|
|
PDF AUIRGC4066B Data sheet ( Hoja de datos )
| Número de pieza | AUIRGC4066B | |
| Descripción | Insulated Gate Bipolar Transistor | |
| Fabricantes | International Rectifier | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AUIRGC4066B (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
AUTOMOTIVE GRADE
AUIRGC4066B
Insulated Gate Bipolar Transistor
C
VCES = 600V
IC (Nominal) = 75A
tSC 5µs, TJ (max) = 175°C
VCE(on) typ = 1.7V @ IC= 75A
Applications
HEV Inverter
G
E
n-channel
Features
Low VCE(on) Trench IGBT Technology
Low Switching losses
5 µs Short Circuit Capability
Square RBSOA and 100% Clamp IL Tested
Tight parameter distribution
Lead-Free, RoHS Compliant
Automotive qualified
Benefits
High efficiency in a wide range of applications
Suitable for a wide range of switching frequencies due to Low
VCE(on) and Low switching losses
Rugged motor drive operation
Rugged hard switching operation
Simpler system level design
Environmentally friendlier
Qualification standard can be found at http://www.irf.com
Base part number
Package Type
AUIRGC4066B
Die on Film
Mechanical Parameter
Die Size
Emiter Pad Size (Included Gate Pad)
Gate Pad Size
Area Total / Active
Thickness
Wafer Size
Flat Position
Maximum-Possible Chips per Wafer
Passivation Frontside
Front Metal
Backside Metal
Die Bond
Reject Ink Dot Size
Recommended Storage Environment
Standard Pack
Form
Quantity
Wafer
1
Orderable part number
AUIRGC4066B
5.803 x 6.358
See Die Drawing
mm2
0.505 X 0.5015
36.89 / 28.11
mm2
70 µm
150 mm
0 Degrees
370 pcs
Silicon Nitride
Al (4µm)
Al (0.1µm), Ti (0.1µm), Ni (0.4µm), Ag (0.6µm)
Electrically conductive epoxy or solder
0.25mm min (black, center)
Store in original container, in dry Nitrogen,
<6 months at an ambient temperature of 23°C
Note:
This IR product is 100% tested at wafer level and is manufactured using established, mature and well characterized
processes. Due to restrictions in die level processing, die may not be equivalent to standard package products and
are therefore offered with a conditional performance guarantee. The above data sheet is based on IR sample testing
under certain predetermined and assumed conditions, and are provided for illustration purposes only. Customers are
encouraged to perform testing in actual proposed package and use conditions. IR die products are tested using
IR-based quality assurance procedures and are manufactured using IR’s established processes. Programs for
Customer specified testing are available upon request. IR has experienced assembly yields of generally 95%
or greater for individual die; however, customer’s results will vary. Estimates such as those described and set forth
in this data sheet for semiconductor die will vary depending on a number of packaging, handling, use and other
factors. Sold die may not perform on an equivalent basis to standard package products and are therefore offered with
a limited warranty as described in IR’s applicable standard terms and conditions of sale. All IR die sales are subject
to IR’s applicable standard terms and conditions of sale, which are available upon request. For customers requiring a
particular parameter to be guaranteed, special testing can be carried out or product can Be purchased as known
good die.
Technology qualified in TO247 package according to AEC-Q101.
1 www.irf.com © 2012 International Rectifier
July 11, 2012
1 page  
AUIRGC4066B
IMPORTANT NOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR) reserve
the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services
at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow
automotive industry and / or customer specific requirements with regards to product discontinuance and process change
notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s
standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products
and applications using IR components. To minimize the risks with customer products and applications, customers should
provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with altera-
tions is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Infor-
mation of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or
service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive
business practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into
the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR
product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for
any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, em-
ployees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or
unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product.
Only products certified as military grade by the Defense Logistics Agency (DLA) of the US Department of Defense, are de-
signed and manufactured to meet DLA military specifications required by certain military, aerospace or other applications.
Buyers acknowledge and agree that any use of IR products not certified by DLA as military-grade, in applications requiring
military grade products, is solely at the Buyer’s own risk and that they are solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR
products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designa-
tion “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will
not be responsible for any failure to meet such requirements.
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
101 N. Sepulveda Blvd., El Segundo, California 90245
Tel: (310) 252-7105
5 www.irf.com © 2012 International Rectifier
July 11, 2012
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet AUIRGC4066B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AUIRGC4066B | Insulated Gate Bipolar Transistor | International Rectifier |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |