8.5
-86
Maximum
NS
1.0
24.0
27.60
Unit
MHz
MHz
dB
MHz
4.6 dB
4.6 dB
- dB
- dB
- dB
1.0 dB
- ns
15.0 ns
- ppm/K
Notes:
1. The frequency fC is defined as the midpoint between the 3dB
frequencies.
2. Unless noted otherwise, all measurements are made with the filter
installed in the specified test fixture that is connected to a 50Ω test
system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted
for minimum insertion loss at the filter center frequency, fC. Note
that insertion loss, bandwidth, and passband shape are dependent
on the impedance matching component values and quality.
3. Unless noted otherwise, specifications apply over the entire
specified operating temperature range.
4. The specifications of this device are based on the test circuit
shown above and subject to change or obsolescence without
notice.
5. All equipment designs utilizing this product must be approved by
the appropriate government agency prior to manufacture or sale.
6. Our liability is only assumed for the Surface Acoustic Wave (SAW)
component(s) per se, not for applications, processes and circuits
implemented within components or assemblies.
7. For questions on technology, prices and delivery please contact
our sales offices or e-mail [email protected].
Phone: +86 (10) 5820-3910
Fax: +86 (10) 5820-3915
© 2003 by Vanlong Technology Co., Ltd.
Email: [email protected]
Web: http://www.vanlong.com
SF480-3
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet SF480-3.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SF480-3 | 480.00 MHz SAW Filter | Vanlong |
| SF480-L3R | 480.00 MHz SAW Filter | Vanlong |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |