|
|
Número de pieza | SGP-25S | |
Descripción | 2-jaw parallel self-centering pneumatic gripper | |
Fabricantes | GIMATIC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SGP-25S (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
No Preview Available ! SGP-S
SGP-S
2-jaw parallel self-centering pneumatic gripper
(series SGP-S)
• Double acting.
• Exclusive backlash adjusting system.
• High performance in small dimensions.
• The rugged construction lends itself to heavy duty applications
for a trouble free long life without maintenance.
• Various fastening and air feeding options.
• Prepared for adjustable inductive sensors.
• Food grade grease FDA-H1.
SGP-20S
SGP-25S
SGP-32S
SGP-40S
Medium
Operating pressure range
Operating temperature range
Opening gripping force at 6 bar on each jaw
Opening total gripping force at 6 bar
Closing gripping force at 6 bar on each jaw
Closing total gripping force at 6 bar
Total stroke
(±0.3 mm)
Maximum working frequency
Cycle air consumption
Closing time without load
Repetition accuracy
Weight
244 2-jaw parallel grippers
SGP-20S
SGP-25S
SGP-32S
SGP-40S
Filtered, lubricated / non lubricated compressed air
2 ÷ 8 bar
5° ÷ 60°C.
23 N 52 N 67 N 80 N
46 N
104 N
134 N
160 N
20 N 47 N 60 N 73 N
40 N
94 N
120 N
146 N
4 mm
6 mm
8 mm
12 mm
3 Hz 3 Hz 3 Hz 3 Hz
0.5 cm3
1.4 cm3
2.4 cm3
4.5 cm3
0.01 s
0.01 s
0.02 s
0.05 s
0.02 mm
0.02 mm
0.02 mm
0.02 mm
33 g 43 g 86 g 170 g
www.gimatic.com
1 page SGP-S
Dimensions (mm)
22
==
SGP-32S
1 Hole for inductive sensor Ø4
a 9.5 8.5 2 3 1
2
(N°2) M4x7.5mm
Hole for fastening
25 ±0.02
==
c
32
=
24
=
5
OPEN
=
CLOSED
=
4
5
7
3 (N°2) Ø6H8x2.9mm
Centering sleeve hole
4 Ø4H11x5mm
Through hole for fastening
12 -0.05
==
6
8 ±0.02
4
==
A
21.8
==
10
==
32
==
23 29.5
R28
R6.6
27 ±0.02
==
10
==
7
8
25 max.
30 max.
C 5.4
3.7
5 Stroke each jaw
Ø2H8x5mm
6 Dowel pin hole
7
(N°2) M3x5mm
Hole for fastening
8
Ø2H8x5mm
Dowel pin hole
a
M3
Compressed air in a: gripper opening
A
M5
Compressed air in A: gripper opening
c
M3
Compressed air in c: gripper closing
C
M5
Compressed air in C: gripper closing
248 2-jaw parallel grippers
www.gimatic.com
5 Page SGP-S
Gripping
The gripper is double-acting for either internal (A) or external (B)
gripping applications.
The opening force is higher.
Pressurized chamber
254 2-jaw parallel grippers
www.gimatic.com
11 Page |
Páginas | Total 14 Páginas | |
PDF Descargar | [ Datasheet SGP-25S.PDF ] |
Número de pieza | Descripción | Fabricantes |
SGP-25S | 2-jaw parallel self-centering pneumatic gripper | GIMATIC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |